Re: [PATCH v2 3/3] gpio: pcf857x: Add OF support

[Mark Rutland]

On Tue, Aug 27, 2013 at 11:50:40AM +0100, Laurent Pinchart wrote:
> Hi Mark,
> 
> On Tuesday 27 August 2013 11:39:49 Mark Rutland wrote:
> > On Sat, Aug 24, 2013 at 03:13:11PM +0100, Tomasz Figa wrote:
> > > On Saturday 24 of August 2013 02:54:07 Laurent Pinchart wrote:
> > > > On Saturday 24 August 2013 02:41:59 Tomasz Figa wrote:
> > > > > On Tuesday 20 of August 2013 01:04:54 Laurent Pinchart wrote:
> > > > > > Add DT bindings for the pcf857x-compatible chips and parse the
> > > > > > device tree node in the driver.
> > > > > > 
> > > > > > Signed-off-by: Laurent Pinchart
> > > > > > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > > > > ---
> > > > > > 
> > > > > >  .../devicetree/bindings/gpio/gpio-pcf857x.txt      | 71 +++++++++++
> > > > > >  drivers/gpio/gpio-pcf857x.c                        | 57 +++++++++--
> > > > > >  2 files changed, 119 insertions(+), 9 deletions(-)
> > > > > >  create mode 100644
> > > > > > Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
> > > > > > b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt new file
> > > > > > mode 100644
> > > > > > index 0000000..df94462
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
> > > > > > @@ -0,0 +1,71 @@
> > > > 
> > > > [snip]
> > > > 
> > > > > > +  - pins-initial-state: Bitmask that specifies the initial state of
> > > > > > +    each pin. When a bit is set to zero, the corresponding pin will
> > > > > > be
> > > > > > +    initialized to the input (pulled-up) state. When the  bit is
> > > > > > set to +    one, the pin will be initialized the the low-level
> > > > > > output state. If +    the property is not specified all pins will
> > > > > > be initialized to the +    input state.
> > > > > 
> > > > > Hmm, do you actually need to know whether those pins are outputs or
> > > > > inputs before they get used for first time? I believe any driver
> > > > > using GPIO will call gpio_direction_{in,out}put() before it starts
> > > > > using the pin, which will initialize the pin to a known state.
> > > > > 
> > > > > What I'd suggest is making the driver handle this by having a bit mask
> > > > > that marks states of pins as defined and flagging all pins as
> > > > > undefined by default. Then any call to gpio_direction_output() or
> > > > > _input() would mark it as defined and direction of the pin could be
> > > > > stored in internal driver structures.
> > > > 
> > > > The problem is that all pins are controlled through a single I2C write.
> > > > Setting the direction of a pin will set the direction of all other pins.
> > > > I thus need to know what the initial settings are to avoid glitches.
> > 
> > I guess it's not possible to read the initial state from the hardware?
> 
> I wish. Unfortunately it can only be written.

What a shame :(

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/