[PATCH v2 4/5] phy: Add Marvell 88E1116R phy ID

[Michal Simek]

This phy is on Xilinx ZC702 zynq development board.

Signed-off-by: Anirudha Sarangi <anirudh@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
Changes in v2: None

 drivers/net/phy/marvell.c   | 65 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |  1 +
 2 files changed, 66 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 371353c..df5a9f6 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -116,6 +116,8 @@
 #define MII_M1011_PHY_STATUS_RESOLVED	0x0800
 #define MII_M1011_PHY_STATUS_LINK	0x0400

+#define MII_M1116R_CONTROL_REG_MAC	21
+

 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -372,6 +374,55 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 	return m88e1121_config_aneg(phydev);
 }

+static int m88e1116r_config_init(struct phy_device *phydev)
+{
+	int temp;
+	int err;
+
+	temp = phy_read(phydev, MII_BMCR);
+	temp |= BMCR_RESET;
+	err = phy_write(phydev, MII_BMCR, temp);
+	if (err < 0)
+		return err;
+
+	mdelay(500);
+
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+	if (err < 0)
+		return err;
+
+	temp = phy_read(phydev, MII_M1011_PHY_SCR);
+	temp |= (7 << 12);	/* max number of gigabit attempts */
+	temp |= (1 << 11);	/* enable downshift */
+	temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
+	err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
+	if (err < 0)
+		return err;
+	temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
+	temp |= (1 << 5);
+	temp |= (1 << 4);
+	err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
+	if (err < 0)
+		return err;
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+	if (err < 0)
+		return err;
+
+	temp = phy_read(phydev, MII_BMCR);
+	temp |= BMCR_RESET;
+	err = phy_write(phydev, MII_BMCR, temp);
+	if (err < 0)
+		return err;
+
+	mdelay(500);
+
+	return 0;
+}
+
 static int m88e1111_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -940,6 +991,19 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.driver = { .owner = THIS_MODULE },
 	},
+	{
+		.phy_id = MARVELL_PHY_ID_88E1116R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E1116R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1116r_config_init,
+		.config_aneg = &genphy_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
 };

 static int __init marvell_init(void)
@@ -967,6 +1031,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
 	{ MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
 	{ }
 };

diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index dd3c34e..ec41025 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -14,6 +14,7 @@
 #define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
+#define MARVELL_PHY_ID_88E1116R		0x01410e40

 /* struct phy_device dev_flags definitions */
 #define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
--
1.8.2.3

Attachment: pgp00000.pgp
Description: PGP signature