[x86] BUG: unable to handle kernel NULL pointer dereference at (null)

From: Fengguang Wu
Date: Tue Oct 08 2013 - 13:15:47 EST

Next message: Eric Dumazet: "Re: [PATCH] core: Catch overflows in do_div() function"
Previous message: Bhushan Bharat-R65777: "RE: [PATCH 1/7] powerpc: Add interface to get msi region information"
In reply to: Linus Torvalds: "Re: [x86] BUG: unable to handle kernel paging request at 00740060"
Next in thread: Linus Torvalds: "Re: [x86] BUG: unable to handle kernel NULL pointer dereference at (null)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi all,

I managed to find and bisect down some more different call traces to
the same commit 0c44c2d0f ("x86: Use asm goto to implement better
modify_and_test() functions"). Hope this helps.

The below dmesg chunks represent 25 bad kernel boots. This is an very
reproducible bug: this kernel has no good boots at all.

The kernel is compiled from 0c44c2d0f with kconfig
i386-randconfig-r8-1005 (attached). Also attached one full dmesg and
the bisect log.

dmesg-quantal-ant-2:20131009002432:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 27.865422] ------------[ cut here ]------------
[ 27.865982] Kernel BUG at c10563af [verbose debug info unavailable]
[ 27.866625] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 27.867363] Modules linked in:
[ 27.867363] CPU: 0 PID: 40 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 27.867363] task: c6c33420 ti: c6d44000 task.ti: c6d44000
[ 27.867363] EIP: 0060:[<c10563af>] EFLAGS: 00000202 CPU: 0
[ 27.867363] EIP is at __put_cred+0x2f/0x90
[ 27.867363] EAX: c14bb720 EBX: c6d28380 ECX: 00000000 EDX: 00000001
[ 27.867363] ESI: c6c33420 EDI: 00000001 EBP: c6d45f24 ESP: c6d45f18
[ 27.867363] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 27.867363] CR0: 8005003b CR2: b768d000 CR3: 06d57000 CR4: 000006b0
[ 27.867363] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 27.867363] DR6: 00000000 DR7: 00000000
[ 27.867363] Stack:
[ 27.867363] c6d27000 c6c336b8 c6c33420 c6d45f30 c110a408 c6d27f00 c6d45f44 c104d499
[ 27.867363] c6c336d0 c6d1c480 c6c33420 c6d45f8c c1031202 c6d44000 c6c33420 c1075fab
[ 27.867363] c6d45f78 00000001 00000100 00000000 00000046 00000030 c6d1c4d0 c6c33420
[ 27.867363] Call Trace:
[ 27.867363] [<c110a408>] file_free_rcu+0x28/0x40
[ 27.867363] [<c104d499>] task_work_run+0x79/0xa0
[ 27.867363] [<c1031202>] do_exit+0x2f2/0x950
[ 27.867363] [<c1075fab>] ? trace_hardirqs_off+0xb/0x10
[ 27.867363] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 27.867363] [<c1032858>] SyS_exit_group+0x18/0x20
[ 27.867363] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 27.867363] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 27.867363] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d45f18
[ 27.891948] ---[ end trace f04df4e1fba40cb1 ]---
[ 27.892595] Fixing recursive fault but reboot is needed!

dmesg-quantal-ant-9:20131009002506:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 27.856676] debug: unmapping init [mem 0xc14d7000-0xc151bfff]
[ 28.193490] ------------[ cut here ]------------
[ 28.194993] WARNING: CPU: 0 PID: 39 at lib/list_debug.c:36 __list_add+0x141/0x180()
[ 28.195809] list_add double add: new=c6d1e368, prev=c6d58324, next=c6d1e368.
[ 28.196480] Modules linked in:
[ 28.197809] CPU: 0 PID: 39 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 28.199056] c141a43f c6d43d10 c1301315 c6d43d40 c10304aa c141af68 c6d43d6c 00000027
[ 28.201674] c141a43f 00000024 c11a08c1 c11a08c1 c6d58324 c6d1e368 c6d1e368 c6d43d58
[ 28.203312] c1030503 00000009 c6d43d50 c141af68 c6d43d6c c6d43d8c c11a08c1 c141a43f
[ 28.205715] Call Trace:
[ 28.206656] [<c1301315>] dump_stack+0x16/0x18
[ 28.208033] [<c10304aa>] warn_slowpath_common+0x7a/0xa0
[ 28.208966] [<c11a08c1>] ? __list_add+0x141/0x180
[ 28.209759] [<c11a08c1>] ? __list_add+0x141/0x180
[ 28.211208] [<c1030503>] warn_slowpath_fmt+0x33/0x40
[ 28.212113] [<c11a08c1>] __list_add+0x141/0x180
[ 28.212949] [<c11fd745>] tty_add_file+0x35/0x50
[ 28.213881] [<c11ff526>] tty_open+0x1b6/0x7f0
[ 28.215102] [<c110cfae>] chrdev_open+0x6e/0x170
[ 28.215897] [<c110cf40>] ? exact_lock+0x20/0x20
[ 28.216694] [<c1106f31>] do_dentry_open+0x2d1/0x370
[ 28.218077] [<c110cf40>] ? exact_lock+0x20/0x20
[ 28.218911] [<c1107019>] finish_open+0x49/0x60
[ 28.219690] [<c1119308>] do_last.isra.27+0xa88/0x10b0
[ 28.221002] [<c1114d92>] ? link_path_walk+0x122/0x1010
[ 28.221890] [<c1114a0d>] ? path_init+0x34d/0x5b0
[ 28.222714] [<c1119b8c>] path_openat+0x25c/0x770
[ 28.223522] [<c111a774>] do_filp_open+0x34/0xb0
[ 28.224851] [<c110847d>] do_sys_open+0x19d/0x250
[ 28.225661] [<c1307a7e>] ? restore_all+0xf/0xf
[ 28.226408] [<c1108552>] SyS_open+0x22/0x30
[ 28.227668] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 28.228719] ---[ end trace 080224f174f53ed2 ]---
[ 52.287137] BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:39]

dmesg-quantal-athens-19:20131009003413:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.490835] ------------[ cut here ]------------
[ 1.491578] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.492534] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.493063] Modules linked in:
[ 1.493063] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.493063] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.493063] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.493063] EIP is at __put_cred+0x2f/0x90
[ 1.493063] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.493063] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.493063] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.493063] CR0: 8005003b CR2: b7756000 CR3: 06d1e000 CR4: 000006b0
[ 1.493063] Stack:
[ 1.493063] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.493063] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.493063] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.493063] Call Trace:
[ 1.493063] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.493063] [<c104d499>] task_work_run+0x79/0xa0
[ 1.493063] [<c1031202>] do_exit+0x2f2/0x950
[ 1.493063] [<c110a636>] ? __fput+0x216/0x380
[ 1.493063] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.493063] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.493063] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.493063] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.493063] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.511493] ---[ end trace d0b4907160520dd2 ]---
[ 1.512226] Fixing recursive fault but reboot is needed!

dmesg-quantal-cairo-12:20131009003424:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.666630] ------------[ cut here ]------------
[ 1.667251] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.668098] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.668885] Modules linked in:
[ 1.669147] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.669147] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.669147] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.669147] EIP is at __put_cred+0x2f/0x90
[ 1.669147] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.669147] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.669147] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.669147] CR0: 8005003b CR2: b773d000 CR3: 06d1e000 CR4: 000006b0
[ 1.669147] Stack:
[ 1.669147] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.669147] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.669147] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.669147] Call Trace:
[ 1.669147] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.669147] [<c104d499>] task_work_run+0x79/0xa0
[ 1.669147] [<c1031202>] do_exit+0x2f2/0x950
[ 1.669147] [<c110a636>] ? __fput+0x216/0x380
[ 1.669147] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.669147] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.669147] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.669147] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.669147] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.687323] ---[ end trace 0d9dbb73e2934b28 ]---
[ 1.687769] Fixing recursive fault but reboot is needed!

