Re: [PATCH v2 00/42] ARM: at91: move to common clk framework

From: boris brezillon
Date: Thu Jul 18 2013 - 04:51:39 EST

Next message: Roger Quadros: "[PATCH 0/6] USB: phy: phy-nop: Use RESET controller for managing the reset line"
Previous message: Jonas Jensen: "[PATCH] Documentation: Add device tree binding file for MOXA ART SoCs interrupt controller"
In reply to: Boris BREZILLON: "[PATCH v2 42/42] ARM: at91/dt: move sama5d3 boards to new at91 clk implem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 17/07/2013 15:34, Boris BREZILLON wrote:

Hello,

This patch series is a proposal to move at91 clock implementation
to common clk framework.

Most of the clock provided by the PMC (Power Management Controller) are
implemented :
- main clock (main oscillator)
- pll clocks
- master clock
- programmable clocks
- utmi clock
- peripheral clocks
- system clocks

This implementation is compatible with device tree: the goal is
to define the whole clock tree in the device tree (all currently
available dt SoCs and boards are patched to support dt clocks).
Please feel free to comment the dt bindinds.

I removed the register_clocks function in SoC supporting dt boards only:
- at91sam9x5 SoCs
- at91sam9n12 SoC
- sama5d3 SoCs

This patch series is based on linux-next and has been tested on sama5d31ek
board using device tree. It compiles for other SoCs and both with and without
dt support, but it has not been tested.

This was tested on kizbox board too.

BTW could other people test it on other boards (I only have a kizbox and
a sama5d31ek dev kit).

Best Regards,
Boris

Changes since v1:
- fix bugs in pll, programmable and system clock implementations
(wrong bit position).
- add usb clock configuration support (ohci and udc drivers +
clk_lookup for non dt boards)
- rework of the system clock interfaces (no need to define a parent clock,
system clock is a gate with no rate info)
- change system, peripheral and programmable clk dt bindings (1 master node
and multiple child nodes each defining a system/peripheral or prog clock)
- fix bugs in sama5 dt definition

Boris BREZILLON (42):
ARM: at91: move at91_pmc.h to include/linux/clk/at91.h
ARM: at91: add PMC main clock
ARM: at91: add PMC pll clocks
ARM: at91: add PMC master clock
ARM: at91: add PMC system clocks
ARM: at91: add PMC peripheral clocks
ARM: at91: add PMC programmable clocks
ARM: at91: add PMC utmi clock
ARM: at91: add PMC usb clock
ARM: at91: add PMC smd clock
ARM: at91: add PMC clk device tree binding doc.
ARM: at91: move to common clk framework
ARM: at91: move at91rm9200 SoC to new at91 clk implem
ARM: at91: move at91sam9260 SoC to new at91 clk implem
ARM: at91: move at91sam9261 SoC to new at91 clk implem
ARM: at91: move at91sam9263 SoC to new at91 clk implem
ARM: at91: move at91sam9g45 SoC to new at91 clk implem
ARM: at91: move at91sam9n12 SoC to new at91 clk implem
ARM: at91: move at91sam9rl SoC to new at91 clk implem
ARM: at91: move at91sam9x5 SoCs to new at91 clk implem
ARM: at91: move at91sam9 SoCs to new at91 clk implem
ARM: at91: move sama5d3 SoCs to new at91 clk implem
ARM: at91: move at91rm9200 boards to new at91 clk implem
ARM: at91: move at91sam9 boards to new at91 clk implem
ARM: at91: move pit timer to common clk framework
USB: ohci-at91: add usb_clk for transition to common clk framework
usb: gadget: at91_udc: add usb_clk for transition to common clk
framework
ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem
ARM: at91/dt: move at91sam9260 SoC to new at91 clk implem
ARM: at91/dt: move at91sam9263 SoC to new at91 clk implem
ARM: at91/dt: move at91sam9g45 SoC to new at91 clk implem
ARM: at91/dt: move at91sam9n12 SoC to new at91 clk implem
ARM: at91/dt: move at91sam9x5 SoCs to new at91 clk implem
ARM: at91/dt: move at91sam9g20 SoC to new at91 clk implem
ARM: at91/dt: move sama5d3 SoCs to new at91 clk implem
ARM: at91/dt: move sam9260/sam9g20 to new at91 clk implem
ARM: at91/dt: move rm9200 boards to new at91 clk implem
ARM: at91/dt: move sam9263 boards to new at91 clk implem
ARM: at91/dt: move sam9g45 boards to new at91 clk implem
ARM: at91/dt: move sam9n12 boards to new at91 clk implem
ARM: at91/dt: move sam9x5 boards to new at91 clk implem
ARM: at91/dt: move sama5d3 boards to new at91 clk implem

