[PATCH] drivers: power: Add support for bq24735 charger
From: Rhyland Klein
Date: Tue Sep 17 2013 - 17:11:14 EST
From: Darbha Sriharsha <dsriharsha@xxxxxxxxxx>
Adding driver support for bq24735 charger chipset.
Signed-off-by: Darbha Sriharsha <dsriharsha@xxxxxxxxxx>
Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
---
.../bindings/power_supply/ti,bq24735.txt | 56 +++
drivers/power/Kconfig | 8 +
drivers/power/Makefile | 1 +
drivers/power/bq24735-charger.c | 382 ++++++++++++++++++++
include/linux/power/bq24735-charger.h | 68 ++++
5 files changed, 515 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
create mode 100644 drivers/power/bq24735-charger.c
create mode 100644 include/linux/power/bq24735-charger.h
diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
new file mode 100644
index 0000000..19ea5a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
@@ -0,0 +1,56 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - ti,ac-detect: This gpio is optionally used to read the ac adapter
+ presence.
+ - ti,charge-current : Used to control and set the charging current. This value
+ must follow the below guidelines:
+ bit 0 - 5: Not used
+ bit 6: 1 = Adds 64mA of charger current
+ bit 7: 1 = Adds 128mA of charger current
+ bit 8: 1 = Adds 256mA of charger current
+ bit 9: 1 = Adds 512mA of charger current
+ bit 10: 1 = Adds 1024mA of charger current
+ bit 11: 1 = Adds 2048mA of charger current
+ bit 12: 1 = Adds 4096mA of charger current
+ bit 13 - 15: Not used
+ Setting the value to < 128mA or > 8.128A terminates charging.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+ must follow the below guidelines:
+ bit 0 - 3: Not used
+ bit 4: 1 = Adds 16mV of charger voltage
+ bit 5: 1 = Adds 32mV of charger voltage
+ bit 6: 1 = Adds 64mV of charger voltage
+ bit 7: 1 = Adds 128mV of charger voltage
+ bit 8: 1 = Adds 256mV of charger voltage
+ bit 9: 1 = Adds 512mV of charger voltage
+ bit 10: 1 = Adds 1024mV of charger voltage
+ bit 11: 1 = Adds 2048mV of charger voltage
+ bit 12: 1 = Adds 4096mV of charger voltage
+ bit 13: 1 = Adds 8192mV of charger voltage
+ bit 14: 1 = Adds 16384mV of charger voltage
+ bit 15: Not used
+ Setting the value to < 1.024V or > 19.2V terminates charging.
+ - ti,input-current: Used to control and set the charger input current. This
+ value must follow the below guidelines:
+ bit 0 - 6: Not used
+ bit 7: 1 = Adds 128mA of input current
+ bit 8: 1 = Adds 256mA of input current
+ bit 9: 1 = Adds 512mA of input current
+ bit 10: 1 = Adds 1024mA of input current
+ bit 11: 1 = Adds 2048mA of input current
+ bit 12: 1 = Adds 4086mA of input current
+ bit 13 - 15: Not used
+ Setting the value to < 128mA or > 8.064A terminates charging.
+
+Example:
+
+ bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = < 0x9 >;
+ ti,ac-detect = <&gpio 72 0x1>;
+ }
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index e8970a6..380968d 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -340,6 +340,14 @@ config CHARGER_BQ24190
help
Say Y to enable support for the TI BQ24190 battery charger.
+config CHARGER_BQ24735
+ tristate "BQ24735 battery charger support"
+ depends on I2C && GPIOLIB
+ help
+ bq24735 is the battery charger chipset.