dmesg-quantal-cairo-23:20131009003413:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.660398] ------------[ cut here ]------------
[ 1.661181] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.662218] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.663116] Modules linked in:
[ 1.663358] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.663358] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.663358] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.663358] EIP is at __put_cred+0x2f/0x90
[ 1.663358] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.663358] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.663358] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.663358] CR0: 8005003b CR2: b76ee000 CR3: 06d1e000 CR4: 000006b0
[ 1.663358] Stack:
[ 1.663358] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.663358] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.663358] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.663358] Call Trace:
[ 1.663358] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.663358] [<c104d499>] task_work_run+0x79/0xa0
[ 1.663358] [<c1031202>] do_exit+0x2f2/0x950
[ 1.663358] [<c110a636>] ? __fput+0x216/0x380
[ 1.663358] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.663358] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.663358] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.663358] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.663358] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.688713] ---[ end trace 09588e96c335cb0f ]---
[ 1.689507] Fixing recursive fault but reboot is needed!

dmesg-quantal-jaketown-31:20131009003413:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 3.623281] ------------[ cut here ]------------
[ 3.624356] Kernel BUG at c10563af [verbose debug info unavailable]
[ 3.624356] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 3.624356] Modules linked in:
[ 3.624356] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 3.624356] task: c6c2a2c0 ti: c6d16000 task.ti: c6d16000
[ 3.624356] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 3.624356] EIP is at __put_cred+0x2f/0x90
[ 3.624356] EAX: c14bb720 EBX: c6d11080 ECX: 00000000 EDX: 00000001
[ 3.624356] ESI: c6c2a2c0 EDI: 00000001 EBP: c6d17f24 ESP: c6d17f18
[ 3.624356] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 3.624356] CR0: 8005003b CR2: b77db000 CR3: 06d12000 CR4: 000006b0
[ 3.624356] Stack:
[ 3.624356] c006ee00 c6c2a558 c6c2a2c0 c6d17f30 c110a408 c006ed00 c6d17f44 c104d499
[ 3.624356] c6c2a570 c6d18000 c6c2a2c0 c6d17f8c c1031202 00000000 c6d17f80 c110a636
[ 3.624356] 00000001 00000001 00000000 00000246 00000001 c6c2a558 c6d18050 c6c2a2c0
[ 3.624356] Call Trace:
[ 3.624356] [<c110a408>] file_free_rcu+0x28/0x40
[ 3.624356] [<c104d499>] task_work_run+0x79/0xa0
[ 3.624356] [<c1031202>] do_exit+0x2f2/0x950
[ 3.624356] [<c110a636>] ? __fput+0x216/0x380
[ 3.624356] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 3.624356] [<c1032858>] SyS_exit_group+0x18/0x20
[ 3.624356] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 3.624356] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 3.624356] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d17f18
[ 3.698673] ---[ end trace 1b998c263f6d23dd ]---
[ 3.700715] Fixing recursive fault but reboot is needed!

dmesg-quantal-lkp-st01-11:20131009003427:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.203638] ------------[ cut here ]------------
[ 2.204376] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.205357] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.206198] Modules linked in:
[ 2.206708] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.206795] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 2.206795] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.206795] EIP is at __put_cred+0x2f/0x90
[ 2.206795] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 2.206795] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 2.206795] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.206795] CR0: 8005003b CR2: b77cc000 CR3: 06d1e000 CR4: 000006b0
[ 2.206795] Stack:
[ 2.206795] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 2.206795] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 2.206795] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 2.206795] Call Trace:
[ 2.206795] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.206795] [<c104d499>] task_work_run+0x79/0xa0
[ 2.206795] [<c1031202>] do_exit+0x2f2/0x950
[ 2.206795] [<c110a636>] ? __fput+0x216/0x380
[ 2.206795] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.206795] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.206795] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.206795] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.206795] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 2.229464] ---[ end trace 923a2748b0895c86 ]---
[ 2.230243] Fixing recursive fault but reboot is needed!

dmesg-quantal-lkp-st01-9:20131009003354:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.198579] ------------[ cut here ]------------
[ 2.199309] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.200292] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.200773] Modules linked in:
[ 2.200773] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.200773] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 2.200773] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.200773] EIP is at __put_cred+0x2f/0x90
[ 2.200773] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 2.200773] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 2.200773] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.200773] CR0: 8005003b CR2: b7762000 CR3: 06d1e000 CR4: 000006b0
[ 2.200773] Stack:
[ 2.200773] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 2.200773] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 2.200773] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 2.200773] Call Trace:
[ 2.200773] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.200773] [<c104d499>] task_work_run+0x79/0xa0
[ 2.200773] [<c1031202>] do_exit+0x2f2/0x950
[ 2.200773] [<c110a636>] ? __fput+0x216/0x380
[ 2.200773] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.200773] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.200773] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.200773] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.200773] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 2.224358] ---[ end trace d92dad60f62732f8 ]---
[ 2.225080] Fixing recursive fault but reboot is needed!

dmesg-quantal-lkp-tt02-3:20131008150513:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.468734] ------------[ cut here ]------------
[ 2.469698] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.470992] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.471993] Modules linked in:
[ 2.471993] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.471993] task: c6c2a2c0 ti: c6d16000 task.ti: c6d16000
[ 2.471993] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.471993] EIP is at __put_cred+0x2f/0x90
[ 2.471993] EAX: c14bb720 EBX: c6d11080 ECX: 00000000 EDX: 00000001
[ 2.471993] ESI: c6c2a2c0 EDI: 00000001 EBP: c6d17f24 ESP: c6d17f18
[ 2.471993] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.471993] CR0: 8005003b CR2: b7748000 CR3: 06d12000 CR4: 000006b0
[ 2.471993] Stack:
[ 2.471993] c006ee00 c6c2a558 c6c2a2c0 c6d17f30 c110a408 c006ed00 c6d17f44 c104d499
[ 2.471993] c6c2a570 c6d18000 c6c2a2c0 c6d17f8c c1031202 00000000 c6d17f80 c110a636
[ 2.471993] 00000001 00000001 00000000 00000246 00000001 c6c2a558 c6d18050 c6c2a2c0
[ 2.471993] Call Trace:
[ 2.471993] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.471993] [<c104d499>] task_work_run+0x79/0xa0
[ 2.471993] [<c1031202>] do_exit+0x2f2/0x950
[ 2.471993] [<c110a636>] ? __fput+0x216/0x380
[ 2.471993] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.471993] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.471993] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.471993] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.471993] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d17f18
[ 2.503251] ---[ end trace 3b2042225c4df31d ]---
[ 2.504205] Fixing recursive fault but reboot is needed!

dmesg-quantal-lkp-tt02-7:20131008150522:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.428135] ------------[ cut here ]------------
[ 2.429119] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.430431] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.431049] Modules linked in:
[ 2.431049] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.431049] task: c6c2a2c0 ti: c6d16000 task.ti: c6d16000
[ 2.431049] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.431049] EIP is at __put_cred+0x2f/0x90
[ 2.431049] EAX: c14bb720 EBX: c6d11080 ECX: 00000000 EDX: 00000001
[ 2.431049] ESI: c6c2a2c0 EDI: 00000001 EBP: c6d17f24 ESP: c6d17f18
[ 2.431049] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.431049] CR0: 8005003b CR2: b7732000 CR3: 06d12000 CR4: 000006b0
[ 2.431049] Stack:
[ 2.431049] c006ee00 c6c2a558 c6c2a2c0 c6d17f30 c110a408 c006ed00 c6d17f44 c104d499
[ 2.431049] c6c2a570 c6d18000 c6c2a2c0 c6d17f8c c1031202 00000000 c6d17f80 c110a636
[ 2.431049] 00000001 00000001 00000000 00000246 00000001 c6c2a558 c6d18050 c6c2a2c0
[ 2.431049] Call Trace:
[ 2.431049] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.431049] [<c104d499>] task_work_run+0x79/0xa0
[ 2.431049] [<c1031202>] do_exit+0x2f2/0x950
[ 2.431049] [<c110a636>] ? __fput+0x216/0x380
[ 2.431049] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.431049] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.431049] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.431049] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.431049] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d17f18
[ 2.470717] ---[ end trace 49b1330184d07147 ]---
[ 2.472096] Fixing recursive fault but reboot is needed!

