2013/5/31 Wenyou Yang <wenyou.yang@xxxxxxxxx>:Hello,
The patches is to add watchdog device tree node for at91 SoC and board dts files.
Since the watchdog is disabled in the at91bootstrap with default configuration,
if you want to use the watchdog in the kernel, you must make sure the watchdog
doesn't be disabled in the at91bootstrap.
It is tested on at91sam9g20ek, at91sam9263ek, at91sam9g25ek
using Documentation/watchdog/src/watchdog-simple.c.
It is based on v3.10-rc3, tested on linux-watchdog git tree as well.
Best Regards,
Wenyou Yang
Wenyou Yang (2):
ARM: dts: add the watchdog nodes for at91 SoC
ARM: dts: add the watchdog nodes for at91 boards
arch/arm/boot/dts/at91sam9263ek.dts | 4 ++++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 ++++
arch/arm/boot/dts/at91sam9n12.dtsi | 6 ++++++
arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++++
arch/arm/boot/dts/at91sam9x5.dtsi | 6 ++++++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 4 ++++
7 files changed, 32 insertions(+)
--
1.7.9.5
Those patches haven been floating around from quite some time.
Let's merge them !
Tested on sam9g35, v3.10-rc2
Tested-by: Richard Genoud <richard.genoud@xxxxxxxxx>