Re: [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver

From: Santosh Shilimkar
Date: Tue Nov 12 2013 - 11:09:24 EST

+ Greg KH (drivers/memory/* patches goes through his queue)

On Monday 11 November 2013 12:06 PM, Khoronzhuk, Ivan wrote:
> Add new AEMIF driver for EMIF16 davinci controller. The EMIF16 module
> is intended to provide a glue-less interface to a variety of
> asynchronous memory devices like ASRA M, NOR and NAND memory. A total
> of 256M bytes of any of these memories can be accessed at any given
> time via four chip selects with 64M byte access per chip select.
>
> Synchronous memories such as DDR1 SD RAM, SDR SDRAM and Mobile SDR
> are not supported.
>
> See http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
> ---
> drivers/memory/Kconfig | 11 ++
> drivers/memory/Makefile | 1 +
> drivers/memory/davinci-aemif.c | 415 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 427 insertions(+)
> create mode 100644 drivers/memory/davinci-aemif.c
>
> diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
> index 29a11db..010e75e 100644
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -7,6 +7,17 @@ menuconfig MEMORY
>
> if MEMORY
>
> +config TI_DAVINCI_AEMIF
s/TI_DAVINCI_AEMIF/TI_AEMIF

> + bool "Texas Instruments DaVinci AEMIF driver"
Drop DaVinci above since its used on more SOCs.
> + depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
> + help
> + This driver is for the AEMIF module available in Texas Instruments
> + SoCs. AEMIF stands for Asynchronous External Memory Interface and
> + is intended to provide a glue-less interface to a variety of
> + asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
> + of 256M bytes of any of these memories can be accessed at a given
> + time via four chip selects with 64M byte access per chip select.
> +
> config TI_EMIF
> tristate "Texas Instruments EMIF driver"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
> index 969d923..af14126 100644
> --- a/drivers/memory/Makefile
> +++ b/drivers/memory/Makefile
> @@ -5,6 +5,7 @@
> ifeq ($(CONFIG_DDR),y)
> obj-$(CONFIG_OF) += of_memory.o
> endif
> +obj-$(CONFIG_TI_DAVINCI_AEMIF) += davinci-aemif.o

Change this accordingly once the config is renamed.

