Re: [PATCH 00/11] MSM DT based multi-platform support
From: Arnd Bergmann
Date: Wed Jun 19 2013 - 11:42:40 EST
On Wednesday 19 June 2013, Stephen Boyd wrote:
> This patchset allows me to compile and run the DT based MSM
> platforms in the multi-platform ARM kernel. This is built on
> top of a couple patches I've sent out already (specifically
> the debug_ll patch series and the clocksource_of conversion)
> as well a patch from Rohit that didn't seem to make it into
> MSM's for-next branch.
> There is one problem though, the last two patches cause compile
> failures if you turn on MSM's sdcc or USB_OTG driver. It seems
> that the sdcc driver depends on the clk_reset() API and the custom
> DMA interface provided by mach layers. And the USB_OTG driver depends
> on clk_reset.
> The simplest solution is to make these two drivers depend on the
> non-dt based MSM support so that they can't be compiled in the
> multi-platform config. Otherwise, we'll need to replace the clk_reset()
> calls with the new reset controller API, but doing that would
> require us to convert all MSM platforms over to devicetree or
> we'll need to add support to the reset controller API for non-DT based
> controllers. Even with that, the sdcc driver uses custom DMA things
> so we may need to put that all behind some #ifdef.
The msm_serial_hs driver also seems to require the custom DMA
I think for the DMA stuff, the solution is clearly to move that
driver to use the dmaengine API, wich I assume you are already
planning to do anyway. Do you have a time line for that?
For the clk_reset interface, maybe you can move those calls int
platform_data callbacks for the non-DT machines to get them out
of the way?
You could have something like
if (pdata && pdata->reset)
That wouldn't be too ugly. For the time being, disabling the
drivers on multiplatform sounds reasonable. I don't think you
actually have to have the drivers conflict with DT support:
you should be able to allow the DT based boards with non-multiplatform
to enable the two or three drivers anyway.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/