[PATCH v2 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver

[Roger Quadros]

ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Tested-by: Adrien Vergà <adrienverge@xxxxxxxxx>
---
 drivers/usb/host/Kconfig |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7ded784..48e1b70 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,13 +150,11 @@ config USB_EHCI_MXC
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
+	select NOP_USB_XCEIV
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  OMAP3 and later chips.
-	  If your system uses a PHY on the USB port, you will need to
-	  enable USB_PHY and the appropriate PHY driver as well. Most
-	  boards need the NOP_USB_XCEIV PHY driver.
 
 config USB_EHCI_HCD_ORION
 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/