+ Say Y here to enable battery charging driver support for
+ bq24735
+
config CHARGER_SMB347
tristate "Summit Microelectronics SMB347 Battery Charger"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4ae4533..e65487b 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
diff --git a/drivers/power/bq24735-charger.c b/drivers/power/bq24735-charger.c
new file mode 100644
index 0000000..51ce980
--- /dev/null
+++ b/drivers/power/bq24735-charger.c
@@ -0,0 +1,382 @@
+/*
+ * drivers/power/bq24735-charger.c
+ *
+ * Battery charger driver for bq24735 from TI
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include <linux/power/bq24735-charger.h>
+
+struct bq24735_charger {
+ struct power_supply charger;
+ struct device *dev;
+ struct i2c_client *client;
+ struct bq24735_platform *pdata;
+ int irq;
+};
+
+static enum power_supply_property bq24735_charger_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int bq24735_write_word(struct i2c_client *client, int reg, u16 value)
+{
+ s32 ret;
+
+ ret = i2c_smbus_write_word_data(client, reg, le16_to_cpu(value));
+ if (ret < 0)
+ dev_err(&client->dev, "Failed in writing to 0x%x\n", reg);
+ return ret;
+}
+
+static int bq24735_read_word(struct i2c_client *client, int reg)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed in reading from 0x%x\n", reg);
+ return ret;
+ }
+
+ return le16_to_cpu(ret);
+}
+
+static int bq24735_update_word(struct i2c_client *client, int reg,
+ u16 mask, u16 value)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = bq24735_read_word(client, reg);
+ if (ret < 0)
+ return ret;
+
+ tmp = ret & ~mask;
+ tmp |= value & mask;
+
+ ret = bq24735_write_word(client, reg, tmp);
+
+ return ret;
+}
+
+static int bq24735_config_charger(struct bq24735_charger *charger)
+{
+ int ret = 0;
+ u16 value = 0;
+ struct bq24735_platform *pdata = charger->pdata;
+
+ if (pdata->charge_current) {
+ value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_CURRENT_REG, value);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (pdata->charge_voltage) {
+ value = pdata->charge_voltage & BQ24735_CHARGE_VOLTAGE_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_VOLTAGE_REG, value);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (pdata->input_current) {
+ value = pdata->input_current & BQ24735_INPUT_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_INPUT_CURRENT_REG, value);
+ if (ret < 0)
+ return ret;
+ }
+ return ret;
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+ struct power_supply *charger = devid;
+
+ power_supply_changed(charger);
+
+ return IRQ_HANDLED;
+}
+
+static int bq24735_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct bq24735_charger *bq24735_charger;
+ struct bq24735_platform *pdata;
+
+ bq24735_charger = container_of(psy, struct bq24735_charger, charger);
+ pdata = bq24735_charger->pdata;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (pdata->status_gpio) {
+ val->intval = gpio_get_value_cansleep(
+ pdata->status_gpio);
+ val->intval ^= pdata->gpio_active_low;
+ } else {
+ int ac = 0;
+
+ ac = bq24735_read_word(bq24735_charger->client,
+ BQ24735_CHG_OPT_REG);
+ val->intval = (ac & BQ24735_CHG_OPT_AC_PRESENT) ? 1 : 0;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bq24735_enable_charging(struct bq24735_charger *charger)
+{
+ int ret = 0;
+
+ ret = bq24735_update_word(charger->client, BQ24735_CHG_OPT_REG,
+ BQ24735_CHG_OPT_CHARGE_ENABLE,
+ BQ24735_ENABLE_CHARGING);
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static struct bq24735_platform *bq24735_parse_dt_data(
+ struct i2c_client *client)
