[PATCH v2 3/5] mfd:rtsx: Move some actions from rtsx_pci_init_hw to individual extra_init_hw

[wei_wang]

From: Wei WANG <wei_wang@xxxxxxxxxxxxxx>

These actions are individual for each reader model, so should be put in
extra_init_hw instead of rtsx_pci_init_hw.

Signed-off-by: Wei WANG <wei_wang@xxxxxxxxxxxxxx>
---
 drivers/mfd/rts5209.c  |    4 ++++
 drivers/mfd/rts5227.c  |    2 ++
 drivers/mfd/rts5229.c  |    4 ++++
 drivers/mfd/rts5249.c  |    2 ++
 drivers/mfd/rtsx_pcr.c |    4 ----
 5 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 524a5c5..e2ee30e 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -69,6 +69,10 @@ static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
 
 	/* Turn off LED */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO, 0xFF, 0x03);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+	/* Force CLKREQ# PIN to drive 0 to request clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
 	/* Configure GPIO as output */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO_DIR, 0xFF, 0x03);
 	/* Configure driving */
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index fd95ab4..c931018 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -100,6 +100,8 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 
 	/* Configure GPIO as output */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
 	/* Switch LDO3318 source from DV33 to card_3v3 */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index b283511..a91462d 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -66,6 +66,10 @@ static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
 
 	/* Configure GPIO as output */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+	/* Force CLKREQ# PIN to drive 0 to request clock */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
 	/* Switch LDO3318 source from DV33 to card_3v3 */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 066d6ff..f18bb27 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -105,6 +105,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
 
 	/* Configure GPIO as output */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+	/* Reset ASPM state to default value */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
 	/* Switch LDO3318 source from DV33 to card_3v3 */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index a178173..13e1c24 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -971,8 +971,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
 	/* Disable card clock */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
-	/* Reset ASPM state to default value */
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
 	/* Reset delink mode */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CHANGE_LINK_STATE, 0x0A, 0);
 	/* Card driving select */
@@ -1002,8 +1000,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 	 *	0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
 	 */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
-	/* Force CLKREQ# PIN to drive 0 to request clock */
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
 
 	err = rtsx_pci_send_cmd(pcr, 100);
 	if (err < 0)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/