Re: [PATCH V3] pci: exynos: split into two parts such as Synopsyspart and Exynos part

[Kishon Vijay Abraham I]

On Thursday 12 September 2013 04:16 PM, Pratyush Anand wrote:
> On Thu, Sep 12, 2013 at 03:48:03PM +0530, Pratyush Anand wrote:
>> On Thu, Sep 12, 2013 at 06:07:23PM +0800, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On Thursday 12 September 2013 03:22 PM, Pratyush Anand wrote:
>>>> Hi Kishon,
>>>>
>>>> On Thu, Sep 12, 2013 at 05:43:40PM +0800, Kishon Vijay Abraham I wrote:
>>>>> Hi,
>>>>>
>>>>> On Thursday 12 September 2013 03:00 PM, Pratyush Anand wrote:
>>>>>> Hi Jingoo,
>>>>>>
>>>>>>
>>>>>> On Thu, Sep 12, 2013 at 03:15:04PM +0800, Jingoo Han wrote:
>>>>>>> On Tuesday 23 July 2013 12:30 PM, Kishon Vijay Abraham I wrote:
>>>>>>>>>> .
>>>>>>>>>> .
>>
>> [...]
>>
>>>>> when I do ifconfig eth0 up, I get *r8169 0000:01:00.0 eth0: link up.*
>>>>> But I dont receive any packets and ping also fails and the tx and rx packet
>>>>> count is also 0. Could it be related to inbound translation?
>>>>
>>>> A PCIe analyser log would tell a definite cause. Most likely either
>>>> inbound translation is not working or INTx/MSI is not working.
>>>
>>> I have enabled only legacy interrupts. Whenever I connect or disconnect
>>> ethernet cable I get link up/link down message and also the interrupt count for
>>> eth0 increases. So I'm not doubting INTx interrupts as such.
> 
> Just a question, what is the MRRS of your RC? if it is 128, can you

it's 512.
> try with passing pci=pcie_bus_peer2peer  in your bootargs.
> 
> Again, analyser will help a lot in diagnosing such issues.

dont have a analyser here :-(

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/