dmesg-quantal-snb-10:20131009003411:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.004517] ------------[ cut here ]------------
[ 2.005444] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.006199] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.006199] Modules linked in:
[ 2.006199] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.006199] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 2.006199] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.006199] EIP is at __put_cred+0x2f/0x90
[ 2.006199] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 2.006199] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 2.006199] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.006199] CR0: 8005003b CR2: b7751000 CR3: 06d1e000 CR4: 000006b0
[ 2.006199] Stack:
[ 2.006199] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 2.006199] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 2.006199] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 2.006199] Call Trace:
[ 2.006199] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.006199] [<c104d499>] task_work_run+0x79/0xa0
[ 2.006199] [<c1031202>] do_exit+0x2f2/0x950
[ 2.006199] [<c110a636>] ? __fput+0x216/0x380
[ 2.006199] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.006199] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.006199] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.006199] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.006199] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 2.035701] ---[ end trace 7c659a37d71008c4 ]---
[ 2.036575] Fixing recursive fault but reboot is needed!

dmesg-quantal-snb-14:20131009003352:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.873594] ------------[ cut here ]------------
[ 1.874449] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.875562] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.876517] Modules linked in:
[ 1.876825] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.876825] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.876825] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.876825] EIP is at __put_cred+0x2f/0x90
[ 1.876825] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.876825] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.876825] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.876825] CR0: 8005003b CR2: b775c000 CR3: 06d1e000 CR4: 000006b0
[ 1.876825] Stack:
[ 1.876825] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.876825] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.876825] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.876825] Call Trace:
[ 1.876825] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.876825] [<c104d499>] task_work_run+0x79/0xa0
[ 1.876825] [<c1031202>] do_exit+0x2f2/0x950
[ 1.876825] [<c110a636>] ? __fput+0x216/0x380
[ 1.876825] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.876825] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.876825] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.876825] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.876825] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.904117] ---[ end trace 751354922a6f111b ]---
[ 1.904956] Fixing recursive fault but reboot is needed!

dmesg-quantal-snb-5:20131009003359:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.939202] ------------[ cut here ]------------
[ 1.940093] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.940937] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.940937] Modules linked in:
[ 1.940937] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.940937] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.940937] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.940937] EIP is at __put_cred+0x2f/0x90
[ 1.940937] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.940937] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.940937] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.940937] CR0: 8005003b CR2: b7751000 CR3: 06d1e000 CR4: 000006b0
[ 1.940937] Stack:
[ 1.940937] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.940937] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.940937] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.940937] Call Trace:
[ 1.940937] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.940937] [<c104d499>] task_work_run+0x79/0xa0
[ 1.940937] [<c1031202>] do_exit+0x2f2/0x950
[ 1.940937] [<c110a636>] ? __fput+0x216/0x380
[ 1.940937] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.940937] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.940937] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.940937] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.940937] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.968415] ---[ end trace 8c5056fc7a63be1b ]---
[ 1.969230] Fixing recursive fault but reboot is needed!

dmesg-quantal-stoakley-7:20131009003427:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 2.027904] ------------[ cut here ]------------
[ 2.028164] Kernel BUG at c10563af [verbose debug info unavailable]
[ 2.028164] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 2.028164] Modules linked in:
[ 2.028164] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 2.028164] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 2.028164] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 2.028164] EIP is at __put_cred+0x2f/0x90
[ 2.028164] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 2.028164] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 2.028164] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 2.028164] CR0: 8005003b CR2: b77af000 CR3: 06d1e000 CR4: 000006b0
[ 2.028164] Stack:
[ 2.028164] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 2.028164] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 2.028164] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 2.028164] Call Trace:
[ 2.028164] [<c110a408>] file_free_rcu+0x28/0x40
[ 2.028164] [<c104d499>] task_work_run+0x79/0xa0
[ 2.028164] [<c1031202>] do_exit+0x2f2/0x950
[ 2.028164] [<c110a636>] ? __fput+0x216/0x380
[ 2.028164] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 2.028164] [<c1032858>] SyS_exit_group+0x18/0x20
[ 2.028164] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 2.028164] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 2.028164] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 2.050744] ---[ end trace 2e535460ae08e2e8 ]---
[ 2.051392] Fixing recursive fault but reboot is needed!

dmesg-quantal-waimea-10:20131009083054:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 0.933170] ------------[ cut here ]------------
[ 0.933702] Kernel BUG at c10563af [verbose debug info unavailable]
[ 0.934452] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 0.934728] Modules linked in:
[ 0.934728] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.934728] task: c6c322c0 ti: c6d2a000 task.ti: c6d2a000
[ 0.934728] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 0.934728] EIP is at __put_cred+0x2f/0x90
[ 0.934728] EAX: c14bb720 EBX: c6d17400 ECX: 00000000 EDX: 00000001
[ 0.934728] ESI: c6c322c0 EDI: 00000001 EBP: c6d2bf24 ESP: c6d2bf18
[ 0.934728] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.934728] CR0: 8005003b CR2: b7793000 CR3: 06d19000 CR4: 000006b0
[ 0.934728] Stack:
[ 0.934728] c006ee00 c6c32558 c6c322c0 c6d2bf30 c110a408 c006ed00 c6d2bf44 c104d499
[ 0.934728] c6c32570 c6d2c000 c6c322c0 c6d2bf8c c1031202 00000000 c6d2bf80 c110a636
[ 0.934728] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d2c050 c6c322c0
[ 0.934728] Call Trace:
[ 0.934728] [<c110a408>] file_free_rcu+0x28/0x40
[ 0.934728] [<c104d499>] task_work_run+0x79/0xa0
[ 0.934728] [<c1031202>] do_exit+0x2f2/0x950
[ 0.934728] [<c110a636>] ? __fput+0x216/0x380
[ 0.934728] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 0.934728] [<c1032858>] SyS_exit_group+0x18/0x20
[ 0.934728] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 0.934728] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 0.934728] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d2bf18
[ 0.952083] ---[ end trace e034291e60bada3a ]---
[ 0.952608] Fixing recursive fault but reboot is needed!

dmesg-quantal-xian-31:20131009003413:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.615252] ------------[ cut here ]------------
[ 1.616087] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.617129] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.618032] Modules linked in:
[ 1.618136] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.618136] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.618136] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.618136] EIP is at __put_cred+0x2f/0x90
[ 1.618136] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.618136] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.618136] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.618136] CR0: 8005003b CR2: b775f000 CR3: 06d1e000 CR4: 000006b0
[ 1.618136] Stack:
[ 1.618136] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.618136] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.618136] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.618136] Call Trace:
[ 1.618136] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.618136] [<c104d499>] task_work_run+0x79/0xa0
[ 1.618136] [<c1031202>] do_exit+0x2f2/0x950
[ 1.618136] [<c110a636>] ? __fput+0x216/0x380
[ 1.618136] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.618136] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.618136] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.618136] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.618136] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.640485] ---[ end trace 544ba4c9cb172e4b ]---
[ 1.641182] Fixing recursive fault but reboot is needed!

