[PATCH 2/2] staging: octeon-usb: Probe via device tree populated platform device.
From: David Daney
Date: Tue Dec 03 2013 - 14:47:29 EST
From: David Daney <david.daney@xxxxxxxxxx>
Extract clocking parameters from the device tree, and remove now dead
code and types.
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
drivers/staging/octeon-usb/octeon-hcd.c | 273 ++++++++++++++------------------
1 file changed, 116 insertions(+), 157 deletions(-)
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index d118952..c53499a 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -275,13 +275,6 @@ enum cvmx_usb_pipe_flags {
*/
#define MAX_TRANSFER_PACKETS ((1<<10)-1)
-enum {
- USB_CLOCK_TYPE_REF_12,
- USB_CLOCK_TYPE_REF_24,
- USB_CLOCK_TYPE_REF_48,
- USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
/**
* Logical transactions may take numerous low level
* transactions, especially when splits are concerned. This
@@ -471,19 +464,6 @@ struct octeon_hcd {
/* Returns the IO address to push/pop stuff data from the FIFOs */
#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
-static int octeon_usb_get_clock_type(void)
-{
- switch (cvmx_sysinfo_get()->board_type) {
- case CVMX_BOARD_TYPE_BBGW_REF:
- case CVMX_BOARD_TYPE_LANAI2_A:
- case CVMX_BOARD_TYPE_LANAI2_U:
- case CVMX_BOARD_TYPE_LANAI2_G:
- case CVMX_BOARD_TYPE_UBNT_E100:
- return USB_CLOCK_TYPE_CRYSTAL_12;
- }
- return USB_CLOCK_TYPE_REF_48;
-}
-
/**
* Read a USB 32bit CSR. It performs the necessary address swizzle
* for 32bit CSRs and logs the value in a readable format if
@@ -582,37 +562,6 @@ static inline int __cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
return 0; /* Data0 */
}
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * struct cvmx_usb_state.
- *
- * Returns: Number of port, zero if usb isn't supported
- */
-static int cvmx_usb_get_num_ports(void)
-{
- int arch_ports = 0;
-
- if (OCTEON_IS_MODEL(OCTEON_CN56XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
- arch_ports = 2;
- else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
- arch_ports = 1;
- else
- arch_ports = 0;
-
- return arch_ports;
-}
-
/**
* Initialize a USB port for use. This must be called before any
* other access to the Octeon USB port is made. The port starts
@@ -628,41 +577,16 @@ static int cvmx_usb_get_num_ports(void)
* Returns: 0 or a negative error code.
*/
static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
- int usb_port_number)
+ int usb_port_number,
+ enum cvmx_usb_initialize_flags flags)
{
union cvmx_usbnx_clk_ctl usbn_clk_ctl;
union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
- enum cvmx_usb_initialize_flags flags = 0;
int i;
/* At first allow 0-1 for the usb port number */
if ((usb_port_number < 0) || (usb_port_number > 1))
return -EINVAL;
- /* For all chips except 52XX there is only one port */
- if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
- return -EINVAL;
- /* Try to determine clock type automatically */
- if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
- /* Only 12 MHZ crystals are supported */
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
- } else {
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-
- switch (octeon_usb_get_clock_type()) {
- case USB_CLOCK_TYPE_REF_12:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
- break;
- case USB_CLOCK_TYPE_REF_24:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
- break;
- case USB_CLOCK_TYPE_REF_48:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
- break;
- default:
- return -EINVAL;
- break;
- }
- }
memset(usb, 0, sizeof(*usb));
usb->init_flags = flags;
@@ -3431,7 +3355,6 @@ static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
return 0;
}
-
static const struct hc_driver octeon_hc_driver = {
.description = "Octeon USB",
.product_desc = "Octeon Host Controller",
@@ -3448,15 +3371,74 @@ static const struct hc_driver octeon_hc_driver = {
.hub_control = octeon_usb_hub_control,
};
-
-static int octeon_usb_driver_probe(struct device *dev)
+static int octeon_usb_probe(struct platform_device *pdev)
{
int status;
- int usb_num = to_platform_device(dev)->id;
- int irq = platform_get_irq(to_platform_device(dev), 0);
+ int initialize_flags;
+ int usb_num;
+ struct resource *res_mem;
+ struct device_node *usbn_node;
+ int irq = platform_get_irq(pdev, 0);
+ struct device *dev = &pdev->dev;
struct octeon_hcd *priv;
struct usb_hcd *hcd;
unsigned long flags;
+ u32 clock_rate = 48000000;
+ bool is_crystal_clock = false;
+ const char *clock_type;
+ int i;
+
+ if (dev->of_node == NULL) {
+ dev_err(dev, "Error: empty of_node\n");
+ return -ENXIO;
+ }
+ usbn_node = dev->of_node->parent;
+
+ i = of_property_read_u32(usbn_node,
+ "refclk-frequency", &clock_rate);
+ if (i) {
+ dev_err(dev, "No USBN \"refclk-frequency\"\n");
+ return -ENXIO;
+ }
+ switch (clock_rate) {
+ case 12000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+ break;
+ case 24000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+ break;
+ case 48000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+ break;
+ default:
+ dev_err(dev, "Illebal USBN \"refclk-frequency\" %u\n", clock_rate);
+ return -ENXIO;
+
+ }
+
+ i = of_property_read_string(usbn_node,
+ "refclk-type", &clock_type);
+
+ if (!i && strcmp("crystal", clock_type) == 0)
+ is_crystal_clock = true;
+
+ if (is_crystal_clock)
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+ else
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem == NULL) {
+ dev_err(dev, "found no memory resource\n");
+ return -ENXIO;
+ }
+ usb_num = (res_mem->start >> 44) & 1;
+
+ if (irq < 0) {
+ /* Defective device tree, but we know how to fix it. */
+ irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
+ irq = irq_create_mapping(NULL, hwirq);
+ }
/*
* Set the DMA mask to 64bits so we get buffers already translated for
@@ -3465,6 +3447,26 @@ static int octeon_usb_driver_probe(struct device *dev)
dev->coherent_dma_mask = ~0;
dev->dma_mask = &dev->coherent_dma_mask;
+ /*
+ * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+ * IOB priority registers. Under heavy network load USB
+ * hardware can be starved by the IOB causing a crash. Give
+ * it a priority boost if it has been waiting more than 400
+ * cycles to avoid this situation.
