Re: [PATCH] x86, apic: Enable x2APIC physical when cpu < 256 native

[Yinghai Lu]

On Tue, Jul 23, 2013 at 11:22 PM, Gleb Natapov <gleb@xxxxxxxxxx> wrote:
> On Tue, Jul 23, 2013 at 09:24:45PM -0700, Yinghai Lu wrote:
>> On Thu, Jul 11, 2013 at 6:22 PM, Youquan Song <youquan.song@xxxxxxxxx> wrote:
>> > x2APIC extends APICID from 8 bits to 32 bits, but the device interrupt routed
>> > from IOAPIC or delivered in MSI mode will keep 8 bits destination APICID.
>> > In order to support x2APIC, the VT-d interrupt remapping is introduced to
>> > translate the destination APICID to 32 bits in x2APIC mode and keep the device
>> > compatible in this way.
>> >
>> > x2APIC support both logical and physical mode in destination mode.
>> > In logical destination mode, the 32 bits Logical APICID has 2 sub-fields:
>> >  16 bits cluster ID and 16 bits logical ID within the cluster and it is
>> > required VT-d interrupt remapping in x2APIC cluster mode.
>> > In physical destination mode, the 8 bits physical id is compatible with 32
>> > bits physical id when CPU number < 256.
>> > When interrupt remapping initialization fail on platform with CPU number < 256,
>> > current kernel only enables x2APIC physical mode in virutalization environment,
>> > while we also can enable x2APIC physcial mode in native kernel this situation,
>> > and the device interrupt will use 8 bits destination APICID in physical mode
>> > and be compatible with x2APIC physical when < 256 CPUs.
>> >
>> > So we can benefit from x2APIC vs xAPIC MMIO:
>> >  - x2APIC MSR read/write is faster than xAPIC mmio
>> >  - x2APIC only ICR write to deliver interrupt without polling ICR deliver
>> >    status bit and xAPIC need poll to read ICR deliver status bit.
>> >  - x2APIC 64 bits ICR access instead of xAPIC two 32 bits access.
>> >
>> > Signed-off-by: Youquan Song <youquan.song@xxxxxxxxx>
>> > ---
>> >  arch/x86/kernel/apic/apic.c |    7 ++-----
>> >  1 files changed, 2 insertions(+), 5 deletions(-)
>> >
>> > diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
>> > index 904611b..51a065a 100644
>> > --- a/arch/x86/kernel/apic/apic.c
>> > +++ b/arch/x86/kernel/apic/apic.c
>> > @@ -1603,11 +1603,8 @@ void __init enable_IR_x2apic(void)
>> >                 goto skip_x2apic;
>> >
>> >         if (ret < 0) {
>> > -               /* IR is required if there is APIC ID > 255 even when running
>> > -                * under KVM
>> > -                */
>> > -               if (max_physical_apicid > 255 ||
>> > -                   !hypervisor_x2apic_available()) {
>> > +               /* IR is required if there is APIC ID > 255 */
>> > +               if (max_physical_apicid > 255) {
>> >                         if (x2apic_preenabled)
>> >                                 disable_x2apic();
>> >                         goto skip_x2apic;
>>
>> Those are kvm and xen related.
>>
> This change does not affect kvm or xen since they already enable x2apic
> without IR. But back then when I added the apicid > 255 check I had to
> add the hypervisor check too because I was told by Intel that x2apic
> without IR is not architectural. Seeing that this patch comes from Intel
> engineer it is possible that things changed since then.

Yes. It would be great, if Youquan can point out where is the intel doc
about the change.

Also if the patch can move on,  hypervisor_x2apic_available() related
declaration and define
could be dropped.

Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/