Re: [PATCH] Allow MUSB DSPS to use "force host" mode

[Mark Jackson]

On 22/11/13 16:33, Sebastian Andrzej Siewior wrote:
> On 11/22/2013 04:55 PM, Mark Jackson wrote:
>> The IDDIG input pin is normally used to determine the USB mode
>> (i.e. HOST or DEVICE).
>>
>> On some systems (e.g. AM335x) leaving this pin floating allows
>> the USB mode to be set via software.
> 
> So you have a board where musb is used only as host or only as device
> and the ID pin not on ground or 3.3V?
> What are the side effects? I remember correctly Bin wanted to avoid
> settings this if it could be avoided.

Yes ... we have a host only USB port and an unconnected ID pin.

AFAIK it defaults to device mode so I can't see any devices that get
plugged into the USB port.

If I tweak the s/w to "force" host mode on, then everything appears to
work okay.

I guess it's more of a hardware oversight that we left the pin floating
but in the real world, I guess someone may want this feature to they
can change the usb port type ?

Either way, I need to fix the current h/w (which can be done via s/w)
hence the patch.

Mark J.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/