.../devicetree/bindings/clock/at91-clock.txt | 262 ++++++
arch/arm/boot/dts/animeo_ip.dts | 17 +-
arch/arm/boot/dts/at91-ariag25.dts | 17 +-
arch/arm/boot/dts/at91rm9200.dtsi | 231 +++++
arch/arm/boot/dts/at91rm9200ek.dts | 17 +-
arch/arm/boot/dts/at91sam9260.dtsi | 236 +++++
arch/arm/boot/dts/at91sam9263.dtsi | 237 +++++
arch/arm/boot/dts/at91sam9263ek.dts | 17 +-
arch/arm/boot/dts/at91sam9g15.dtsi | 1 +
arch/arm/boot/dts/at91sam9g20.dtsi | 37 +
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 17 +-
arch/arm/boot/dts/at91sam9g25.dtsi | 3 +
arch/arm/boot/dts/at91sam9g35.dtsi | 2 +
arch/arm/boot/dts/at91sam9g45.dtsi | 257 +++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 17 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 251 +++++
arch/arm/boot/dts/at91sam9n12ek.dts | 17 +-
arch/arm/boot/dts/at91sam9x25.dtsi | 25 +-
arch/arm/boot/dts/at91sam9x35.dtsi | 3 +
arch/arm/boot/dts/at91sam9x5.dtsi | 319 +++++--
arch/arm/boot/dts/at91sam9x5_can.dtsi | 26 +
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 22 +
arch/arm/boot/dts/at91sam9x5_lcdc.dtsi | 28 +
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 66 ++
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 54 ++
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 58 ++
arch/arm/boot/dts/ge863-pro3.dtsi | 16 +-
arch/arm/boot/dts/kizbox.dts | 5 +
arch/arm/boot/dts/mpa1600.dts | 16 +-
arch/arm/boot/dts/pm9g45.dts | 16 +-
arch/arm/boot/dts/sama5d3.dtsi | 510 ++++++----
arch/arm/boot/dts/sama5d31ek.dts | 4 +
arch/arm/boot/dts/sama5d33ek.dts | 2 +
arch/arm/boot/dts/sama5d34ek.dts | 4 +
arch/arm/boot/dts/sama5d35ek.dts | 6 +
arch/arm/boot/dts/sama5d3_can.dtsi | 71 ++
arch/arm/boot/dts/sama5d3_emac.dtsi | 54 ++
arch/arm/boot/dts/sama5d3_gmac.dtsi | 87 ++
arch/arm/boot/dts/sama5d3_lcd.dtsi | 69 ++
arch/arm/boot/dts/sama5d3_mci2.dtsi | 57 ++
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 38 +
arch/arm/boot/dts/sama5d3_uart.dtsi | 46 +
arch/arm/boot/dts/sama5d3xcm.dtsi | 17 +-
arch/arm/boot/dts/tny_a9260_common.dtsi | 17 +-
arch/arm/boot/dts/tny_a9263.dts | 17 +-
arch/arm/boot/dts/usb_a9260_common.dtsi | 17 +-
arch/arm/boot/dts/usb_a9263.dts | 17 +-
arch/arm/mach-at91/Kconfig | 26 +
arch/arm/mach-at91/Makefile | 2 +-
arch/arm/mach-at91/at91rm9200.c | 568 +++++++-----
arch/arm/mach-at91/at91sam9260.c | 689 +++++++++-----
arch/arm/mach-at91/at91sam9261.c | 572 ++++++++----
arch/arm/mach-at91/at91sam9263.c | 595 +++++++-----
arch/arm/mach-at91/at91sam926x_time.c | 21 +-
arch/arm/mach-at91/at91sam9g45.c | 704 ++++++++------
arch/arm/mach-at91/at91sam9g45_devices.c | 1 -
arch/arm/mach-at91/at91sam9n12.c | 196 +---
arch/arm/mach-at91/at91sam9rl.c | 502 ++++++----
arch/arm/mach-at91/at91sam9x5.c | 293 +-----
arch/arm/mach-at91/board-1arm.c | 12 +-
arch/arm/mach-at91/board-afeb-9260v1.c | 11 +-
arch/arm/mach-at91/board-cam60.c | 13 +-
arch/arm/mach-at91/board-carmeva.c | 13 +-
arch/arm/mach-at91/board-cpu9krea.c | 12 +-
arch/arm/mach-at91/board-cpuat91.c | 12 +-
arch/arm/mach-at91/board-csb337.c | 11 +-
arch/arm/mach-at91/board-csb637.c | 11 +-
arch/arm/mach-at91/board-dt-rm9200.c | 9 +-
arch/arm/mach-at91/board-dt-sam9.c | 9 +-
arch/arm/mach-at91/board-dt-sama5.c | 9 +-
arch/arm/mach-at91/board-eb9200.c | 11 +-
arch/arm/mach-at91/board-ecbat91.c | 12 +-
arch/arm/mach-at91/board-eco920.c | 13 +-
arch/arm/mach-at91/board-flexibity.c | 12 +-
arch/arm/mach-at91/board-foxg20.c | 12 +-
arch/arm/mach-at91/board-gsia18s.c | 8 +-
arch/arm/mach-at91/board-kafa.c | 12 +-
arch/arm/mach-at91/board-kb9202.c | 12 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 9 +-
