Re: [Resend PATCH 5/5] IA64/PCI/ACPI: Rework PCI root bridge ACPIresource conversion

From: Bjorn Helgaas
Date: Wed Oct 23 2013 - 18:39:18 EST


[+cc Greg]

On Fri, Oct 18, 2013 at 08:44:12PM +0800, Lan Tianyu wrote:
> On 10/18/2013 04:33 AM, Bjorn Helgaas wrote:
>> On Thu, Oct 17, 2013 at 12:09 AM, Lan Tianyu <tianyu.lan@xxxxxxxxx> wrote:
>>>On 2013å10æ17æ 07:55, Bjorn Helgaas wrote:
>>>> On Fri, Oct 11, 2013 at 08:19:01PM +0800, tianyu.lan@xxxxxxxxx wrote:

>>I wonder if it would make sense to make
>>acpi_dev_resource_address_space() ignore addr.translation_offset for
>>IO resources. Or maybe ignore it if the _TTP (type translation) bit
>>is set?
>
> I wonder why current code doesn't check _TTP? The code in the
> add_io_space() seems to think _TTP is always set, right?

I think it's an oversight, and you should fix it. I suggest that you
ignore the _TRA value when _TTP is set. Obviously this only applies
to I/O port resources, since _TTP is only defined in the I/O Resource
Flag (Table 6-185 in ACPI 5.0 spec).

>>Mike, is there any chance you could collect an acpidump from an
>>rx7620 or similar ia64 system? In particular, I want to see a
>>multi-node system where we have several PCI domains, and whether it
>>sets the _TTP bits.

Greg collected an acpidump from an HP system that uses these I/O port
ranges. ÂUnfortunately the system wasn't running Linux, so it's an EFI
dump, not the usual one we get from the "pmtools" package. But I
think it has the information we want.

It's huge, and I put some of the relevant parts of it here:
https://bugzilla.kernel.org/show_bug.cgi?id=63581 Here's a sample
that shows the _TTP bit is set for the I/O aperture:

Device E000 (\_SB_.N000.E000)
Name _SEG (\_SB_.N000.E000._SEG)
0x01
Name _CRS (\_SB_.N000.E001._CRS)
Buffer
0x0092
ByteList <0x88 0x0d 0x00 0x02 0x0e 0x00 0x00 0x00
0x00 0x00 0xff 0x00 0x00 0x00 0x00 0x01

0x8a 0x2b 0x00 0x01 0x0c 0x33 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0xd0 0x00 0x04 0x00 0x00 0x00 0x00
0x01 0x00 0x00 0x00 0x00 0x00

Byte 0: 0x8a (QWORD address space descriptor)
Byte 3: Resource Type = 0x01 (I/O range)
Byte 5: Type Specific Flags = 0x33 (_TRS, _TTP, _RNG = 3)

QWORD Address Space Descriptor:
Type: I/O
Flags: Sparse, Translate, ISA I/O addresses, Non-ISA I/O addresses
GRA: 0x0000000000000000
MIN: 0x0000000000000000 MAX: 0x000000000000ffff
TRA: 0x00000400d0000000 LEN: 0x0000000000010000
MAX address fixed
MIN address fixed
Address positively decoded
Device produces and consumes this resource

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/