Re: [PATCH] block: support embedded device command line partition

From: Stephen Warren
Date: Mon Aug 19 2013 - 12:05:37 EST


On 08/19/2013 02:36 AM, Caizhiyong wrote:
>> On 08/15/2013 08:54 PM, Caizhiyong wrote:
>>>>> +blkdevparts=<blkdev-def>[;<blkdev-def>]
>>>>> + <blkdev-def> := <blkdev-id>:<partdef>[,<partdef>]
>>>>> + <partdef> := <size>[@<offset>](part-name)
>>>>> +
>>>>> +<blkdev-id>
>>>>> + block device disk name, embedded device used fixed block device,
>>>>> + it's disk name also fixed. such as: mmcblk0, mmcblk1, mmcblk0boot0.
>>>>
>>>> The device-name isn't always fixed.
>>>>
>>>> For example, what if there are multiple SDHCI controllers, one hosting a
>>>> fixed eMMC device and the other an SD card? It's quite typical for the
>>>> eMMC's device name (which is likely what should be affected by this
>>>> feature) to be mmcblk0 when no SD card is present, yet be mmcblk1 when
>>>> an SD card is present. Is there a more precise/stable way to define
>>>> which device the command-line option applies to?
>>>
>>> Yes. Fixed is for single controller.
>>> For multiple controllers, currently, there is not a simple way.
>>> I tend to do something in the eMMC driver, such as initialize order,
>>> but I have not tried.
>>
>> There have been proposals before to try and create a fixed naming for
>> the controllers (or rather the block devices they generate...) but
>> they've been rejected. I don't think we should rely on being able to do
>> that.
>>
>>>>> +
>>>>> +<offset>
>>>>> + partition start address, in bytes.
>>>>> +
>>>>> +(part-name)
>>>>> + partition name, kernel send uevent with "PARTNAME". application can create
>>>>> + a link to block device partition with the name "PARTNAME".
>>>>> + user space application can access partition by partition name.
>>>>
>>>> Do partitions usually have a PARTNAME attribute when probed through
>>>> normal mechanisms like MBR? If so, I guess this is fine.
>>>>
>>>> Perhaps we can just use , as the delimiter for all fields, rather than
>>>> special-casing part-name to use (), so:
>>>>
>>>> size,offset,partname,size,offset,partname,...
>>>>
>>>> The partname field could easily be empty if not needed.
>>>
>>> If no need partname, your bootargs are mmcblk0:1G,1G,1G,...
>>
>> Well, you always need the offset too. I don't think there's any harm in
>> forcing all fields to be specified in all cases; it makes the whole
>> system much more regular and less error-prone.
>>
>> Alternatively, use a different separator between fields for a given
>> partition, and between partitions, e.g.:
>>
>> size,offset,partname;size,offset,partname
>>
>> That way, you know that if you see a ; you're looking at a new
>> partition, and hence the partname field need not always be specified.
>> Although, if you want to specify a partname but not an offset you'd
>> still need empty fields, so just requiring all fields to always be
>> present still seems safest to me.
>
> I just follow MTD cmdline partition format.(reference drivers/mtd/cmdlinepart.c)

Ah OK, consistency with an existing format used for similar purposes
probably does override any other concerns.

> There are many pitfalls in using this partition format, the designer is more
> consideration its ease of use, rather than safe.
> There is an other conversation: https://lkml.org/lkml/2013/8/3/16

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/