Re: [PATCH 1/2] serial: fsl-imx-uart: Cleanup duplicate devicetree binding

[Mark Rutland]

On Wed, Aug 28, 2013 at 08:08:22PM +0100, Kumar Gala wrote:
> We had two bindings for the same serial device, it looks like the one in
> tty/serial/fsl-imx-uart.txt is the more up to date one so go with it and
> merge a few things about the use/need for aliases in from
> serial/fsl-imx-uart.txt.

Oh my, that's a mess.

> 
> Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/serial/fsl-imx-uart.txt    | 35 ----------------------
>  .../bindings/tty/serial/fsl-imx-uart.txt           |  9 +++++-
>  2 files changed, 8 insertions(+), 36 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
> deleted file mode 100644
> index c58573b..0000000
> --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -* Freescale i.MX UART controller
> -
> -Required properties:
> -- compatible : should be "fsl,imx21-uart"
> -- reg : Address and length of the register set for the device
> -- interrupts : Should contain UART interrupt number
> -
> -Optional properties:
> -- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used
> -
> -Note: Each uart controller should have an alias correctly numbered
> -in "aliases" node.
> -
> -Example:
> -
> -- From imx51.dtsi:
> -aliases {
> -	serial0 = &uart1;
> -	serial1 = &uart2;
> -	serial2 = &uart3;
> -};
> -
> -uart1: serial@73fbc000 {
> -	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
> -	reg = <0x73fbc000 0x4000>;
> -	interrupts = <31>;
> -	status = "disabled";
> -}
> -
> -- From imx51-babbage.dts:
> -uart1: serial@73fbc000 {
> -	fsl,uart-has-rtscts;
> -	status = "okay";
> -};
> -
> diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> index c662eb3..35ae1fb 100644
> --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> @@ -11,9 +11,16 @@ Optional properties:

I note this binding doesn't actually define the set of compatible
strings, as it has:

	Compatible : Should be "fsl,<soc>-uart"

... the other binding had:

	compatible : should be "fsl,imx21-uart"

.. and the driver accepts "fsl,imx21-uart" and "fsl,imx1-uart".

Would it be possible to clarify this at the same time, something like:

	Compatible : Should contain one of:
		     * "fsl,imx21-uart" for UARTs compatible with that in
		       i.MX21 SoCs.
		     * "fsl,imx1-uart" for UARTs compatible with that in
		       i.MX1x SoCsÂ.

Otherwise, this seems sensible. With something like the above:

Acked-by: Mark Rutland <mark.rutland@xxxxxxx>

Cheers,
Mark.

>  - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
>                    is DCE mode by default.
>  
> +Note: Each uart controller should have an alias correctly numbered
> +in "aliases" node.
> +
>  Example:
>  
> -serial@73fbc000 {
> +aliases {
> +	serial0 = &uart1;
> +};
> +
> +uart1: serial@73fbc000 {
>  	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
>  	reg = <0x73fbc000 0x4000>;
>  	interrupts = <31>;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/