Re: [PATCH 1/2] ARM: dts: imx: specify the value of audmux pinctrlinstead of 0x80000000

From: Nicolin Chen
Date: Fri Nov 15 2013 - 01:49:55 EST


On Fri, Nov 15, 2013 at 02:42:01PM +0800, Shawn Guo wrote:
> On Thu, Nov 14, 2013 at 07:07:09PM +0800, Nicolin Chen wrote:
> > We must specify the value of audmux pinctrl if we want to use pinctrl_pm().
> > Thus change bypass value 0x80000000 to what we exactly need.
> >
> > This patch also seperately unset PUE bit for TXD so that IOMUX won't pull
> > up/down the pin after turning into tristate. When we use SSI normal mode to
> > playback monaural audio via I2S signal, there'd be a pulled curve occur to
> > its signal at the second slot if setting PUE bit for TXD. And it will make
> > the second channel to play a constant noise. So by keeping the signal level
> > in the second slot, we can get a constant high level signal (-1) or a low
> > level one (0).
> >
> > Signed-off-by: Nicolin Chen <b42378@xxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++-----------
> > 1 file changed, 11 insertions(+), 11 deletions(-)
>
> We have moved all pin groups settings into
> arch/arm/boot/dts/imx6qdl-pingrp.h. I just rebased and applied the
> patch. Please check my imx/dt branch and ensure I applied the changes
> correctly.

Simply perfect. Thank you.
Nicolin

---


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/