Re: [PATCH 1/1] mfd: omap-usb-host: Fix USB device detection problemson OMAP4 Panda

[Sebastian Andrzej Siewior]

- stable@xxxxxxxxxxxxxxx since they probably don't care about this
  unless the patch is merged.

On 12/02/2013 10:41 AM, Roger Quadros wrote:
> Michael,
> 
> On 11/29/2013 05:32 PM, Michael Trimarchi wrote:
>> Hi Roger
>>
>> On Fri, Nov 29, 2013 at 2:01 PM, Roger Quadros <rogerq@xxxxxx> wrote:
>>> With u-boot 2013.10, USB devices are sometimes not detected
>>> on OMAP4 Panda. To make us independent of what bootloader does
>>> with the USB Host module, we must RESET it to get it to a known
>>> good state. This patch Soft RESETs the USB Host module.
>>>
>>
>> Do you think that we need something similar of usb musb?
>> I have seen the OTG_SYSCONFIG is touched in uboot and
>> only readed in omap2430.c.
> 
> I'm not sure about musb. Maybe Sebastian/Felipe have better idea.
> In general I believe that all modules must be reset by the kernel.
> 

based on the code at the bottom it touches the first few register(s)
sysconfig. Isn't hwmod actually doing this idle stuff and resting the
device during boot?

> cheers,
> -roger
>>

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/