AM335x: is AUTORTS mode supported ?

[Mark Jackson]

I'm struggling to determine if AUTORTS mode is currently supported in 3.10 ?

I have dug into the source code, and can see various references to the relevant bits
in the various UART registers, but I'm at a lose as to how to actually *enable* the
mode !!

In drivers/tty/omap-serial.c serial_omap_set_termios() we have:-

	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
		/* Enable AUTORTS and AUTOCTS */
		up->efr |= UART_EFR_CTS | UART_EFR_RTS;

		/* Ensure MCR RTS is asserted */
		up->mcr |= UART_MCR_RTS;
	} else {
		...
	}

So it looks like I need to set the CRTSCTS and UPF_HARD_FLOW flags.

>From userspace, I've tried:-

$ stty -F /dev/ttyO2 crtscts

But I've not idea how to enable UPF_HARD_FLOW !?!

Can anyone point me in the right direction ?

Cheers
Mark J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/