Re: [PATCH 8/8] ARM: shmobile: r8a7740: add DT nodes and clock aliasesfor three DMAC instances

[Sergei Shtylyov]

Hello.

On 07/12/2013 05:43 PM, Guennadi Liakhovetski wrote:

> This patch adds Device Tree support for the three generic DMA controller
> instances on r8a7740 in a DMA multiplexer node.

> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@xxxxxxxxx>
> ---
>   arch/arm/boot/dts/r8a7740.dtsi         |   61 ++++++++++++++++++++++++++++++++
>   arch/arm/mach-shmobile/clock-r8a7740.c |    3 ++
>   2 files changed, 64 insertions(+), 0 deletions(-)

> diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
> index 25dc930..39b596f 100644
> --- a/arch/arm/boot/dts/r8a7740.dtsi
> +++ b/arch/arm/boot/dts/r8a7740.dtsi
> @@ -112,6 +112,67 @@
>   			      0 149 0x4>;
>   	};
>
> +	dmac: dma-mux0 {
> +		compatible = "renesas,shdma-mux";
> +		#dma-cells = <1>;
> +		dma-channels = <6>;
> +		dma-requests = <256>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		dma0: shdma@fe008020 {
> +			compatible = "renesas,shdma-r8a7740";
> +			reg = <0xfe008020 0x270>,
> +				<0xfe009000 0xc>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 34 4
> +					0 28 4
> +					0 29 4
> +					0 30 4
> +					0 31 4
> +					0 32 4
> +					0 33 4>;
> +			interrupt-names = "error",
> +					"ch0", "ch1", "ch2", "ch3",
> +					"ch4", "ch5";
> +		};
> +
> +		dma1: shdma@fe018020 {
> +			compatible = "renesas,shdma-r8a7740";
> +			reg = <0xfe018020 0x270>,
> +				<0xfe019000 0xc>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 41 4
> +					0 35 4
> +					0 36 4
> +					0 37 4
> +					0 38 4
> +					0 39 4
> +					0 40 4>;
> +			interrupt-names = "error",
> +					"ch0", "ch1", "ch2", "ch3",
> +					"ch4", "ch5";
> +		};
> +
> +		dma2: shdma@fe028020 {
> +			compatible = "renesas,shdma-r8a7740";
> +			reg = <0xfe028020 0x270>,
> +				<0xfe029000 0xc>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 48 4
> +					0 42 4
> +					0 43 4
> +					0 44 4
> +					0 45 4
> +					0 46 4
> +					0 47 4>;
> +			interrupt-names = "error",
> +					"ch0", "ch1", "ch2", "ch3",
> +					"ch4", "ch5";
> +		};
> +	};
> +

   According to ePAPR [1] section 2.2.2, "the name of the node should 
be somewhat generic, reflecting the function of the device and not its
precise programming model. If appropriate, the name should be one of the 
following choices:
[...]
- dma-controller;
[...]"

[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
 	
WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/