Re: Asus F5RL laptop unable to resume from S3 because of radeon module

From: Ondrej Zary
Date: Mon Aug 26 2013 - 17:23:36 EST

Next message: Joe Perches: "Re: [PATCH RESEND V3 net-next 2/3] net: huawei_cdc_ncm: Introducethe huawei_cdc_ncm driver"
Previous message: Christoph Lameter: "[guv v2 31/31] Remove __get_cpu_var and __raw_get_cpu_var macros"
In reply to: Ondrej Zary: "Re: Asus F5RL laptop unable to resume from S3 because of radeon module"
Next in thread: Deucher, Alexander: "RE: Asus F5RL laptop unable to resume from S3 because of radeonmodule"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Monday 26 August 2013 00:01:11 Ondrej Zary wrote:
> On Sunday 25 August 2013 19:12:32 Ondrej Zary wrote:
> > On Sunday 25 August 2013 16:51:06 Deucher, Alexander wrote:
> > > > -----Original Message-----
> > > > From: Ondrej Zary [mailto:linux@xxxxxxxxxxxxxxxxxxxx]
> > > > Sent: Friday, August 23, 2013 1:55 PM
> > > > To: Deucher, Alexander
> > > > Cc: Kernel development list
> > > > Subject: Re: Asus F5RL laptop unable to resume from S3 because of
> > > > radeon module
> > > >
> > > > On Friday 23 August 2013 00:08:33 Ondrej Zary wrote:
> > > > > On Thursday 22 August 2013 22:56:03 Ondrej Zary wrote:
> > > > > > On Thursday 22 August 2013 22:24:17 Deucher, Alexander wrote:
> > > > > > > > -----Original Message-----
> > > > > > > > From: Ondrej Zary [mailto:linux@xxxxxxxxxxxxxxxxxxxx]
> > > > > > > > Sent: Thursday, August 22, 2013 4:00 PM
> > > > > > > > To: Deucher, Alexander
> > > > > > > > Cc: Kernel development list
> > > > > > > > Subject: Re: Asus F5RL laptop unable to resume from S3
> > > > > > > > because of radeon module
> > > > > > > >
> > > > > > > > On Thursday 22 August 2013 21:49:41 Deucher, Alexander wrote:
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Ondrej Zary [mailto:linux@xxxxxxxxxxxxxxxxxxxx]
> > > > > > > > > > Sent: Thursday, August 22, 2013 2:18 PM
> > > > > > > > > > To: Kernel development list
> > > > > > > > > > Cc: Deucher, Alexander
> > > > > > > > > > Subject: Asus F5RL laptop unable to resume from S3
> > > > > > > > > > because of radeon module
> > > > > > > > > >
> > > > > > > > > > Hello,
> > > > > > > > > > resume from suspend-to-RAM (S3) on Asus F5RL laptop does
> > > > > > > > > > not work. According to many reports found by Google, it
> > > > > > > > > > was always been that and there
> > > > > > > > > > is no fix or workaround.
> > > > > > > > >
> > > > > > > > > Make sure your kernel has this patch:
> > > > > > > > > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.
> > > > > > > > >gi t/ comm it /? id=c
> > > > > > > > > ef1d00cd56f600121ad121875655ad410a001b8
> > > > > > > >
> > > > > > > > Just tried latest git (3.11-rc6+) and the problem persists.