> obj-$(CONFIG_TI_EMIF) += emif.o
> obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
> diff --git a/drivers/memory/davinci-aemif.c b/drivers/memory/davinci-aemif.c
> new file mode 100644
> index 0000000..e36b74b
> --- /dev/null
> +++ b/drivers/memory/davinci-aemif.c
> @@ -0,0 +1,415 @@
> +/*
> + * DaVinci/Keystone AEMIF driver
s/{DaVinci/Keystone}/TI
> + *
> + * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
> + * Copyright (C) Heiko Schocher <hs@xxxxxxx>
> + * Copyright (C) Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#define TA_SHIFT 2
> +#define RHOLD_SHIFT 4
> +#define RSTROBE_SHIFT 7
> +#define RSETUP_SHIFT 13
> +#define WHOLD_SHIFT 17
> +#define WSTROBE_SHIFT 20
> +#define WSETUP_SHIFT 26
> +#define EW_SHIFT 30
> +#define SS_SHIFT 31
> +
> +#define TA(x) ((x) << TA_SHIFT)
> +#define RHOLD(x) ((x) << RHOLD_SHIFT)
> +#define RSTROBE(x) ((x) << RSTROBE_SHIFT)
> +#define RSETUP(x) ((x) << RSETUP_SHIFT)
> +#define WHOLD(x) ((x) << WHOLD_SHIFT)
> +#define WSTROBE(x) ((x) << WSTROBE_SHIFT)
> +#define WSETUP(x) ((x) << WSETUP_SHIFT)
> +#define EW(x) ((x) << EW_SHIFT)
> +#define SS(x) ((x) << SS_SHIFT)
> +
> +#define ASIZE_MAX 0x1
> +#define TA_MAX 0x3
> +#define RHOLD_MAX 0x7
> +#define RSTROBE_MAX 0x3f
> +#define RSETUP_MAX 0xf
> +#define WHOLD_MAX 0x7
> +#define WSTROBE_MAX 0x3f
> +#define WSETUP_MAX 0xf
> +#define EW_MAX 0x1
> +#define SS_MAX 0x1
> +#define NUM_CS 4
> +
> +#define TA_VAL(x) (((x) & TA(TA_MAX)) >> TA_SHIFT)
> +#define RHOLD_VAL(x) (((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT)
> +#define RSTROBE_VAL(x) (((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT)
> +#define RSETUP_VAL(x) (((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT)
> +#define WHOLD_VAL(x) (((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT)
> +#define WSTROBE_VAL(x) (((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
> +#define WSETUP_VAL(x) (((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
> +#define EW_VAL(x) (((x) & EW(EW_MAX)) >> EW_SHIFT)
> +#define SS_VAL(x) (((x) & SS(SS_MAX)) >> SS_SHIFT)
> +
> +#define NRCSR_OFFSET 0x00
> +#define AWCCR_OFFSET 0x04
> +#define A1CR_OFFSET 0x10
> +
> +#define ACR_ASIZE_MASK 0x3
> +#define ACR_EW_MASK BIT(30)
> +#define ACR_SS_MASK BIT(31)
> +#define ASIZE_16BIT 1
> +
> +#define CONFIG_MASK (TA(TA_MAX) | \
> + RHOLD(RHOLD_MAX) | \
> + RSTROBE(RSTROBE_MAX) | \
> + RSETUP(RSETUP_MAX) | \
> + WHOLD(WHOLD_MAX) | \
> + WSTROBE(WSTROBE_MAX) | \
> + WSETUP(WSETUP_MAX) | \
> + EW(EW_MAX) | SS(SS_MAX) | \
> + ASIZE_MAX)
> +
> +#define DRV_NAME "davinci-aemif"
s/davinci-aemif/ti-aemif
> +
> +/**
> + * structure to hold cs parameters
> + * @cs: chip-select number
> + * @wstrobe: write strobe width, ns
> + * @rstrobe: read strobe width, ns
> + * @wsetup: write setup width, ns
> + * @whold: write hold width, ns
> + * @rsetup: read setup width, ns
> + * @rhold: read hold width, ns
> + * @ta: minimum turn around time, ns
> + * @enable_ss: enable/disable select strobe mode
> + * @enable_ew: enable/disable extended wait mode
> + * @asize: width of the asynchronous device's data bus
> + */
> +struct davinci_aemif_cs_data {
> + u8 cs;
> + u16 wstrobe;
> + u16 rstrobe;
> + u8 wsetup;
> + u8 whold;
> + u8 rsetup;
> + u8 rhold;
> + u8 ta;
> + u8 enable_ss;
> + u8 enable_ew;
> + u8 asize;
> +};
> +
I suggest you drop davinci prefix throughout the
driver.

[..]

> +static const struct of_device_id davinci_aemif_of_match[] = {
> + { .compatible = "ti,davinci-aemif", },
> + { .compatible = "ti,keystone-aemif", },
> + { .compatible = "ti,omap-L138-aemif", },
> + {},
> +};
Do we need three seperate compatible or "ti,aemif" should
be enough ? Are there differences which we need to handled
based on compatibles ?

> +
> +static const struct of_device_id davinci_cs_of_match[] = {
> + { .compatible = "ti,davinci-cs", },
> + {},
> +};
> +
> +static int davinci_aemif_probe(struct platform_device *pdev)
> +{
> + int ret = -ENODEV, i;
> + struct resource *res;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> +
> + if (np == NULL)
> + return 0;
> +
> + if (aemif) {
> + dev_err(dev, "davinci_aemif driver is in use currently\n");
> + return -EBUSY;
> + }
> +
> + aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
> +
Drop this extra line.

> + if (!aemif) {
> + dev_err(dev, "cannot allocate memory for aemif\n");
> + return -ENOMEM;
> + }
> +
> + aemif->clk = devm_clk_get(dev, "aemif");
> + if (IS_ERR(aemif->clk)) {
> + dev_err(dev, "cannot get clock 'aemif'\n");
> + return PTR_ERR(aemif->clk);
> + }
> +
> + clk_prepare_enable(aemif->clk);
> + aemif->clk_rate = clk_get_rate(aemif->clk) / 1000;
> +
1000 divider ? Define a marco and use it to be clear.

Other than above comments patch looks fine to me.

Regards,
Santosh

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/