Re: [PATCH] I2C: busses: Do not print error message in syslog if noACK received

[Andreas Werner]

On Tue, Nov 12, 2013 at 07:00:59PM +0100, Marek Vasut wrote:
> Dear Andreas Werner,
> 
> > Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
> > the driver will print a lot of error messages if there was no ACK
> > received.
> > 
> > i2cdetect normally print a table with all the available devices. If there
> > is no device on the address, the table will be empty.
> > Currently with the i2c-eg20t driver, the table is not visible because
> > the error messages destroy the table.
> > 
> > Error message: pch_i2c_getack return -71
> > 
> > This patch prevent the driver to print the messages to syslog if debug is
> > not set.
> > 
> > Tested on Intel Atom E6xx and Eg20t Chipset.
> > 
> > Signed-off-by: Andreas Werner <wernerandy@xxxxxx>
> > ---
> >  drivers/i2c/busses/i2c-eg20t.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-eg20t.c
> > b/drivers/i2c/busses/i2c-eg20t.c index 0f37529..b10c651 100644
> > --- a/drivers/i2c/busses/i2c-eg20t.c
> > +++ b/drivers/i2c/busses/i2c-eg20t.c
> > @@ -322,7 +322,7 @@ static s32 pch_i2c_getack(struct i2c_algo_pch_data
> > *adap) reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK;
> > 
> >  	if (reg_val != 0) {
> > -		pch_err(adap, "return%d\n", -EPROTO);
> > +		pch_dbg(adap, "return%d\n", -EPROTO);
> >  		return -EPROTO;
> >  	}
> 
> I'd just kill the pch_err() line altogether:
  But why? I think there a few pch_err message which are interesting to have in syslog,
  without building the dbg driver.
> 
> if (reg_val)
> 	return -EPROTO;
> 
> That is because if you look at the only caller of this function, which is 
> pch_i2c_wait_for_check_xfer(), you will see that at the only place where 
> pch_i2c_getack() is called there is already pch_dbg():
> 
> 369         if (pch_i2c_getack(adap)) {
> 370                 pch_dbg(adap, "Receive NACK for slave address"
> 371                         "setting\n");
> 372                 return -EIO;
> 373         }
> 
> btw. (idea for subsequent patch) this pch_dbg() should be fixed to be a one-
> liner /wrt the text so we can grep for the error messages. Such text arg should 
> never be split in multiple lines in kernel.
  Ok i will wait a few days for further comments to this patch and then
  i will resend the patch with a one liner message.
> 
> Best regards,
> Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/