> > > > > > >
> > > > > > > You might try adding a quirk for your system in
> > > > > > > radeon_combios_asic_init() in radeon_combios.c. You can try
> > > >
> > > > something
> > > >
> > > > > > > like this for testing:
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/radeon/radeon_combios.c
> > > > > > > b/drivers/gpu/drm/radeon/radeon_combios.c index
> > > > > > > 68ce360..0419a2c
> > > >
> > > > 100644
> > > >
> > > > > > > --- a/drivers/gpu/drm/radeon/radeon_combios.c
> > > > > > > +++ b/drivers/gpu/drm/radeon/radeon_combios.c
> > > > > > > @@ -3398,6 +3398,8 @@ void radeon_combios_asic_init(struct
> > > >
> > > > drm_device
> > > >
> > > > > > > *dev) rdev->pdev->subsystem_device == 0x30ae)
> > > > > > > return;
> > > > > > >
> > > > > > > + return;
> > > > > > > +
> > > > > > > /* DYN CLK 1 */
> > > > > > > table = combios_get_table_offset(dev,
> > > >
> > > > COMBIOS_DYN_CLK_1_TABLE);
> > > >
> > > > > > > if (table)
> > > > > > >
> > > > > > > If that doesn't work, you'll probably have to track down where
> > > > > > > it's hanging during resume, or compare registers before and
> > > > > > > after resume
> > > >
> > > > to
> > > >
> > > > > > > see if it's some particular state that's causing a problem.
> > > > > >
> > > > > > No change.
> > > > > >
> > > > > > Inserted "return -1;" before radeon_device_init() to
> > > > > > radeon_driver_load_kms() - driver fails to load and resume works.
> > > > > > Moved it (and changed to "r = -1; goto out;") a bit down before
> > > > > > radeon_modeset_init() - driver fails to load and resume stopped
> > > >
> > > > working.
> > > >
> > > > > Going deeper... it works before rs400_startup() and does not work
> > > > > after that. Will continue later.
> > > >
> > > > Tracked the problem down to rs400_gart_enable(). When this "Disable
> > > > AGP mode"
> > > > code is commented out, the machine resumes fine:
> > > >
> > > > if ((rdev->family == CHIP_RS690) || (rdev->family ==
> > > > CHIP_RS740)) { WREG32_MC(RS480_MC_MISC_CNTL,
> > > > (RS480_GART_INDEX_REG_EN |
> > > > RS690_BLOCK_GFX_D3_EN)); } else {
> > > > WREG32_MC(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN);
> > > > }
> > >
> > > Does the driver work properly after resume with that part commented out
> > > or does it just avoid the hang?
> >
> > Console seems to work fine, haven't tested X, 3D or video.
>
> Testing it right now - everything seems to work. X, accelerated video
> (mplayer), 3D (glxgears). Both before and after suspend.
> That code does something with GART so maybe I should test something like
> OpenArena (have to download it first).

OpenArena works fine with the code commented out. Both before and after
suspend.

> > > Alex
> > >
> > > > > > > Alex
> > > > > > >
> > > > > > > > > Alex
> > > > > > > > >
> > > > > > > > > > Did some tests:
> > > > > > > > > >
> > > > > > > > > > radeon module loaded (usual state):
> > > > > > > > > > After "echo mem>/sys/power/state", the laptop suspends
> > > >
> > > > correctly
> > > >
> > > > > > > > (power
> > > > > > > >
> > > > > > > > > > LED
> > > > > > > > > > blinks). When power button is pressed, power LED goes on
> > > > > > > > > > and that's all. No more activity, machine is frozen
> > > > > > > > > > completely.
> > > > > > > > > >
> > > > > > > > > > radeon module not loaded at all:
> > > > > > > > > > Laptop resumes correctly (keyboard LED work, network
> > > > > > > > > > works),
> > > >
> > > > only
> > > >
> > > > > > > > > > the
> > > > > > > >
> > > > > > > > LCD
> > > > > > > >
> > > > > > > > > > is
> > > > > > > > > > blank (obviously). Loading radeon module now initializes
> > > > > > > > > > the card properly: LCD goes on and console works.
> > > > > > > > > >
> > > > > > > > > > radeon module loaded (but fbcon module not loaded) and
> > > > > > > > > > then
> > > > > > > >
> > > > > > > > unloaded:
> > > > > > > > > > Machine freezes the same way as when the module is
> > > > > > > > > > loaded.