dmesg-quantal-xian-43:20131009003355:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

[ 1.638354] ------------[ cut here ]------------
[ 1.639150] Kernel BUG at c10563af [verbose debug info unavailable]
[ 1.639256] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[ 1.639256] Modules linked in:
[ 1.639256] CPU: 0 PID: 36 Comm: modprobe Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.639256] task: c6c322c0 ti: c6d1a000 task.ti: c6d1a000
[ 1.639256] EIP: 0060:[<c10563af>] EFLAGS: 00010202 CPU: 0
[ 1.639256] EIP is at __put_cred+0x2f/0x90
[ 1.639256] EAX: c14bb720 EBX: c6d17380 ECX: 00000000 EDX: 00000001
[ 1.639256] ESI: c6c322c0 EDI: 00000001 EBP: c6d1bf24 ESP: c6d1bf18
[ 1.639256] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.639256] CR0: 8005003b CR2: b77ac000 CR3: 06d1e000 CR4: 000006b0
[ 1.639256] Stack:
[ 1.639256] c006ee00 c6c32558 c6c322c0 c6d1bf30 c110a408 c006ed00 c6d1bf44 c104d499
[ 1.639256] c6c32570 c6d1c000 c6c322c0 c6d1bf8c c1031202 00000000 c6d1bf80 c110a636
[ 1.639256] 00000001 00000001 00000000 00000246 00000001 c6c32558 c6d1c050 c6c322c0
[ 1.639256] Call Trace:
[ 1.639256] [<c110a408>] file_free_rcu+0x28/0x40
[ 1.639256] [<c104d499>] task_work_run+0x79/0xa0
[ 1.639256] [<c1031202>] do_exit+0x2f2/0x950
[ 1.639256] [<c110a636>] ? __fput+0x216/0x380
[ 1.639256] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.639256] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.639256] [<c130ee30>] sysenter_do_call+0x12/0x3c
[ 1.639256] Code: 56 53 e8 35 8f 2b 00 89 c3 8b 00 8b 03 85 c0 0f 95 c0 25 ff 00 00 00 89 c6 31 c9 89 c2 b8 34 b7 4b c1 e8 25 1a 05 00 85 f6 74 02 <0f> 0b 8b 35 88 d7 46 c1 31 c0 39 9e a4 01 00 00 0f 94 c0 89 c7
[ 1.639256] EIP: [<c10563af>] __put_cred+0x2f/0x90 SS:ESP 0068:c6d1bf18
[ 1.665505] ---[ end trace 0e638a59e536f317 ]---
[ 1.666366] Fixing recursive fault but reboot is needed!

dmesg-yocto-lkp-tt02-2:20131008145515:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.997823] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.999402] IP: [< (null)>] (null)
[ 1.000224] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 1.000712] Oops: 0010 [#1] DEBUG_PAGEALLOC
[ 1.000712] Modules linked in:
[ 1.000712] CPU: 0 PID: 46 Comm: mount Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 1.000712] task: cd7c3cd0 ti: cd10a000 task.ti: cd10a000
[ 1.000712] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 1.000712] EIP is at 0x0
[ 1.000712] EAX: cd0dc500 EBX: cd0dce00 ECX: 00000000 EDX: cd0dc500
[ 1.000712] ESI: cd7c3f68 EDI: cd7c3cd0 EBP: cd10bf44 ESP: cd10bf34
[ 1.000712] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.000712] CR0: 8005003b CR2: 00000000 CR3: 0d102000 CR4: 000006b0
[ 1.000712] Stack:
[ 1.000712] c104d499 cd7c3f80 cd0d6a00 cd7c3cd0 cd10bf8c c1031202 00000000 00000000
[ 1.000712] cee9d000 00000035 00000001 cd10bf88 c1109351 00000001 00000000 cd0d6a50
[ 1.000712] cd7c3cd0 080d3208 cd10bf9c 0000ff00 cd0ea600 cd7c3cd0 cd10bfa4 c10327ea
[ 1.000712] Call Trace:
[ 1.000712] [<c104d499>] ? task_work_run+0x79/0xa0
[ 1.000712] [<c1031202>] do_exit+0x2f2/0x950
[ 1.000712] [<c1109351>] ? vfs_write+0x161/0x1a0
[ 1.000712] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 1.000712] [<c1032858>] SyS_exit_group+0x18/0x20
[ 1.000712] [<c1307a45>] syscall_call+0x7/0xb
[ 1.000712] Code: Bad EIP value.
[ 1.000712] EIP: [<00000000>] 0x0 SS:ESP 0068:cd10bf34
[ 1.000712] CR2: 0000000000000000

dmesg-yocto-nhm4-1:20131008162924:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.441443] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.442048] IP: [<c110a470>] __fput+0x50/0x380
[ 0.442432] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.442928] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 0.443319] Modules linked in:
[ 0.443524] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.443524] Workqueue: events delayed_fput
[ 0.443524] task: c0035f90 ti: ce866000 task.ti: ce866000
[ 0.443524] EIP: 0060:[<c110a470>] EFLAGS: 00010212 CPU: 0
[ 0.443524] EIP is at __fput+0x50/0x380
[ 0.443524] EAX: 00000000 EBX: cd0e3200 ECX: 00000000 EDX: 0000001d
[ 0.443524] ESI: 00000010 EDI: 00000000 EBP: ce867e98 ESP: ce867e70
[ 0.443524] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.443524] CR0: 8005003b CR2: 00000000 CR3: 0d10b000 CR4: 000006b0
[ 0.443524] Stack:
[ 0.443524] 00000246 00000000 00000002 00000000 00000000 00000000 00000000 00000000
[ 0.443524] 00000000 c0124540 ce867ea4 c110a7c9 c148d640 ce867efc c1048fb9 00000000
[ 0.443524] 00000002 00000000 c1048f81 00000000 00000000 00000000 0019ebc7 c0083400
[ 0.443524] Call Trace:
[ 0.443524] [<c110a7c9>] delayed_fput+0x29/0x30
[ 0.443524] [<c1048fb9>] process_one_work+0x2f9/0x650
[ 0.443524] [<c1048f81>] ? process_one_work+0x2c1/0x650
[ 0.443524] [<c104a8ef>] worker_thread+0x28f/0x610
[ 0.443524] [<c104a660>] ? cancel_delayed_work_sync+0x20/0x20
[ 0.443524] [<c1050902>] kthread+0x92/0xa0
[ 0.443524] [<c130ed9b>] ret_from_kernel_thread+0x1b/0x30
[ 0.443524] [<c1050870>] ? kthread_create_on_node+0xd0/0xd0
[ 0.443524] Code: 00 b8 ad 5e 41 c1 e8 b0 fe f4 ff e8 fb b1 1f 00 8b 43 10 89 c1 89 45 e8 8b 53 40 89 d0 83 e0 02 83 f8 01 19 f6 83 e6 08 83 c6 08 <8b> 01 25 00 f0 ff ff 66 3d 00 40 0f 84 2f 02 00 00 81 e2 00 00
[ 0.443524] EIP: [<c110a470>] __fput+0x50/0x380 SS:ESP 0068:ce867e70
[ 0.443524] CR2: 0000000000000000
[ 0.456633] ---[ end trace 904c44bc0abd3aee ]---
[ 0.460187] Kernel panic - not syncing: CRED: put_cred_rcu() sees cd0c6d00 with usage -1

