[PATCH v2 0/4] LP3943 MFD driver for a GPIO expander and a PWMgenerator

[Kim, Milo]

LP3943 is an integrated device capable of driving 16 output channels.
It can be used for GPIO expander and PWM generators.
LP3493 registers are controlled via the I2C interface.

This patch-set consists of four parts - MFD, GPIO, PWM and device tree bindings.

Milo Kim (4):
  mfd: add LP3943 MFD driver
  gpio: add LP3943 I2C GPIO expander driver
  pwm: add LP3943 PWM driver
  Documentation: dt: bindings: add LP3943 bindings

 .../devicetree/bindings/gpio/gpio-lp3943.txt       |   42 +++
 Documentation/devicetree/bindings/mfd/lp3943.txt   |   33 ++
 .../devicetree/bindings/pwm/pwm-lp3943.txt         |   65 ++++
 drivers/gpio/Kconfig                               |    8 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-lp3943.c                         |  242 ++++++++++++++
 drivers/mfd/Kconfig                                |   11 +
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/lp3943.c                               |  165 ++++++++++
 drivers/pwm/Kconfig                                |   10 +
 drivers/pwm/Makefile                               |    1 +
 drivers/pwm/pwm-lp3943.c                           |  348 ++++++++++++++++++++
 include/linux/mfd/lp3943.h                         |  115 +++++++
 13 files changed, 1042 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
 create mode 100644 drivers/gpio/gpio-lp3943.c
 create mode 100644 drivers/mfd/lp3943.c
 create mode 100644 drivers/pwm/pwm-lp3943.c
 create mode 100644 include/linux/mfd/lp3943.h

-- 
1.7.9.5


Best Regards,
Milo

èº{.nÇ+‰·Ÿ®‰­†+%ŠËlzwm…ébëæìr¸›zX§»®w¥Š{ayºÊÚë,j­¢f£¢·hš‹àz¹®w¥¢¸¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾«‘êçzZ+ƒùšŽŠÝj"ú!¶iO•æ¬z·švØ^¶m§ÿðÃnÆàþY&—