> > > > > > > > > >
> > > > > > > > > > So it looks like the radeon module does some
> > > > > > > > > > initialization that prevents resume from working.
> > > > > > > > > >
> > > > > > > > > > Hibernation works fine.
> > > > > > > > > >
> > > > > > > > > > Any ideas what to test or how to debug this?
> > > > > > > > > >
> > > > > > > > > > Details:
> > > > > > > > > > 01:05.0 VGA compatible controller [0300]: Advanced Micro
> > > >
> > > > Devices,
> > > >
> > > > > > > > > > Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M]
> > > >
> > > > [1002:5a62]
> > > >
> > > > > > > > > > (prog-if
> > > > > > > >
> > > > > > > > 00
> > > > > > > >
> > > > > > > > > > [VGA controller])
> > > > > > > > > > Subsystem: ASUSTeK Computer Inc. Device
> > > > > > > > > > [1043:1402] Flags: bus master, 66MHz, medium devsel,
> > > > > > > > > > latency 64, IRQ 10 Memory at c0000000 (32-bit,
> > > > > > > > > > prefetchable) [size=256M] I/O ports at 9800 [size=256]
> > > > > > > > > > Memory at fa8f0000 (32-bit, non-prefetchable)
> > > > > > > > > > [size=64K] Expansion ROM at fa8c0000 [disabled]
> > > > > > > > > > [size=128K] Capabilities: [50] Power Management version 2
> > > > > > > > > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable-
> > > > > > > > > > 64bit- Kernel driver in use: radeon
> > > > > > > > > >
> > > > > > > > > > [ 4.836009] [drm] radeon kernel modesetting enabled.
> > > > > > > > > > [ 4.837169] [drm] initializing kernel modesetting
> > > > > > > > > > (RS400 0x1002:0x5A62 0x1043:0x1402).
> > > > > > > > > > [ 4.837251] [drm] register mmio base: 0xFA8F0000
> > > > > > > > > > [ 4.837302] [drm] register mmio size: 65536
> > > > > > > > > > [ 4.837570] [drm] Generation 2 PCI interface, using
> > > > > > > > > > max accessible memory [ 4.837653] radeon 0000:01:05.0:
> > > > > > > > > > VRAM:
> > > >
> > > > 128M
> > > >
> > > > > > > > 0x0000000078000000
> > > > > > > >
> > > > > > > > > > - 0x000000007FFFFFFF (128M used)
> > > > > > > > > > [ 4.837714] radeon 0000:01:05.0: GTT: 512M
> > > > > > > > > > 0x0000000080000000 - 0x000000009FFFFFFF
> > > > > > > > > > [ 4.837787] [drm] Detected VRAM RAM=128M, BAR=256M
> > > > > > > > > > [ 4.837839] [drm] RAM width 128bits DDR
> > > > > > > > > > [ 4.839854] [TTM] Zone kernel: Available graphics
> > > > > > > > > > memory: 444588 kiB [ 4.839907] [TTM] Zone highmem:
> > > > > > > > > > Available graphics memory: 972784
> > > > > > > >
> > > > > > > > kiB
> > > > > > > >
> > > > > > > > > > [ 4.839959] [TTM] Initializing pool allocator
> > > > > > > > > > [ 4.840042] [drm] radeon: 128M of VRAM memory ready
> > > > > > > > > > [ 4.840094] [drm] radeon: 512M of GTT memory ready.
> > > > > > > > > > [ 4.840160] [drm] GART: num cpu pages 131072, num gpu
> > > > > > > > > > pages 131072 [ 4.866905] [drm] radeon: 2 quad pipes, 1
> > > > > > > > > > z pipes initialized. [ 4.872945] [drm] PCIE GART of
> > > > > > > > > > 512M enabled (table at
> > > > > > > > > > 0x0000000035A00000).
