Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver

[Felipe Balbi]

On Wed, Aug 14, 2013 at 12:28:17PM +0300, Ivan T. Ivanov wrote:
> 
> Hi, 
> 
> On Mon, 2013-08-12 at 13:24 -0500, Felipe Balbi wrote: 
> > On Fri, Aug 09, 2013 at 07:09:18PM +0300, Ivan T. Ivanov wrote:
> > > Hi, 
> > > 
> > > On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
> > > > Hi,
> > > > 
> > > > On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote:
> > > > > diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> > > > > new file mode 100644
> > > > > index 0000000..e509abc
> > > > > --- /dev/null
> > > > > +++ b/drivers/usb/dwc3/dwc3-msm.c
> > > > > @@ -0,0 +1,175 @@
> > > > > +#undef CONFIG_REGULATOR
> > > > 
> > > > why ??????
> > > > 
> > > 
> > > 1. This shows that driver is still not fully tested 
> > >    Regulators support is still missing in the MSM
> > > 2. Helps me to load driver successfully. 
> > 
> > Then remove all the regulator-related code from this.
> 
> I would like to keep them. I will just remove #undef line. 
> Code will continue to build fine. And once regulators drivers 
> are upstreamed this driver 'will not' require further
> modifications.

fair enough.

-- 
balbi

Attachment: signature.asc
Description: Digital signature