Re: [PATCH v5 1/2] ARM: davinci: da850: add DT node for ethernet

[Sergei Shtylyov]

Hello.

On 08/16/2013 06:11 PM, Lad, Prabhakar wrote:

> From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>

> Add ethernet device tree node information and pinmux for mii to da850 by
> providing interrupt details and local mac address.

> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> ---
>   arch/arm/boot/dts/da850-evm.dts |    5 +++++
>   arch/arm/boot/dts/da850.dtsi    |   30 ++++++++++++++++++++++++++++++
>   2 files changed, 35 insertions(+)

> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 1f8cfdd..44f3fbc 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -96,6 +96,11 @@
>   			pinctrl-0 = <&mdio_pins>;
>   			bus_freq = <2200000>;
>   		};
> +		ethernet: emac@1e20000 {

   Why label the node in the board file too?

> +			status = "okay";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&mii_pins>;
> +		};
>   	};
>   	nand_cs3@62000000 {
>   		status = "okay";
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index d5138b4..a5d30d9 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
[...]
> @@ -226,6 +242,20 @@
>   			#size-cells = <0>;
>   			reg = <0x224000 0x1000>;
>   		};
> +		ethernet: emac@1e20000 {

   I said node should be named "ethernet", not labelled. You're the second 
person that doesn't know the difference between the two. :-)

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/