Re: [PATCH v2 1/3] mfd: rtsx: reduce code duplication in rtl8411

[Lee Jones]

> From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
>  
> in order to remove duplicated code in rtl8411, we make 8411 as the base
> init params, and other like-8411 chips will just change the different
> value with 8411, this can save some source code.
> 
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>

I haven't signed this version off.

I'm still confused what the difference between the versions are. I
submitted a patch just like this one, which you responded to with only
a single fix. Then you've submitted a slightly different version? What
makes this version different/better?

> Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> ---
>  drivers/mfd/rtl8411.c  |   63 +++++++++---------------------------------------
>  drivers/mfd/rtsx_pcr.h |    8 ++++++
>  2 files changed, 19 insertions(+), 52 deletions(-)
> 
> diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
> index 5280135..c9eab9d 100644
> --- a/drivers/mfd/rtl8411.c
> +++ b/drivers/mfd/rtl8411.c
> @@ -279,7 +279,7 @@ static int rtl8411_conv_clk_and_div_n(int input, int dir)
>  	return output;
>  }
>  
> -static const struct pcr_ops rtl8411_pcr_ops = {
> +static struct pcr_ops rtl8411_pcr_ops = {
>  	.fetch_vendor_settings = rtl8411_fetch_vendor_settings,
>  	.extra_init_hw = rtl8411_extra_init_hw,
>  	.optimize_phy = NULL,
> @@ -295,22 +295,6 @@ static const struct pcr_ops rtl8411_pcr_ops = {
>  	.force_power_down = rtl8411_force_power_down,
>  };
>  
> -static const struct pcr_ops rtl8411b_pcr_ops = {
> -	.fetch_vendor_settings = rtl8411b_fetch_vendor_settings,
> -	.extra_init_hw = rtl8411b_extra_init_hw,
> -	.optimize_phy = NULL,
> -	.turn_on_led = rtl8411_turn_on_led,
> -	.turn_off_led = rtl8411_turn_off_led,
> -	.enable_auto_blink = rtl8411_enable_auto_blink,
> -	.disable_auto_blink = rtl8411_disable_auto_blink,
> -	.card_power_on = rtl8411_card_power_on,
> -	.card_power_off = rtl8411_card_power_off,
> -	.switch_output_voltage = rtl8411_switch_output_voltage,
> -	.cd_deglitch = rtl8411_cd_deglitch,
> -	.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
> -	.force_power_down = rtl8411_force_power_down,
> -};
> -
>  /* SD Pull Control Enable:
>   *     SD_DAT[3:0] ==> pull up
>   *     SD_CD       ==> pull up
> @@ -456,45 +440,20 @@ void rtl8411_init_params(struct rtsx_pcr *pcr)
>  	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
>  
>  	pcr->ic_version = rtl8411_get_ic_version(pcr);
> -	pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
> -	pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
> -	pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
> -	pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
> +
> +	set_pull_ctrl_tables(rtl8411);
>  }
>  
>  void rtl8411b_init_params(struct rtsx_pcr *pcr)
>  {
> -	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
> -	pcr->num_slots = 2;
> -	pcr->ops = &rtl8411b_pcr_ops;
> -
> -	pcr->flags = 0;
> -	pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
> -	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
> -	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
> -	pcr->aspm_en = ASPM_L1_EN;
> -	pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
> -	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
> +	rtl8411_init_params(pcr);
>  
> -	pcr->ic_version = rtl8411_get_ic_version(pcr);
> +	rtl8411_pcr_ops.fetch_vendor_settings =
> +		rtl8411b_fetch_vendor_settings;
> +	rtl8411_pcr_ops.extra_init_hw = rtl8411b_extra_init_hw;
>  
> -	if (rtl8411b_is_qfn48(pcr)) {
> -		pcr->sd_pull_ctl_enable_tbl =
> -			rtl8411b_qfn48_sd_pull_ctl_enable_tbl;
> -		pcr->sd_pull_ctl_disable_tbl =
> -			rtl8411b_qfn48_sd_pull_ctl_disable_tbl;
> -		pcr->ms_pull_ctl_enable_tbl =
> -			rtl8411b_qfn48_ms_pull_ctl_enable_tbl;
> -		pcr->ms_pull_ctl_disable_tbl =
> -			rtl8411b_qfn48_ms_pull_ctl_disable_tbl;
> -	} else {
> -		pcr->sd_pull_ctl_enable_tbl =
> -			rtl8411b_qfn64_sd_pull_ctl_enable_tbl;
> -		pcr->sd_pull_ctl_disable_tbl =
> -			rtl8411b_qfn64_sd_pull_ctl_disable_tbl;
> -		pcr->ms_pull_ctl_enable_tbl =
> -			rtl8411b_qfn64_ms_pull_ctl_enable_tbl;
> -		pcr->ms_pull_ctl_disable_tbl =
> -			rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
> -	}
> +	if (rtl8411b_is_qfn48(pcr))
> +		set_pull_ctrl_tables(rtl8411b_qfn48);
> +	else
> +		set_pull_ctrl_tables(rtl8411b_qfn64);
>  }
> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> index 947e79b..26b52ec 100644
> --- a/drivers/mfd/rtsx_pcr.h
> +++ b/drivers/mfd/rtsx_pcr.h
> @@ -63,4 +63,12 @@ static inline u8 map_sd_drive(int idx)
>  #define rtl8411_reg_to_sd30_drive_sel_3v3(reg)	(((reg) >> 5) & 0x07)
>  #define rtl8411b_reg_to_sd30_drive_sel_3v3(reg)	((reg) & 0x03)
>  
> +#define set_pull_ctrl_tables(__device)				\
> +do {								\
> +	pcr->sd_pull_ctl_enable_tbl  = __device##_sd_pull_ctl_enable_tbl;  \
> +	pcr->sd_pull_ctl_disable_tbl = __device##_sd_pull_ctl_disable_tbl; \
> +	pcr->ms_pull_ctl_enable_tbl  = __device##_ms_pull_ctl_enable_tbl;  \
> +	pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
> +} while (0)
> +
>  #endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/