Re: [PATCH v4 0/5] USB Host support for OMAP5 uEVM (for 3.14)

[Michele Paolino]

On 09/01/2014 12:08, Roger Quadros wrote:
> Hi Michele,
>
> Did you enable CONFIG_USB_EHCI_HCD_OMAP in the kernel config?
> It is not enabled by default in omap2plus_defconfig.
Indeed it works.  Thank you!

> cheers,
> -roger
>
> On 01/09/2014 04:34 PM, Michele Paolino wrote:
> > Hello Roger,
> >
> > I'm testing your patch on an OMAP5430 EVM board. The ethernet is not working in my case. The kernel I'm using is (Tero Kristo's repo - branch 3.13-rc7-dt-clks-v13). Is there something that I'm missing?
> >
> > Here below you can find more info about my configuration:
> >
> > boot error messages:
> > eth0: ERROR while getting interface flags: No such device
> > SIOCSIFADDR: No such device
> > eth0: ERROR while getting interface flags: No such device
> > SIOCADDRT: Network is unreachable
> >
> > root@OMAP5:~# /usr/lib/klibc/bin/ipconfig eth0
> > ipconfig: eth0: SIOCGIFINDEX: No such device
> > /usr/lib/klibc/bin/ipconfig: no devices to configure
> >
> > root@OMAP5:~# uname -a
> > Linux OMAP5 3.13.0-rc7-g2a4526d-dirty #0 SMP Wed Jan 8 10:41:48 CET 2014x
> >
> > root@OMAP5:~# dmesg | grep eth
> > [    1.661434] usbcore: registered new interface driver cdc_ether
> >
> > Regards,
> >
> >
> > On 08/01/2014 07:15, Roger Quadros wrote:
> > > Hi Benoit & Tony,
> > >
> > > This patchset brings up USB Host ports and Ethernet port on
> > > the OMAP5 uEVM board.
> > >
> > > It depends on the TI Clock DT conversion patches [1] and is based
> > > on 3.13-rc7
> > >
> > > [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
> > >
> > > Changelog:
> > >
> > > v4:
> > > - Updated DT binding document for clock binding
> > >
> > > v3:
> > > - Rebased on top of 3.13-rc7
> > >
> > > cheers,
> > > -roger
> > >
> > > Roger Quadros (5):
> > >    mfd: omap-usb-host: Update DT clock binding information
> > >    ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module
> > >    ARM: dts: omap4-panda: Provide USB PHY clock
> > >    ARM: dts: omap5-uevm: Provide USB PHY clock
> > >    ARM: OMAP2+: Remove legacy_init_ehci_clk()
> > >
> > >   Documentation/devicetree/bindings/mfd/omap-usb-host.txt |  4 ++++
> > >   arch/arm/boot/dts/omap4-panda-common.dtsi               |  8 ++------
> > >   arch/arm/boot/dts/omap5-uevm.dts                        |  8 ++------
> > >   arch/arm/boot/dts/omap5.dtsi                            |  2 ++
> > >   arch/arm/mach-omap2/pdata-quirks.c                      | 16 ----------------
> > >   5 files changed, 10 insertions(+), 28 deletions(-)
> >
> > --
> > *Michele Paolino*, Virtualization R&D Engineer
> > Virtual Open Systems
> > /Open Source  KVM  Virtualization  Developments/
> > /Multicore Systems Virtualization Porting Services/
> > Web/:/ www.virtualopensystems. <http://www.virtualopensystems.com/>com <http://www.virtualopensystems.com/>
--
Michele Paolino, Virtualization R&D Engineer
Virtual Open Systems
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/