Re: [PATCH 1/3] mfd: Add realtek USB card reader driver

[Dan Carpenter]

On Wed, Jan 08, 2014 at 03:56:05PM +0800, Roger Tseng wrote:
> Hi Dan,
> 
> >> +int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr,
> >> +             u8 mask, u8 data)
> >> +{
> >> +     u16 value = 0, index = 0;
> >> +
> >> +     value |= (u16)(3 & 0x03) << 14;
> >> +     value |= (u16)(addr & 0x3FFF);
> >
> >Don't do pointless things:
> >
> >        value |= 0x03 << 14;
> >        value |= addr & 0x3FFF;
> >
> >> +     value = ((value << 8) & 0xFF00) | ((value >> 8) & 0x00FF);
> >
> >This is an endian conversion?  It is buggy.  Use the kernel endian
> >conversion functions cpu_to_le16().
> 
> This is not a conversion for endianess with respect to CPU but for
> command format  of the device. It should always be performed
> regardless of platform.
> 
> In other words, it could be equivalent to:
>         value |= 0x03 << 6; // lower byte
>         value |= (addr & 0x3F00) >> 8; // lower byte
>         value |= (addr & 0xFF) << 8; //higher byte
> 
> We think the previous form is easier to read. Should we keep it or
> change to the later one?

To me it's really weird that the standard would specify that the address
is in byte swapped reversed CPU-endian order.  But if that's what it
says then I don't care about formatting details.  The original code is
fine.

regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/