+ *
+ * Testing indicates that a cnt_val of 8192 is not sufficient,
+ * but no failures are seen with 4096. We choose a value of
+ * 400 to give a safety factor of 10.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+ union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+ pri_cnt.u64 = 0;
+ pri_cnt.s.cnt_enb = 1;
+ pri_cnt.s.cnt_val = 400;
+ cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+ }
+
hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
if (!hcd) {
dev_dbg(dev, "Failed to allocate memory for HCD\n");
@@ -3478,7 +3480,7 @@ static int octeon_usb_driver_probe(struct device *dev)
tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
INIT_LIST_HEAD(&priv->dequeue_list);
- status = cvmx_usb_initialize(&priv->usb, usb_num);
+ status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
if (status) {
dev_dbg(dev, "USB initialization failed with %d\n", status);
kfree(hcd);
@@ -3492,21 +3494,22 @@ static int octeon_usb_driver_probe(struct device *dev)
cvmx_usb_poll(&priv->usb);
spin_unlock_irqrestore(&priv->lock, flags);
- status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ status = usb_add_hcd(hcd, irq, 0);
if (status) {
dev_dbg(dev, "USB add HCD failed with %d\n", status);
kfree(hcd);
return -1;
}
- dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+ dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
return 0;
}
-static int octeon_usb_driver_remove(struct device *dev)
+static int octeon_usb_remove(struct platform_device *pdev)
{
int status;
+ struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct octeon_hcd *priv = hcd_to_octeon(hcd);
unsigned long flags;
@@ -3524,85 +3527,41 @@ static int octeon_usb_driver_remove(struct device *dev)
return 0;
}
-static struct device_driver octeon_usb_driver = {
- .name = "OcteonUSB",
- .bus = &platform_bus_type,
- .probe = octeon_usb_driver_probe,
- .remove = octeon_usb_driver_remove,
+static struct of_device_id octeon_usb_match[] = {
+ {
+ .compatible = "cavium,octeon-5750-usbc",
+ },
+ {},
};
+static struct platform_driver octeon_usb_driver = {
+ .driver = {
+ .name = "OcteonUSB",
+ .owner = THIS_MODULE,
+ .of_match_table = octeon_usb_match,
+ },
+ .probe = octeon_usb_probe,
+ .remove = octeon_usb_remove,
+};
-#define MAX_USB_PORTS 10
-static struct platform_device *pdev_glob[MAX_USB_PORTS];
-static int octeon_usb_registered;
-static int __init octeon_usb_module_init(void)
+static int __init octeon_usb_driver_init(void)
{
- int num_devices = cvmx_usb_get_num_ports();
- int device;
-
- if (usb_disabled() || num_devices == 0)
- return -ENODEV;
-
- if (driver_register(&octeon_usb_driver))
- return -ENOMEM;
-
- octeon_usb_registered = 1;
-
- /*
- * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
- * IOB priority registers. Under heavy network load USB
- * hardware can be starved by the IOB causing a crash. Give
- * it a priority boost if it has been waiting more than 400
- * cycles to avoid this situation.
- *
- * Testing indicates that a cnt_val of 8192 is not sufficient,
- * but no failures are seen with 4096. We choose a value of
- * 400 to give a safety factor of 10.
- */
- if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
- union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
-
- pri_cnt.u64 = 0;
- pri_cnt.s.cnt_enb = 1;
- pri_cnt.s.cnt_val = 400;
- cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
- }
-
- for (device = 0; device < num_devices; device++) {
- struct resource irq_resource;
- struct platform_device *pdev;
- memset(&irq_resource, 0, sizeof(irq_resource));
- irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
- irq_resource.end = irq_resource.start;
- irq_resource.flags = IORESOURCE_IRQ;
- pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
- if (IS_ERR(pdev)) {
- driver_unregister(&octeon_usb_driver);
- octeon_usb_registered = 0;
- return PTR_ERR(pdev);
- }
- if (device < MAX_USB_PORTS)
- pdev_glob[device] = pdev;
+ if (usb_disabled())
+ return 0;
- }
- return 0;
+ return platform_driver_register(&octeon_usb_driver);
}
+module_init(octeon_usb_driver_init);
-static void __exit octeon_usb_module_cleanup(void)
+static void __exit octeon_usb_driver_exit(void)
{
- int i;
+ if (usb_disabled())
+ return;
- for (i = 0; i < MAX_USB_PORTS; i++)
- if (pdev_glob[i]) {
- platform_device_unregister(pdev_glob[i]);
- pdev_glob[i] = NULL;
- }
- if (octeon_usb_registered)
- driver_unregister(&octeon_usb_driver);
+ platform_driver_unregister(&octeon_usb_driver);
}
+module_exit(octeon_usb_driver_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium Networks <support@xxxxxxxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
-module_init(octeon_usb_module_init);
-module_exit(octeon_usb_module_cleanup);
+MODULE_AUTHOR("Cavium, Inc. <support@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/