arch/arm/mach-at91/board-picotux200.c | 11 +-
arch/arm/mach-at91/board-qil-a9260.c | 11 +-
arch/arm/mach-at91/board-rm9200ek.c | 11 +-
arch/arm/mach-at91/board-rsi-ews.c | 12 +-
arch/arm/mach-at91/board-sam9-l9260.c | 11 +-
arch/arm/mach-at91/board-sam9260ek.c | 11 +-
arch/arm/mach-at91/board-sam9261ek.c | 15 +-
arch/arm/mach-at91/board-sam9263ek.c | 11 +-
arch/arm/mach-at91/board-sam9g20ek.c | 15 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 11 +-
arch/arm/mach-at91/board-sam9rlek.c | 11 +-
arch/arm/mach-at91/board-snapper9260.c | 12 +-
arch/arm/mach-at91/board-stamp9g20.c | 15 +-
arch/arm/mach-at91/board-yl-9200.c | 12 +-
arch/arm/mach-at91/clock.c | 977 --------------------
arch/arm/mach-at91/clock.h | 49 -
arch/arm/mach-at91/generic.h | 10 +-
arch/arm/mach-at91/pm.c | 2 +-
arch/arm/mach-at91/pm_slowclock.S | 2 +-
arch/arm/mach-at91/pmc.c | 58 ++
arch/arm/mach-at91/sama5d3.c | 344 +------
arch/arm/mach-at91/setup.c | 38 +-
arch/arm/mach-at91/stamp9g20.h | 2 +-
drivers/clk/Makefile | 1 +
drivers/clk/at91/Makefile | 11 +
drivers/clk/at91/clk-main.c | 106 +++
drivers/clk/at91/clk-master.c | 317 +++++++
drivers/clk/at91/clk-peripheral.c | 371 ++++++++
drivers/clk/at91/clk-pll.c | 438 +++++++++
drivers/clk/at91/clk-plldiv.c | 125 +++
drivers/clk/at91/clk-programmable.c | 368 ++++++++
drivers/clk/at91/clk-smd.c | 157 ++++
drivers/clk/at91/clk-system.c | 184 ++++
drivers/clk/at91/clk-usb.c | 303 ++++++
drivers/clk/at91/clk-utmi.c | 114 +++
drivers/usb/gadget/at91_udc.c | 31 +-
drivers/usb/gadget/at91_udc.h | 2 +-
drivers/usb/gadget/atmel_usba_udc.c | 2 +-
drivers/usb/host/ohci-at91.c | 16 +-
.../mach/at91_pmc.h => include/linux/clk/at91.h | 116 ++-
119 files changed, 8193 insertions(+), 3835 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/at91-clock.txt
create mode 100644 arch/arm/boot/dts/at91sam9x5_can.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_isi.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_lcdc.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_can.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_emac.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_gmac.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_lcd.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_mci2.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_tcb1.dtsi
create mode 100644 arch/arm/boot/dts/sama5d3_uart.dtsi
delete mode 100644 arch/arm/mach-at91/clock.c
delete mode 100644 arch/arm/mach-at91/clock.h
create mode 100644 arch/arm/mach-at91/pmc.c
create mode 100644 drivers/clk/at91/Makefile
create mode 100644 drivers/clk/at91/clk-main.c
create mode 100644 drivers/clk/at91/clk-master.c
create mode 100644 drivers/clk/at91/clk-peripheral.c
create mode 100644 drivers/clk/at91/clk-pll.c
create mode 100644 drivers/clk/at91/clk-plldiv.c
create mode 100644 drivers/clk/at91/clk-programmable.c
create mode 100644 drivers/clk/at91/clk-smd.c
create mode 100644 drivers/clk/at91/clk-system.c
create mode 100644 drivers/clk/at91/clk-usb.c
create mode 100644 drivers/clk/at91/clk-utmi.c
rename arch/arm/mach-at91/include/mach/at91_pmc.h => include/linux/clk/at91.h (78%)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Roger Quadros: "[PATCH 0/6] USB: phy: phy-nop: Use RESET controller for managing the reset line"
Previous message: Jonas Jensen: "[PATCH] Documentation: Add device tree binding file for MOXA ART SoCs interrupt controller"
In reply to: Boris BREZILLON: "[PATCH v2 42/42] ARM: at91/dt: move sama5d3 boards to new at91 clk implem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]