+{
+ struct bq24735_platform *pdata;
+ struct device_node *np = client->dev.of_node;
+ u32 val;
+ int ret;
+ enum of_gpio_flags flags;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&client->dev,
+ "Memory alloc for bq24735 pdata failed\n");
+ return NULL;
+ }
+
+ pdata->status_gpio = of_get_named_gpio_flags(np, "ti,ac-detect",
+ 0, &flags);
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ pdata->gpio_active_low = 1;
+
+ ret = of_property_read_u32(np, "ti,charge-current", &val);
+ if (!ret)
+ pdata->charge_current = val;
+
+ ret = of_property_read_u32(np, "ti,charge-voltage", &val);
+ if (!ret)
+ pdata->charge_voltage = val;
+
+ ret = of_property_read_u32(np, "ti,input-current", &val);
+ if (!ret)
+ pdata->input_current = val;
+
+ return pdata;
+}
+#else
+static inline struct bq24735_platform *bq24735_parse_dt_data(
+ struct i2c_client *client)
+{
+ return NULL;
+}
+#endif
+
+static int bq24735_charger_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct bq24735_charger *charger_device;
+ struct power_supply *charger;
+ char *name;
+
+ charger_device = devm_kzalloc(&client->dev, sizeof(*charger_device),
+ GFP_KERNEL);
+ if (!charger_device) {
+ dev_err(&client->dev, "failed to allocate memory status\n");
+ return -ENOMEM;
+ }
+
+ charger_device->pdata = client->dev.platform_data;
+
+ if (!charger_device->pdata && client->dev.of_node)
+ charger_device->pdata = bq24735_parse_dt_data(client);
+
+ if (!charger_device->pdata) {
+ dev_err(&client->dev, "no platform data provided\n");
+ return -EINVAL;
+ }
+
+ name = charger_device->pdata->name;
+ if (!name) {
+ name = kasprintf(GFP_KERNEL, "bq24735-%s",
+ dev_name(&client->dev));
+ if (!name) {
+ dev_err(&client->dev, "Failed to alloc device name\n");
+ return -ENOMEM;
+ }
+ }
+
+ charger_device->dev = &client->dev;
+ charger_device->client = client;
+
+ charger = &charger_device->charger;
+
+ charger->name = name;
+ charger->type = POWER_SUPPLY_TYPE_MAINS;
+ charger->properties = bq24735_charger_properties;
+ charger->num_properties = ARRAY_SIZE(bq24735_charger_properties);
+ charger->get_property = bq24735_charger_get_property;
+ charger->supplied_to = charger_device->pdata->supplied_to;
+ charger->num_supplicants = charger_device->pdata->num_supplicants;
+ charger->of_node = client->dev.of_node;
+
+ i2c_set_clientdata(client, charger_device);
+
+ ret = bq24735_read_word(charger_device->client,
+ BQ24735_MANUFACTURER_ID_REG);
+ if (ret != BQ24735_MANUFACTURER_ID) {
+ dev_err(charger_device->dev,
+ "manufacturer id mismatch..exiting driver..\n");
+ ret = -ENODEV;
+ goto err_free_name;
+ }
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, bq24735_charger_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ charger->name, charger);
+ if (ret) {
+ dev_err(&client->dev,
+ "Unable to register irq %d err %d\n",
+ client->irq, ret);
+ goto err_free_name;
+ }
+ charger_device->irq = client->irq;
+ }
+
+ if (charger_device->pdata->status_gpio) {
+ if (!gpio_is_valid(charger_device->pdata->status_gpio)) {
+ dev_err(&client->dev, "Invalid gpio pin\n");
+ ret = -EINVAL;
+ goto err_free_name;
+ }
+
+ ret = gpio_request(charger_device->pdata->status_gpio, name);
+ if (ret) {
+ dev_err(&client->dev, "Failed gpio request: %d\n", ret);
+ goto err_free_name;
+ }
+ }
+
+ ret = bq24735_config_charger(charger_device);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed in configuring charger");
+ goto err_free_name;
+ }
+
+ /* check for AC adapter presence */
+ ret = bq24735_read_word(charger_device->client, BQ24735_CHG_OPT_REG);
