Re: [PATCH 17/20] iio: pressure-core: st: Provide support for theVdd_IO power supply

[Jonathan Cameron]

On 09/16/13 17:02, Lee Jones wrote:
> The power to some of the sensors are controlled by regulators. In most
> cases these are 'always on', but if not they will fail to work until
> the regulator is enabled using the relevant APIs. This patch allows for
> the Vdd_IO power supply to be specified by either platform data or
> Device Tree.
> 
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks - just the DT patches to go once that discussion is cleanly finished.
> ---
>  drivers/iio/pressure/st_pressure_core.c | 13 ++++++++++++-
>  include/linux/iio/common/st_sensors.h   |  2 ++
>  2 files changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index c801c80..e3f3888 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -319,7 +319,7 @@ void st_press_power_enable(struct iio_dev *indio_dev)
>  	struct st_sensor_data *pdata = iio_priv(indio_dev);
>  	int err;
>  
> -	/* Regulators not mandatory, but if requested we should enable it. */
> +	/* Regulators not mandatory, but if requested we should enable them. */
>  	pdata->vdd = devm_regulator_get_optional(&indio_dev->dev, "vdd");
>  	if (!IS_ERR(pdata->vdd)) {
>  		err = regulator_enable(pdata->vdd);
> @@ -327,6 +327,14 @@ void st_press_power_enable(struct iio_dev *indio_dev)
>  			dev_warn(&indio_dev->dev,
>  				 "Failed to enable specified Vdd supply\n");
>  	}
> +
> +	pdata->vdd_io = devm_regulator_get_optional(&indio_dev->dev, "vddio");
> +	if (!IS_ERR(pdata->vdd_io)) {
> +		err = regulator_enable(pdata->vdd_io);
> +		if (err != 0)
> +			dev_warn(&indio_dev->dev,
> +				 "Failed to enable specified Vdd_IO supply\n");
> +	}
>  }
>  
>  void st_press_power_disable(struct iio_dev *indio_dev)
> @@ -335,6 +343,9 @@ void st_press_power_disable(struct iio_dev *indio_dev)
>  
>  	if (!IS_ERR(pdata->vdd))
>  		regulator_disable(pdata->vdd);
> +
> +	if (!IS_ERR(pdata->vdd_io))
> +		regulator_disable(pdata->vdd_io);
>  }
>  
>  int st_press_common_probe(struct iio_dev *indio_dev,
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index 968b84e..3c005eb 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -203,6 +203,7 @@ struct st_sensors {
>   * @sensor: Pointer to the current sensor struct in use.
>   * @current_fullscale: Maximum range of measure by the sensor.
>   * @vdd: Pointer to sensor's Vdd power supply
> + * @vdd_io: Pointer to sensor's Vdd-IO power supply
>   * @enabled: Status of the sensor (false->off, true->on).
>   * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
>   * @buffer_data: Data used by buffer part.
> @@ -219,6 +220,7 @@ struct st_sensor_data {
>  	struct st_sensors *sensor;
>  	struct st_sensor_fullscale_avl *current_fullscale;
>  	struct regulator *vdd;
> +	struct regulator *vdd_io;
>  
>  	bool enabled;
>  	bool multiread_bit;
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/