dmesg-yocto-snb-38:20131009002344:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.918117] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.919547] IP: [< (null)>] (null)
[ 0.919794] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.919794] Oops: 0010 [#1] DEBUG_PAGEALLOC
[ 0.919794] Modules linked in:
[ 0.919794] CPU: 0 PID: 46 Comm: mount Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.919794] task: cd7cbcd0 ti: cd10e000 task.ti: cd10e000
[ 0.919794] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 0.919794] EIP is at 0x0
[ 0.919794] EAX: cd0e3500 EBX: cd0e3e00 ECX: 00000000 EDX: cd0e3500
[ 0.919794] ESI: cd7cbf68 EDI: cd7cbcd0 EBP: cd10ff44 ESP: cd10ff34
[ 0.919794] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.919794] CR0: 8005003b CR2: 00000000 CR3: 0d10a000 CR4: 000006b0
[ 0.919794] Stack:
[ 0.919794] c104d499 cd7cbf80 cd0daa00 cd7cbcd0 cd10ff8c c1031202 00000000 00000000
[ 0.919794] cee9d000 00000035 00000001 cd10ff88 c1109351 00000001 00000000 cd0daa50
[ 0.919794] cd7cbcd0 080d3208 cd10ff9c 0000ff00 cd0ee600 cd7cbcd0 cd10ffa4 c10327ea
[ 0.919794] Call Trace:
[ 0.919794] [<c104d499>] ? task_work_run+0x79/0xa0
[ 0.919794] [<c1031202>] do_exit+0x2f2/0x950
[ 0.919794] [<c1109351>] ? vfs_write+0x161/0x1a0
[ 0.919794] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 0.919794] [<c1032858>] SyS_exit_group+0x18/0x20
[ 0.919794] [<c1307a45>] syscall_call+0x7/0xb
[ 0.919794] Code: Bad EIP value.
[ 0.919794] EIP: [<00000000>] 0x0 SS:ESP 0068:cd10ff34
[ 0.919794] CR2: 0000000000000000

dmesg-yocto-snb-43:20131009002416:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.873183] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.874508] IP: [< (null)>] (null)
[ 0.874688] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.874688] Oops: 0010 [#1] DEBUG_PAGEALLOC
[ 0.874688] Modules linked in:
[ 0.874688] CPU: 0 PID: 46 Comm: mount Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.874688] task: cd7cbcd0 ti: cd10e000 task.ti: cd10e000
[ 0.874688] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 0.874688] EIP is at 0x0
[ 0.874688] EAX: cd0e3100 EBX: cd0e3e00 ECX: 00000000 EDX: cd0e3100
[ 0.874688] ESI: cd7cbf68 EDI: cd7cbcd0 EBP: cd10ff44 ESP: cd10ff34
[ 0.874688] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.874688] CR0: 8005003b CR2: 00000000 CR3: 0d10a000 CR4: 000006b0
[ 0.874688] Stack:
[ 0.874688] c104d499 cd7cbf80 cd0daa00 cd7cbcd0 cd10ff8c c1031202 00000000 00000000
[ 0.874688] cee9d000 00000035 00000001 cd10ff88 c1109351 00000001 00000000 cd0daa50
[ 0.874688] cd7cbcd0 080d3208 cd10ff9c 0000ff00 cd0ee600 cd7cbcd0 cd10ffa4 c10327ea
[ 0.874688] Call Trace:
[ 0.874688] [<c104d499>] ? task_work_run+0x79/0xa0
[ 0.874688] [<c1031202>] do_exit+0x2f2/0x950
[ 0.874688] [<c1109351>] ? vfs_write+0x161/0x1a0
[ 0.874688] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 0.874688] [<c1032858>] SyS_exit_group+0x18/0x20
[ 0.874688] [<c1307a45>] syscall_call+0x7/0xb
[ 0.874688] Code: Bad EIP value.
[ 0.874688] EIP: [<00000000>] 0x0 SS:ESP 0068:cd10ff34
[ 0.874688] CR2: 0000000000000000

dmesg-yocto-stoakley-3:20131009002418:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.831874] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 0.832409] BUG: unable to handle kernel paging request at cd0e3a08
[ 0.832409] IP: [<cd0e3a08>] 0xcd0e3a07
[ 0.832409] *pdpt = 000000000151c001 *pde = 000000000fbfc067 *pte = 800000000d0e3163
[ 0.832409] Oops: 0011 [#1] DEBUG_PAGEALLOC
[ 0.832409] Modules linked in:
[ 0.832409] CPU: 0 PID: 46 Comm: mount Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.832409] task: cd7cbcd0 ti: cd10e000 task.ti: cd10e000
[ 0.832409] EIP: 0060:[<cd0e3a08>] EFLAGS: 00010246 CPU: 0
[ 0.832409] EIP is at 0xcd0e3a08
[ 0.832409] EAX: cd0e3a00 EBX: cd0e3800 ECX: 00000000 EDX: cd0e3a00
[ 0.832409] ESI: cd7cbf68 EDI: cd7cbcd0 EBP: cd10ff44 ESP: cd10ff34
[ 0.832409] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.832409] CR0: 8005003b CR2: cd0e3a08 CR3: 0d10a000 CR4: 000006b0
[ 0.832409] Stack:
[ 0.832409] c104d499 cd7cbf80 cd0daa00 cd7cbcd0 cd10ff8c c1031202 00000000 00000000
[ 0.832409] cee9d000 00000035 00000001 cd10ff88 c1109351 00000001 00000000 cd0daa50
[ 0.832409] cd7cbcd0 080d3208 cd10ff9c 0000ff00 cd0ee600 cd7cbcd0 cd10ffa4 c10327ea
[ 0.832409] Call Trace:
[ 0.832409] [<c104d499>] ? task_work_run+0x79/0xa0
[ 0.832409] [<c1031202>] do_exit+0x2f2/0x950
[ 0.832409] [<c1109351>] ? vfs_write+0x161/0x1a0
[ 0.832409] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 0.832409] [<c1032858>] SyS_exit_group+0x18/0x20
[ 0.832409] [<c1307a45>] syscall_call+0x7/0xb
[ 0.832409] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 0e cd 08 3a 0e cd <20> 00 00 00 4c 3a 0e cd 44 3a 0e cd 48 3a 0e cd 01 00 00 00 ad
[ 0.832409] EIP: [<cd0e3a08>] 0xcd0e3a08 SS:ESP 0068:cd10ff34
[ 0.832409] CR2: 00000000cd0e3a08

dmesg-yocto-stoakley-4:20131009002412:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.840034] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.841074] IP: [< (null)>] (null)
[ 0.841610] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.841824] Oops: 0010 [#1] DEBUG_PAGEALLOC
[ 0.841824] Modules linked in:
[ 0.841824] CPU: 0 PID: 46 Comm: mount Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.841824] task: cd7cbcd0 ti: cd10e000 task.ti: cd10e000
[ 0.841824] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 0.841824] EIP is at 0x0
[ 0.841824] EAX: cd0e3100 EBX: cd0e3e00 ECX: 00000000 EDX: cd0e3100
[ 0.841824] ESI: cd7cbf68 EDI: cd7cbcd0 EBP: cd10ff44 ESP: cd10ff34
[ 0.841824] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.841824] CR0: 8005003b CR2: 00000000 CR3: 0d10a000 CR4: 000006b0
[ 0.841824] Stack:
[ 0.841824] c104d499 cd7cbf80 cd0daa00 cd7cbcd0 cd10ff8c c1031202 00000000 00000000
[ 0.841824] cee9d000 00000035 00000001 cd10ff88 c1109351 00000001 00000000 cd0daa50
[ 0.841824] cd7cbcd0 080d3208 cd10ff9c 0000ff00 cd0ee600 cd7cbcd0 cd10ffa4 c10327ea
[ 0.841824] Call Trace:
[ 0.841824] [<c104d499>] ? task_work_run+0x79/0xa0
[ 0.841824] [<c1031202>] do_exit+0x2f2/0x950
[ 0.841824] [<c1109351>] ? vfs_write+0x161/0x1a0
[ 0.841824] [<c10327ea>] do_group_exit+0x4a/0xa0
[ 0.841824] [<c1032858>] SyS_exit_group+0x18/0x20
[ 0.841824] [<c1307a45>] syscall_call+0x7/0xb
[ 0.841824] Code: Bad EIP value.
[ 0.841824] EIP: [<00000000>] 0x0 SS:ESP 0068:cd10ff34
[ 0.841824] CR2: 0000000000000000