> > > > > > > > > > [ 4.873213] radeon 0000:01:05.0: WB enabled
> > > > > > > > > > [ 4.873301] radeon 0000:01:05.0: fence driver on ring
> > > > > > > > > > 0 use gpu addr 0x0000000080000000 and cpu addr 0xf592c000
> > > > > > > > > > [ 4.874929] [drm] Supports vblank timestamp caching
> > > > > > > > > > Rev 1 (10.10.2010). [ 4.874988] [drm] Driver supports
> > > > > > > > > > precise vblank timestamp query. [ 4.875055] [drm]
> > > > > > > > > > radeon: irq initialized. [ 4.875119] [drm] Loading
> > > > > > > > > > R300 Microcode [ 4.962083] ohci_hcd: USB 1.1 'Open'
> > > > > > > > > > Host Controller (OHCI) Driver [ 5.088150] ohci-pci:
> > > > > > > > > > OHCI PCI platform driver [ 5.141799] [drm] radeon:
> > > > > > > > > > ring at 0x0000000080001000 [ 5.141883] [drm] ring test
> > > > > > > > > > succeeded in 2 usecs
> > > > > > > > > > [ 5.142064] spurious 8259A interrupt: IRQ7.
> > > > > > > > > > [ 5.142073] [drm] ib test succeeded in 0 usecs
> > > > > > > > > > [ 5.142317] [drm] Panel ID String: LPL
> > > > > > > > > > [ 5.142370] [drm] Panel Size 1280x800
> > > > > > > > > > [ 5.166305] [drm] radeon legacy LVDS backlight
> > > > > > > > > > initialized [ 5.166358] [drm] Radeon Display
> > > > > > > > > > Connectors [ 5.166408] [drm] Connector 0:
> > > > > > > > > > [ 5.166458] [drm] VGA-1
> > > > > > > > > > [ 5.166509] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68
> > > > > > > > > > 0x68 0x68 [ 5.166560] [drm] Encoders:
> > > > > > > > > > [ 5.166610] [drm] CRT1: INTERNAL_DAC2
> > > > > > > > > > [ 5.166660] [drm] Connector 1:
> > > > > > > > > > [ 5.166710] [drm] LVDS-1
> > > > > > > > > > [ 5.166760] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0
> > > > > > > > > > 0x1a0 0x1a4 0x1a4 [ 5.166812] [drm] Encoders:
> > > > > > > > > > [ 5.166862] [drm] LCD1: INTERNAL_LVDS
> > > > > > > > > > [ 5.426968] [drm] fb mappable at 0xC0040000
> > > > > > > > > > [ 5.427026] [drm] vram apper at 0xC0000000
> > > > > > > > > > [ 5.427076] [drm] size 4096000
> > > > > > > > > > [ 5.427126] [drm] fb depth is 24
> > > > > > > > > > [ 5.427176] [drm] pitch is 5120
> > > > > > > > > > [ 5.427388] radeon 0000:01:05.0: fb0: radeondrmfb
> > > > > > > > > > frame buffer device [ 5.427442] radeon 0000:01:05.0:
> > > > > > > > > > registered panic notifier [ 5.427501] [drm]
> > > > > > > > > > Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on
> > > > > > > > > > minor 0
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Ondrej Zary
> > > > > > > >
> > > > > > > > --
> > > > > > > > Ondrej Zary
> > > >
> > > > --
> > > > Ondrej Zary
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > > in the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/

--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Joe Perches: "Re: [PATCH RESEND V3 net-next 2/3] net: huawei_cdc_ncm: Introducethe huawei_cdc_ncm driver"
Previous message: Christoph Lameter: "[guv v2 31/31] Remove __get_cpu_var and __raw_get_cpu_var macros"
In reply to: Ondrej Zary: "Re: Asus F5RL laptop unable to resume from S3 because of radeon module"
Next in thread: Deucher, Alexander: "RE: Asus F5RL laptop unable to resume from S3 because of radeonmodule"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]