Re: [PATCH] usb: dwc3: core: clarify usb-phy array binding

[Mark Rutland]

On Fri, Aug 09, 2013 at 04:40:32PM +0100, Kumar Gala wrote:
> The binding spec wasn't clear that the order of the phandles in the
> usb-phy array has meaning.  Clarify this point in the binding that
> it should be <USB2-HS-PHY, USB3-SS-PHY>.
> 
> Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/dwc3.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> index 7a95c65..8a9770b 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -6,7 +6,9 @@ Required properties:
>   - compatible: must be "synopsys,dwc3"
>   - reg : Address and length of the register set for the device
>   - interrupts: Interrupts used by the dwc3 controller.
> - - usb-phy : array of phandle for the PHY device
> + - usb-phy : array of phandle for the PHY device.  The first element
> +   in the array is expected to be a handle to the USB2/HS PHY and
> +   the second element is expected to be a handle to the USB3/SS PHY

Just to check - it's not valid to have a USB3 phy without a USB2 phy?

Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/