dmesg-yocto-xian-45:20131009002407:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.780760] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.781899] IP: [<c110a470>] __fput+0x50/0x380
[ 0.782253] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.782253] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 0.782253] Modules linked in:
[ 0.782253] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.782253] Workqueue: events delayed_fput
[ 0.782253] task: c0035f90 ti: ce866000 task.ti: ce866000
[ 0.782253] EIP: 0060:[<c110a470>] EFLAGS: 00010212 CPU: 0
[ 0.782253] EIP is at __fput+0x50/0x380
[ 0.782253] EAX: 00000000 EBX: cd0e3700 ECX: 00000000 EDX: 0000001d
[ 0.782253] ESI: 00000010 EDI: 00000000 EBP: ce867e98 ESP: ce867e70
[ 0.782253] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.782253] CR0: 8005003b CR2: 00000000 CR3: 0d10a000 CR4: 000006b0
[ 0.782253] Stack:
[ 0.782253] 00000246 00000000 00000002 00000000 00000000 00000000 00000000 00000000
[ 0.782253] 00000000 c0124540 ce867ea4 c110a7c9 c148d640 ce867efc c1048fb9 00000000
[ 0.782253] 00000002 00000000 c1048f81 00000000 00000000 00000000 0019ebc7 c0083400
[ 0.782253] Call Trace:
[ 0.782253] [<c110a7c9>] delayed_fput+0x29/0x30
[ 0.782253] [<c1048fb9>] process_one_work+0x2f9/0x650
[ 0.782253] [<c1048f81>] ? process_one_work+0x2c1/0x650
[ 0.782253] [<c104a8ef>] worker_thread+0x28f/0x610
[ 0.782253] [<c104a660>] ? cancel_delayed_work_sync+0x20/0x20
[ 0.782253] [<c1050902>] kthread+0x92/0xa0
[ 0.782253] [<c130ed9b>] ret_from_kernel_thread+0x1b/0x30
[ 0.782253] [<c1050870>] ? kthread_create_on_node+0xd0/0xd0
[ 0.782253] Code: 00 b8 ad 5e 41 c1 e8 b0 fe f4 ff e8 fb b1 1f 00 8b 43 10 89 c1 89 45 e8 8b 53 40 89 d0 83 e0 02 83 f8 01 19 f6 83 e6 08 83 c6 08 <8b> 01 25 00 f0 ff ff 66 3d 00 40 0f 84 2f 02 00 00 81 e2 00 00
[ 0.782253] EIP: [<c110a470>] __fput+0x50/0x380 SS:ESP 0068:ce867e70
[ 0.782253] CR2: 0000000000000000
[ 0.810230] ---[ end trace 30f0c5539123580d ]---
[ 0.815604] Kernel panic - not syncing: CRED: put_cred_rcu() sees cd0c6c00 with usage -1

dmesg-yocto-xps-4:20131009081942:i386-randconfig-r8-1005:3.12.0-rc1-00050-g0c44c2d:391

