Re: [PATCH 00/10] leds: lp5521,5523: restore device attributes for running LED patterns

[Pali RohÃr]

On Tuesday 13 August 2013 23:04:14 Bryan Wu wrote:
> On Thu, Aug 8, 2013 at 12:59 AM, Milo Kim <woogyom.kim@xxxxxxxxx> wrote:
> > This patch-set resolves the application conflict by
> > restoring sysfs files.
> > 
> > For LP5521
> > 
> >   engine1/2/3_mode
> >   engine1/2/3_load
> > 
> > For LP5523
> > 
> >   engine1/2/3_mode
> >   engine1/2/3_load
> >   engine1/2/3_leds
> > 
> > Those attributes are accessed when LED pattern is run by
> > custom application. Those were removed when LED pattern
> > interface was changed to generic firmware interface. Please
> > refer to commits below.
> > 
> >   git commit 9ce7cb170f97f83a78dc948bf7d25690f15e1328
> >   (leds-lp5521: use generic firmware interface)
> >   
> >   git commit db6eaf8388a413a5ee1b4547ce78506b9c6456b0
> >   (leds-lp5523: use generic firmware interface)
> > 
> > Necessary attributes are restored in this patch-set.
> > 
> > (Other changes)
> > New data structure is added for handling values from/to an
> > application. Few code fixes for reducing writing I2C
> > commands.
> > Add LP55xx common macros for code refactoring.
> > Documentation updates.
> > 
> > You can also pull from the location below
> > This branch is based on 'for-next' of linux-leds.
> > 
> >   https://github.com/milokim/lp55xx.git
> >   resolve-missing-sysfs
> 
> Thanks, I've already merged the whole patchset in my -devel
> branch [1].
> 
> Pali, could you please help to test it on your hardware? Just
> grab my -devel branch and build then run.
> 
> Thanks,
> -Bryan
> 

Hi, I see that all your patches are part of 3.12-rc5 kernel.

Now I tested this example led program:

    # Clearing LED-state to be sure
    echo "disabled" > /sys/class/i2c-adapter/i2c-2/2-0032/engine1_mode
    echo "disabled" > /sys/class/i2c-adapter/i2c-2/2-0032/engine2_mode
    echo 0 > /sys/class/leds/lp5523:r/brightness
    echo 0 > /sys/class/leds/lp5523:g/brightness
    echo 0 > /sys/class/leds/lp5523:b/brightness

    # Setting yellow light pattern and running it
    echo "load" > /sys/class/i2c-adapter/i2c-2/2-0032/engine1_mode
    echo "000001100" > /sys/class/i2c-adapter/i2c-2/2-0032/engine1_leds
    echo "9d804000427f0d7f7f007f0042000000" > /sys/class/i2c-adapter/i2c-2/2-0032/engine1_load
    echo "load" > /sys/class/i2c-adapter/i2c-2/2-0032/engine2_mode
    echo "000000000" > /sys/class/i2c-adapter/i2c-2/2-0032/engine2_leds
    echo "9d800000" > /sys/class/i2c-adapter/i2c-2/2-0032/engine2_load
    echo "run" > /sys/class/i2c-adapter/i2c-2/2-0032/engine2_mode
    echo "run" > /sys/class/i2c-adapter/i2c-2/2-0032/engine1_mode
    echo 20 > /sys/class/leds/lp5523:r/led_current
    echo 2 > /sys/class/leds/lp5523:g/led_current
    echo 0 > /sys/class/leds/lp5523:b/led_current

All sysfs entries exists and every echo returned 0.

But led does not start blinking that yellow ligh pattern.
So it not working on 3.12-rc5 kernel :-(

-- 
Pali RohÃr
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.