[PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration

[Nishanth Menon]

Due to wrong older revision of documentation used as reference, we
seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This
series is based power tree on production board 750-2628-XXX platform.
Unfortunately, the wrong voltages may be detrimental to OMAP5 as they
supply hardware blocks at voltages that are out of specification.

Also available at:
based on v3.11-rc1 tag
http link: https://github.com/nmenon/linux-2.6-playground/commits/push/omap5-palmas-fixes
git link: git://github.com/nmenon/linux-2.6-playground.git
branch: push/omap5-palmas-fixes

Tested with https://patchwork.kernel.org/patch/2545061/
 + https://git.kernel.org/cgit/linux/kernel/git/ssantosh/linux.git/log/?h=for_3.11/out_of_tree/omap5_clk_data
Test result: http://pastebin.com/YqASYkXG

Relevant documentation:
- OMAP5 uEVM documentation: https://www.svtronics.com/omap/omap54xx?product_id=33
- OMAP5432 Data Manual: http://www.ti.com/product/OMAP5432
- TWL6037 / OTP information: Currently available only under NDA

Nishanth Menon (9):
  ARM: dts: omap5-uevm: document regulator signals used on the actual
    board
  ARM: dts: omap5-uevm: update SMPS9 settings
  ARM: dts: omap5-uevm: update and disable unused regulators LDO[28]
  ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings
  ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V
  ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings
  ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3

 arch/arm/boot/dts/omap5-uevm.dts |   78 ++++++++++++++++++++++++--------------
 1 file changed, 49 insertions(+), 29 deletions(-)

-- 
1.7.9.5

Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/