[PATCH] drm/i915: add fast boot support for Haswell

[Furquan Shaikh]

Enables getting correct mode clock when reading pipe config

Signed-off-by: Furquan Shaikh <furquan@xxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_ddi.c     | 8 ++++++++
 drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 931b4bb..fa0af9b 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1269,6 +1269,7 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
+	int port = intel_ddi_get_encoder_port(encoder);
 	u32 temp, flags = 0;
 
 	temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
@@ -1282,6 +1283,13 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	if (port == PORT_A) {
+		if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
+			pipe_config->port_clock = 162000;
+		else
+			pipe_config->port_clock = 270000;
+	}
 }
 
 static void intel_ddi_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e66f05..681c99a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7176,6 +7176,8 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 		pipe_config->pixel_multiplier;
 }
 
+#define div_ceil(A, B) ((A)/(B) + ((A)%(B) ? 1 : 0))
+
 static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
 				    struct intel_crtc_config *pipe_config)
 {
@@ -7218,7 +7220,11 @@ static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
 		return;
 
 	clock = ((u64)link_m * (u64)link_freq * (u64)repeat);
-	do_div(clock, link_n);
+	/* This is required because the value comes out to be in fraction
+	   (eg. 70699.54). Need to round it up since values are compared in
+	   drm_mode_equal
+	*/
+	clock = div_ceil(clock, link_n);
 
 	pipe_config->adjusted_mode.clock = clock;
 }
@@ -9588,6 +9594,7 @@ static void intel_init_display(struct drm_device *dev)
 
 	if (HAS_DDI(dev)) {
 		dev_priv->display.get_pipe_config = haswell_get_pipe_config;
+		dev_priv->display.get_clock = ironlake_crtc_clock_get;
 		dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
-- 
1.8.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/