mount: mounting proc on /proc failed: No such device
[ 0.510689] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.511333] IP: [<c110a470>] __fput+0x50/0x380
[ 0.511670] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.511670] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 0.511670] Modules linked in:
[ 0.511670] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 3.12.0-rc1-00050-g0c44c2d #391
[ 0.511670] Workqueue: events delayed_fput
[ 0.511670] task: c0035f90 ti: ce866000 task.ti: ce866000
[ 0.511670] EIP: 0060:[<c110a470>] EFLAGS: 00010212 CPU: 0
[ 0.511670] EIP is at __fput+0x50/0x380
[ 0.511670] EAX: 00000000 EBX: cd0e3200 ECX: 00000000 EDX: 0000001d
[ 0.511670] ESI: 00000010 EDI: 00000000 EBP: ce867e98 ESP: ce867e70
[ 0.511670] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.511670] CR0: 8005003b CR2: 00000000 CR3: 0d10b000 CR4: 000006b0
[ 0.511670] Stack:
[ 0.511670] 00000246 00000000 00000002 00000000 00000000 00000000 00000000 00000000
[ 0.511670] 00000000 c0124540 ce867ea4 c110a7c9 c148d640 ce867efc c1048fb9 00000000
[ 0.511670] 00000002 00000000 c1048f81 00000000 00000000 00000000 0019ebc7 c0083400
[ 0.511670] Call Trace:
[ 0.511670] [<c110a7c9>] delayed_fput+0x29/0x30
[ 0.511670] [<c1048fb9>] process_one_work+0x2f9/0x650
[ 0.511670] [<c1048f81>] ? process_one_work+0x2c1/0x650
[ 0.511670] [<c104a8ef>] worker_thread+0x28f/0x610
[ 0.511670] [<c104a660>] ? cancel_delayed_work_sync+0x20/0x20
[ 0.511670] [<c1050902>] kthread+0x92/0xa0
[ 0.511670] [<c130ed9b>] ret_from_kernel_thread+0x1b/0x30
[ 0.511670] [<c1050870>] ? kthread_create_on_node+0xd0/0xd0
[ 0.511670] Code: 00 b8 ad 5e 41 c1 e8 b0 fe f4 ff e8 fb b1 1f 00 8b 43 10 89 c1 89 45 e8 8b 53 40 89 d0 83 e0 02 83 f8 01 19 f6 83 e6 08 83 c6 08 <8b> 01 25 00 f0 ff ff 66 3d 00 40 0f 84 2f 02 00 00 81 e2 00 00
[ 0.511670] EIP: [<c110a470>] __fput+0x50/0x380 SS:ESP 0068:ce867e70
[ 0.511670] CR2: 0000000000000000
[ 0.526608] ---[ end trace 490bc283e6fc34f9 ]---
[ 0.530504] Kernel panic - not syncing: CRED: put_cred_rcu() sees cd0c6d00 with usage -1
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.12.0-rc1-00080-gfb869b6 (kbuild@roam) (gcc version 4.8.1 (Debian 4.8.1-8) ) #3 Sat Oct 5 02:03:33 CST 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff]
[ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k
[ 0.000000] BRK [0x01a68000, 0x01a68fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff]
[ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k
[ 0.000000] BRK [0x01a69000, 0x01a69fff] PGTABLE
[ 0.000000] BRK [0x01a6a000, 0x01a6afff] PGTABLE
[ 0.000000] BRK [0x01a6b000, 0x01a6bfff] PGTABLE
[ 0.000000] BRK [0x01a6c000, 0x01a6cfff] PGTABLE
[ 0.000000] BRK [0x01a6d000, 0x01a6dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x0bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff]
[ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 128140(97%)
[ 0.000000] RAMDISK: [mem 0x0fce4000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 000fd920 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0fffff40 00040
[ 0.000000] ACPI: SSDT 0ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fffe000
[ 0.000000] low ram: 0 - 0fffe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00001000-0x0fffdfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] free_area_init_node: node 0, pgdat c14b2620, node_mem_map cf116028
[ 0.000000] Normal zone: 640 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65436 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1474dc0
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796
[ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r8-1005/tip:sched:core/.vmlinuz-fb869b6e91a3ac235f237f73305ecf34cdc4969b-20131005020535-7-waimea branch=tip/sched/core BOOT_IMAGE=/kernel/i386-randconfig-r8-1005/fb869b6e91a3ac235f237f73305ecf34cdc4969b/vmlinuz-3.12.0-rc1-00080-gfb869b6
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 236440K/261744K available (3126K kernel code, 483K rwdata, 1340K rodata, 276K init, 5360K bss, 25304K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffe2000 - 0xfffff000 ( 116 kB)
[ 0.000000] vmalloc : 0xd07fe000 - 0xfffe0000 ( 759 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB)
[ 0.000000] .init : 0xc14d7000 - 0xc151c000 ( 276 kB)
[ 0.000000] .data : 0xc130deeb - 0xc14d6d80 (1827 kB)
[ 0.000000] .text : 0xc1000000 - 0xc130deeb (3127 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] CPU 0 irqstacks, hard=c0092000 soft=c0094000
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 3300.306 MHz processor
[ 0.006666] Calibrating delay loop (skipped) preset value.. 6603.63 BogoMIPS (lpj=11001020)
[ 0.006666] pid_max: default: 32768 minimum: 301
[ 0.006767] Security Framework initialized
[ 0.007507] Mount-cache hash table entries: 512
[ 0.008917] Initializing cgroup subsys perf_event
[ 0.010111] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.010111] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.010111] tlb_flushall_shift: 6
[ 0.012382] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.016756] ACPI: Core revision 20130725
[ 0.019536] ACPI: All ACPI Tables successfully acquired
[ 0.020070] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.021099] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.024712] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.026494] devtmpfs: initialized
[ 0.028604] NET: Registered protocol family 16
[ 0.030424] cpuidle: using governor menu
[ 0.031358] ACPI: bus type PCI registered
[ 0.032213] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.033343] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0
[ 0.034394] PCI: Using configuration type 1 for base access
[ 0.036933] ACPI: Added _OSI(Module Device)
[ 0.037662] ACPI: Added _OSI(Processor Device)
[ 0.038412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.039175] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.041960] ACPI: EC: Look up EC in DSDT
[ 0.047666] ACPI: Interpreter enabled
[ 0.048314] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.049875] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.050997] ACPI: (supports S0 S3 S5)
[ 0.051659] ACPI: Using PIC for interrupt routing
[ 0.052462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.064708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.065800] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.067063] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.069226] PCI host bridge to bus 0000:00
[ 0.070010] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.070970] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.072028] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.073342] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.074515] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.075809] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.077477] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.080306] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.084600] pci 0000:00:01.1: reg 0x20: [io 0xc1e0-0xc1ef]
[ 0.087433] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.089022] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.090023] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.091697] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.094262] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.096680] pci 0000:00:02.0: reg 0x14: [mem 0xfebe4000-0xfebe4fff]
[ 0.105427] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.107193] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.109483] pci 0000:00:03.0: reg 0x10: [io 0xc1c0-0xc1df]
[ 0.111200] pci 0000:00:03.0: reg 0x14: [mem 0xfebe5000-0xfebe5fff]
[ 0.119021] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.120565] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.122782] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.124536] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.132418] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 0.133801] pci 0000:00:05.0: [8086:2668] type 00 class 0x040300
[ 0.135553] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe3fff]
[ 0.141546] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[ 0.143969] pci 0000:00:06.0: reg 0x10: [io 0xc040-0xc07f]
[ 0.146130] pci 0000:00:06.0: reg 0x14: [mem 0xfebe6000-0xfebe6fff]
[ 0.153978] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[ 0.156676] pci 0000:00:07.0: reg 0x10: [io 0xc080-0xc0bf]
[ 0.158850] pci 0000:00:07.0: reg 0x14: [mem 0xfebe7000-0xfebe7fff]
[ 0.167031] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[ 0.169322] pci 0000:00:08.0: reg 0x10: [io 0xc0c0-0xc0ff]
[ 0.171198] pci 0000:00:08.0: reg 0x14: [mem 0xfebe8000-0xfebe8fff]
[ 0.179067] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 0.181264] pci 0000:00:09.0: reg 0x10: [io 0xc100-0xc13f]
[ 0.183923] pci 0000:00:09.0: reg 0x14: [mem 0xfebe9000-0xfebe9fff]
[ 0.191204] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000
[ 0.193962] pci 0000:00:0a.0: reg 0x10: [io 0xc140-0xc17f]
[ 0.196088] pci 0000:00:0a.0: reg 0x14: [mem 0xfebea000-0xfebeafff]
[ 0.203931] pci 0000:00:0b.0: [1af4:1001] type 00 class 0x010000
[ 0.206247] pci 0000:00:0b.0: reg 0x10: [io 0xc180-0xc1bf]
[ 0.207886] pci 0000:00:0b.0: reg 0x14: [mem 0xfebeb000-0xfebebfff]
[ 0.217014] pci 0000:00:0c.0: [8086:25ab] type 00 class 0x088000
[ 0.218686] pci 0000:00:0c.0: reg 0x10: [mem 0xfebec000-0xfebec00f]
[ 0.224248] pci_bus 0000:00: on NUMA node 0
[ 0.226198] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.227195] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.228508] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.230431] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.231642] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.233735] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.234634] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235681] Found 1 acpi root devices
[ 0.236929] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.238337] vgaarb: loaded
[ 0.238792] vgaarb: bridge control possible 0000:00:02.0
[ 0.239743] Linux video capture interface: v2.00
[ 0.240059] pps_core: LinuxPPS API ver. 1 registered
[ 0.240916] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.242453] PTP clock support registered
[ 0.243360] Advanced Linux Sound Architecture Driver Initialized.
[ 0.244393] PCI: Using ACPI for IRQ routing
[ 0.245115] PCI: pci_cache_line_size set to 64 bytes
[ 0.246915] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.247938] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 0.249650] Switched to clocksource kvm-clock
[ 0.249650] Warning: could not register annotated branches stats
[ 0.279761] pnp: PnP ACPI init
[ 0.280537] ACPI: bus type PNP registered
[ 0.281440] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.282691] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.284052] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.285318] pnp 00:03: [dma 2]
[ 0.285897] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.287363] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.288638] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.290215] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.291742] pnp: PnP ACPI: found 7 devices
[ 0.292512] ACPI: bus type PNP unregistered
[ 0.328748] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.329477] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.330217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.331102] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.331884] NET: Registered protocol family 1
[ 0.332469] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.333247] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.334215] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.335009] pci 0000:00:02.0: Boot video device
[ 0.335714] PCI: CLS 0 bytes, default 64
[ 0.336428] Unpacking initramfs...
[ 0.418851] debug: unmapping init [mem 0xcfce4000-0xcffeffff]
[ 0.429840] DMA-API: preallocated 65536 debug entries
[ 0.430688] DMA-API: debugging enabled by kernel config
[ 0.431849] NatSemi SCx200 Driver
[ 0.441526] Kprobe smoke test started
[ 0.446157] Kprobe smoke test passed successfully
[ 0.446981] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.449475] VFS: Disk quotas dquot_6.5.2
[ 0.449991] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.451502] msgmni has been set to 461
[ 0.453078] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.453808] crc32: self tests passed, processed 225944 bytes in 140080 nsec
[ 0.454811] crc32c: CRC_LE_BITS = 64
[ 0.455233] crc32c: self tests passed, processed 225944 bytes in 70577 nsec
[ 0.456243] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.457313] ACPI: Power Button [PWRF]
[ 0.470521] HDLC line discipline maxframe=4096
[ 0.471032] N_HDLC line discipline registered.
[ 0.471552] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.496002] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.498202] ppdev: user-space parallel port driver
[ 0.498806] nsc_gpio initializing
[ 0.499252] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 0.499937] parport_pc 00:04: reported by Plug and Play ACPI
[ 0.500929] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[ 0.502381] dummy-irq: no IRQ given. Use irq=N
[ 0.503148] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.504890] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.505526] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.566411] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 0.568218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.569267] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 0.570847] mk712: device not present
[ 0.571307] IR RC5 (streamzap) protocol handler initialized
[ 0.571995] IR SANYO protocol handler initialized
[ 0.572571] IR MCE Keyboard/mouse protocol handler initialized
[ 0.573271] Registered IR keymap rc-empty
[ 0.574096] input: rc-core loopback device as /devices/virtual/rc/rc0/input2
[ 0.574952] evbug: Connected device: input2 (rc-core loopback device at rc-core/virtual)
[ 0.576008] rc0: rc-core loopback device as /devices/virtual/rc/rc0
[ 0.577332] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input3
[ 0.578314] evbug: Connected device: input3 (MCE IR Keyboard/Mouse (rc-loopback) at /input0)
[ 0.579429] intel_powerclamp: Intel powerclamp does not run on family 15 model 6
[ 0.580504] hdaps: supported laptop not found!
[ 0.581019] hdaps: driver init failed (ret=-19)!
[ 0.582029] IMA: No TPM chip found, activating TPM-bypass!
[ 0.583512] ALSA device list:
[ 0.584010] No soundcards found.
[ 0.585252] debug: unmapping init [mem 0xc14d7000-0xc151bfff]

