[ 09/36] SCSI: pm80xx: fix Adaptec 71605H hang

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil@xxxxxxxxx>

commit 9504a923924d663e1953f872f0a828e6454a6cfc upstream.

The IO command size is 128 bytes for these new controllers as opposed to 64
for the old 8001 controller.

The Adaptec out-of-tree driver did this correctly. After comparing the two
this turned out to be the crucial difference.

So don't hardcode the IO command size, instead use pm8001_ha->iomb_size as
that is the correct value for both old and new controllers.

Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Acked-by: Anand Kumar Santhanam <AnandKumar.Santhanam@xxxxxxxx>
Acked-by: Jack Wang <xjtuwjp@xxxxxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/pm8001/pm8001_hwi.c |    4 ++--
 drivers/scsi/pm8001/pm80xx_hwi.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -221,7 +221,7 @@ static void init_default_table_values(st
 	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt		= 0x01;
 	for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
 		pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt	=
-			PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30);
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
 		pm8001_ha->inbnd_q_tbl[i].upper_base_addr	=
 			pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
 		pm8001_ha->inbnd_q_tbl[i].lower_base_addr	=
@@ -247,7 +247,7 @@ static void init_default_table_values(st
 	}
 	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
 		pm8001_ha->outbnd_q_tbl[i].element_size_cnt	=
-			PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30);
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
 		pm8001_ha->outbnd_q_tbl[i].upper_base_addr	=
 			pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
 		pm8001_ha->outbnd_q_tbl[i].lower_base_addr	=
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -275,7 +275,7 @@ static void init_default_table_values(st
 
 	for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
 		pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt	=
-			PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30);
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
 		pm8001_ha->inbnd_q_tbl[i].upper_base_addr	=
 			pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
 		pm8001_ha->inbnd_q_tbl[i].lower_base_addr	=
@@ -301,7 +301,7 @@ static void init_default_table_values(st
 	}
 	for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
 		pm8001_ha->outbnd_q_tbl[i].element_size_cnt	=
-			PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30);
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
 		pm8001_ha->outbnd_q_tbl[i].upper_base_addr	=
 			pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
 		pm8001_ha->outbnd_q_tbl[i].lower_base_addr	=


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/