Re: [PATCH v2 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070support

[Nicolas Ferre]

On 11/07/2013 05:30, Bo Shen :
> this patch is based on linux master branch, implementation as following:
>    - add the i2c pinctrl which needed for using at91sam9n12 TWI
>    - enable qt1070
>    - trival fix for the gpio-key pin number

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

On the whole series.

> Changes in v2:
>    - remove comments as use micro
>    - using micro for interrupt trigger mode
>
> Bo Shen (3):
>    arm: atmel: at91sam9n12: add pinctrl of TWI

Beware:
1/ "arm" in upper case
2/ not "atmel" as second identifier but "at91" (lower case)

>    arm: atmel: at91sam9n12: add qt1070 support
>    arm: atmel: at91sam9n12: correct pin number of gpio-key
>
>   arch/arm/boot/dts/at91sam9n12.dtsi  |   20 ++++++++++++++++++++
>   arch/arm/boot/dts/at91sam9n12ek.dts |   18 +++++++++++++++++-
>   2 files changed, 37 insertions(+), 1 deletion(-)


--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/