[PATCH] usb: xhci-plat: Enable USB 2.0 hardware LPM support for platform xHCs

[Julius Werner]

The driver methods required for hardware LPM have only been added to the
PCI version of the XHCI driver, for no apparent reason. They seem to
work just as well with the platform driver, so let's add them to give
more devices the chance for additional power savings. Tested on the DWC3
xHC of an Exynos5420.

Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
---
 drivers/usb/host/xhci-plat.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 51e22bf..7f46b5d 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -80,6 +80,10 @@ static const struct hc_driver xhci_plat_xhci_driver = {
 	.hub_status_data =	xhci_hub_status_data,
 	.bus_suspend =		xhci_bus_suspend,
 	.bus_resume =		xhci_bus_resume,
+
+	/* LPM support */
+	.update_device =	xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
 };
 
 static int xhci_plat_probe(struct platform_device *pdev)
-- 
1.7.12.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/