+ if (ret < 0)
+ goto err_free_name;
+ else if (ret & BQ24735_CHG_OPT_AC_PRESENT) {
+ /* enable charging */
+ ret = bq24735_enable_charging(charger_device);
+ if (ret < 0)
+ goto err_free_name;
+ }
+
+ ret = power_supply_register(&client->dev, charger);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register power supply: %d\n",
+ ret);
+ goto err_free_name;
+ }
+
+ return 0;
+
+err_free_name:
+ if (name && name != charger_device->pdata->name)
+ kfree(name);
+
+ return ret;
+}
+
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+ struct bq24735_charger *charger_device = i2c_get_clientdata(client);
+
+ if (charger_device->irq)
+ devm_free_irq(charger_device->dev, charger_device->irq,
+ &charger_device->charger);
+
+ power_supply_unregister(&charger_device->charger);
+
+ if (charger_device->charger.name != charger_device->pdata->name)
+ kfree(charger_device->charger.name);
+
+ return 0;
+}
+
+static const struct i2c_device_id bq24735_charger_id[] = {
+ { "bq24735-charger", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, bq24735_charger_id);
+
+static const struct of_device_id bq24735_match_ids[] = {
+ { .compatible = "ti,bq24735", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, bq24735_match_ids);
+
+static struct i2c_driver bq24735_charger_driver = {
+ .driver = {
+ .name = "bq24735-charger",
+ .owner = THIS_MODULE,
+ .of_match_table = bq24735_match_ids,
+ },
+ .probe = bq24735_charger_probe,
+ .remove = bq24735_charger_remove,
+ .id_table = bq24735_charger_id,
+};
+
+module_i2c_driver(bq24735_charger_driver);
+
+MODULE_DESCRIPTION("bq24735 battery charging driver");
+MODULE_AUTHOR("Darbha Sriharsha <dsriharsha@xxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/power/bq24735-charger.h b/include/linux/power/bq24735-charger.h
new file mode 100644
index 0000000..9663c57
--- /dev/null
+++ b/include/linux/power/bq24735-charger.h
@@ -0,0 +1,68 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CHARGER_BQ24735_H_
+#define __CHARGER_BQ24735_H_
+
+#include <linux/types.h>
+#include <linux/power_supply.h>
+
+#define BQ24735_CHG_OPT_REG 0x12
+#define BQ24735_CHG_OPT_CHARGE_ENABLE (1 << 0)
+#define BQ24735_ENABLE_CHARGING 0
+#define BQ24735_DISABLE_CHARGING 1
+#define BQ24735_CHG_OPT_ACOC_THRESHOLD (1 << 1)
+#define BQ24735_CHG_OPT_BOOST_MODE (1 << 2)
+#define BQ24735_CHG_OPT_BOOST_ENABLE (1 << 3)
+#define BQ24735_CHG_OPT_AC_PRESENT (1 << 4)
+#define BQ24735_CHG_OPT_IOUT_SELECTION (1 << 5)
+#define BQ24735_CHG_OPT_LEARN_ENABLE (1 << 6)
+#define BQ24735_CHG_OPT_IFAULT_LOW (1 << 7)
+#define BQ24735_CHG_OPT_IFAULT_HIGH (1 << 8)
+#define BQ24735_CHG_OPT_EMI_SW_FREQ_EN (1 << 9)
+#define BQ24735_CHG_OPT_EMI_SW_FREQ_ADJ (1 << 10)
+#define BQ24735_CHG_OPT_BAT_DEPLETION (3 << 11)
+#define BQ24735_CHG_OPT_WATCHDOG_TIMER (3 << 13)
+#define BQ24735_CHG_OPT_ACOK_DEGLITCH (1 << 15)
+#define BQ24735_CHARGE_CURRENT_REG 0x14
+#define BQ24735_CHARGE_CURRENT_MASK 0x1fc0
+#define BQ24735_CHARGE_VOLTAGE_REG 0x15
+#define BQ24735_CHARGE_VOLTAGE_MASK 0x7ff0
+#define BQ24735_INPUT_CURRENT_REG 0x3f
+#define BQ24735_INPUT_CURRENT_MASK 0x1f80
+#define BQ24735_MANUFACTURER_ID_REG 0xfe
+#define BQ24735_DEVICE_ID_REG 0xff
+
+#define BQ24735_MANUFACTURER_ID 0x0040
+#define BQ24735_DEVICE_ID 0x000B
+
+
+struct bq24735_platform {
+ uint32_t charge_current;
+ uint32_t charge_voltage;
+ uint32_t input_current;
+
+ const char *name;
+
+ int status_gpio;
+ int gpio_active_low;
+
+ char **supplied_to;
+ size_t num_supplicants;
+};
+
+#endif /* __CHARGER_BQ24735_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/