Re: [PATCH v2] usb: hub: Clear Port Reset Change during init/resume

From: Alan Stern
Date: Wed Oct 16 2013 - 10:40:33 EST


On Tue, 15 Oct 2013, Julius Werner wrote:

> This patch adds the Port Reset Change flag to the set of bits that are
> preemptively cleared on init/resume of a hub. In theory this bit should
> never be set unexpectedly... in practice it can still happen if BIOS,
> SMM or ACPI code plays around with USB devices without cleaning up
> correctly. This is especially dangerous for XHCI root hubs, which don't
> generate any more Port Status Change Events until all change bits are
> cleared, so this is a good precaution to have (similar to how it's
> already done for the Warm Port Reset Change flag).
>
> Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
> ---
> drivers/usb/core/hub.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index e6b682c..c3dd64c 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1130,6 +1130,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
> usb_clear_port_feature(hub->hdev, port1,
> USB_PORT_FEAT_C_ENABLE);
> }
> + if (portchange & USB_PORT_STAT_C_RESET) {
> + need_debounce_delay = true;
> + usb_clear_port_feature(hub->hdev, port1,
> + USB_PORT_FEAT_C_RESET);
> + }
> if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
> hub_is_superspeed(hub->hdev)) {
> need_debounce_delay = true;

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/