mount: mounting proc on /proc failed: No such device
[ 0.594703] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 0.595687] IP: [<c11098e0>] __fput+0x50/0x380
[ 0.596233] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[ 0.596926] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 0.596926] Modules linked in:
[ 0.596926] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 3.12.0-rc1-00080-gfb869b6 #3
[ 0.596926] Workqueue: events delayed_fput
[ 0.596926] task: c0035f90 ti: ce866000 task.ti: ce866000
[ 0.596926] EIP: 0060:[<c11098e0>] EFLAGS: 00010212 CPU: 0
[ 0.596926] EIP is at __fput+0x50/0x380
[ 0.596926] EAX: 00000000 EBX: cd0e3600 ECX: 00000000 EDX: 0000001d
[ 0.596926] ESI: 00000010 EDI: 00000000 EBP: ce867e98 ESP: ce867e70
[ 0.596926] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.596926] CR0: 8005003b CR2: 00000000 CR3: 0d10b000 CR4: 000006b0
[ 0.596926] Stack:
[ 0.596926] 00000246 00000000 00000002 00000000 00000000 00000000 00000000 00000000
[ 0.596926] 00000000 c0124540 ce867ea4 c1109c39 c148d640 ce867efc c1048c59 00000000
[ 0.596926] 00000002 00000000 c1048c21 00000000 00000000 00000000 0019dab7 c0083400
[ 0.596926] Call Trace:
[ 0.596926] [<c1109c39>] delayed_fput+0x29/0x30
[ 0.596926] [<c1048c59>] process_one_work+0x2f9/0x640
[ 0.596926] [<c1048c21>] ? process_one_work+0x2c1/0x640
[ 0.596926] [<c104a57f>] worker_thread+0x28f/0x610
[ 0.596926] [<c104a2f0>] ? cancel_delayed_work_sync+0x20/0x20
[ 0.596926] [<c1050522>] kthread+0x92/0xa0
[ 0.596926] [<c130cf7b>] ret_from_kernel_thread+0x1b/0x30
[ 0.596926] [<c1050490>] ? kthread_create_on_node+0xd0/0xd0
[ 0.596926] Code: 00 b8 48 31 41 c1 e8 f0 05 f5 ff e8 5b a1 1f 00 8b 43 10 89 c1 89 45 e8 8b 53 40 89 d0 83 e0 02 83 f8 01 19 f6 83 e6 08 83 c6 08 <8b> 01 25 00 f0 ff ff 66 3d 00 40 0f 84 2f 02 00 00 81 e2 00 00
[ 0.596926] EIP: [<c11098e0>] __fput+0x50/0x380 SS:ESP 0068:ce867e70
[ 0.596926] CR2: 0000000000000000
[ 0.617953] ---[ end trace 03381f1a63e10aed ]---
[ 0.622129] Kernel panic - not syncing: CRED: put_cred_rcu() sees cd0c6d00 with usage -1
[ 0.622129]
[ 0.623278] Rebooting in 10 seconds..
BUG: kernel boot oops
Elapsed time: 5
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-r8-1005/fb869b6e91a3ac235f237f73305ecf34cdc4969b/vmlinuz-3.12.0-rc1-00080-gfb869b6 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r8-1005/tip:sched:core/.vmlinuz-fb869b6e91a3ac235f237f73305ecf34cdc4969b-20131005020535-7-waimea branch=tip/sched/core BOOT_IMAGE=/kernel/i386-randconfig-r8-1005/fb869b6e91a3ac235f237f73305ecf34cdc4969b/vmlinuz-3.12.0-rc1-00080-gfb869b6' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::8316-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -soundhw hda -drive file=/fs/LABEL=KVM/disk0-yocto-waimea-12,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-yocto-waimea-12,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-yocto-waimea-12,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-yocto-waimea-12,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-yocto-waimea-12,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-yocto-waimea-12,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-yocto-waimea-12 -serial file:/dev/shm/kboot/serial-yocto-waimea-12 -daemonize -display none -monitor null

Attachment: bisect-fb869b6e91a3ac235f237f73305ecf34cdc4969b-i386-randconfig-r8-1005-BUG:-unable-to-handle-kernel-18490.log
Description: Binary data

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.12.0-rc1 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_WANT_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
CONFIG_MWINCHIP3D=y
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_OOSTORE=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_ALIX is not set
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_DMA_CMA is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_SCx200_DOCFLASH=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ATMEL_SSC=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_PCH_PHUB is not set
CONFIG_SRAM=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set

#
# Altera FPGA firmware download module
#
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_VHOST_NET is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_WISTRON_BTNS=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=y
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_TS5500=m
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=m

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS1WM=m
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=y

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_CROS_EC=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_V4L2_INT_DEVICE=m

#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
# CONFIG_MEDIA_PCI_SUPPORT is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_RADIO_ADAPTERS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_ATTACH=y

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#

#
# Sensors used on soc_camera driver
#

#
# Customize TV tuners
#

#
# Customise DVB Frontends
#

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
# CONFIG_SOUND_UART6850 is not set
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
# CONFIG_SOUND_KAHLUA is not set

#
# HID support
#
# CONFIG_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_OMAP_CONTROL_USB is not set
# CONFIG_OMAP_USB3 is not set
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_OMAP_HS=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_NET48XX is not set
CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_OT200=m

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=y
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_KFIFO_BUF is not set
# CONFIG_IIO_TRIGGER is not set

#
# Accelerometers
#

#
# Analog to digital converters
#
CONFIG_TI_AM335X_ADC=m

#
# Amplifiers
#

#
# Hid Sensor IIO Common
#

#
# Digital to analog converters
#

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#

#
# Inertial measurement units
#

#
# Light sensors
#

#
# Magnetometer sensors
#

#
# Pressure sensors
#

#
# Temperature sensors
#
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=m
# CONFIG_FMC_TRIVIAL is not set
CONFIG_FMC_WRITE_EEPROM=m
CONFIG_FMC_CHARDEV=m

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_LOGFS=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
# CONFIG_PSTORE is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MMC_REQUEST is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
CONFIG_STACK_TRACER=y
# CONFIG_KPROBE_EVENT is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_X86_DEBUG_STATIC_CPU_HAS=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_APPRAISE=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_LGUEST=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set

Next message: Eric Dumazet: "Re: [PATCH] core: Catch overflows in do_div() function"
Previous message: Bhushan Bharat-R65777: "RE: [PATCH 1/7] powerpc: Add interface to get msi region information"
In reply to: Linus Torvalds: "Re: [x86] BUG: unable to handle kernel paging request at 00740060"
Next in thread: Linus Torvalds: "Re: [x86] BUG: unable to handle kernel NULL pointer dereference at (null)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]