[PATCH 2/2] ARM: tegra: use dt-binding header for key code

[Laxman Dewangan]

In place of hardcoding the key code in DTS file and comment the key code
as side notes, use the key code macro defines in the dt-bindings/input/input.h
directly.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
 arch/arm/boot/dts/tegra114-dalmore.dts |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 7c50d37..c56bf2d 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra114.dtsi"
 
 / {
@@ -1084,26 +1085,26 @@
 		home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <102>; /* KEY_HOME */
+			linux,code = <KEY_HOME>;
 		};
 
 		power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <116>; /* KEY_POWER */
+			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
 
 		volume_down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
 		volume_up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
+			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
 
-- 
1.7.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/