[PATCH 23/27] clocksource: sh_cmt: Add DT support
From: Laurent Pinchart
Date: Thu Feb 13 2014 - 20:01:35 EST
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/timer/renesas,cmt.txt | 75 +++++++++++++++
drivers/clocksource/sh_cmt.c | 104 +++++++++++++++++----
2 files changed, 160 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/renesas,cmt.txt
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
new file mode 100644
index 0000000..28d4ab5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -0,0 +1,75 @@
+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hadware resources but their counter and compare match value are
+independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channels indices start from 0 and are
+consecutive.
+
+Required Properties:
+
+ - compatible: must contain one of the following.
+ - "renesas,cmt-32" for the 32-bit CMT
+ (CMT0 on sh7372, sh73a0 and r8a7740)
+ - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+ (CMT[234] on sh7372, sh73a0 and r8a7740)
+ - "renasas,cmt-48" for the 48-bit CMT
+ (CMT1 on sh7372, sh73a0 and r8a7740)
+ - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+ (CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+ - reg: base address and length of the registers block for the timer module.
+ - interrupt-parent, interrupts: interrupt-specifier for the timer, one per
+ channel.
+ - clocks: phandle and clock-specifier pair for the functional clock.
+ - clock-names: must be "fck".
+
+ - #address-cells: must be 1
+ - #size-cells: must be 0
+
+ - renesas,channels-mask: integer bitmask of the channels implemented by the
+ timer instance.
+
+
+Each channel is described by a sub-node named "channel@<idx>", where <idx> is
+the channel index.
+
+Channels Required Properties:
+
+ - reg: the channel index.
+
+Channels Optional Properties:
+
+ - clock-source-rating: rating of the timer as a clock source device.
+ - clock-event-rating: rating of the timer as a clock event device.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+ CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+ them channels 0 and 1 in the documentation.
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ renesas,channels-mask = <0x60>;
+
+ channel@0 {
+ reg = <0>;
+ clock-event-rating = <80>;
+ };
+ channel@0 {
+ reg = <0>;
+ clock-source-rating = <80>;
+ };
+ };
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index fe9694b..8e46c40 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -24,6 +24,7 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -918,10 +919,72 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
return 0;
}
+static const struct platform_device_id sh_cmt_id_table[] = {
+ { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
+ { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
+ { "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
+ { "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
+ { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
+
+static const struct of_device_id sh_cmt_of_table[] = {
+ { .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] },
+ { .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] },
+ { .compatible = "renasas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] },
+ { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
+
+static struct sh_timer_channel_config *
+sh_cmt_parse_dt(struct sh_cmt_device *cmt)
+{
+ struct sh_timer_channel_config *channels;
+ struct sh_timer_channel_config *channel;
+ struct device_node *np = cmt->pdev->dev.of_node;
+ struct device_node *child;
+ int ret;
+
+ cmt->num_channels = of_get_child_count(np);
+ if (cmt->num_channels == 0)
+ return ERR_PTR(-EINVAL);
+
+ ret = of_property_read_u32(np, "renesas,channels-mask",
+ &cmt->hw_channels);
+ if (ret < 0)
+ return ERR_PTR(-EINVAL);
+
+ channels = devm_kzalloc(&cmt->pdev->dev, sizeof(*channels), GFP_KERNEL);
+ if (channels == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ channel = channels;
+
+ for_each_child_of_node(np, child) {
+ u32 val;
+
+ ret = of_property_read_u32(child, "reg", &channel->index);
+ if (ret < 0)
+ return ERR_PTR(-EINVAL);
+
+ ret = of_property_read_u32(child, "clock-source-rating", &val);
+ if (ret == 0)
+ channel->clocksource_rating = val;
+ ret = of_property_read_u32(child, "clock-event-rating", &val);
+ if (ret == 0)
+ channel->clockevent_rating = val;
+
+ channel++;
+ }
+
+ return channels;
+}
+
static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
{
- struct sh_timer_config *cfg = pdev->dev.platform_data;
- const struct platform_device_id *id = pdev->id_entry;
+ const struct sh_timer_channel_config *ch_cfg;
unsigned int mask;
unsigned int i;
int ret;
@@ -929,13 +992,28 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
memset(cmt, 0, sizeof(*cmt));
cmt->pdev = pdev;
- if (!cfg) {
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ const struct of_device_id *id;
+
+ id = of_match_node(sh_cmt_of_table, pdev->dev.of_node);
+ cmt->info = id->data;
+
+ ch_cfg = sh_cmt_parse_dt(cmt);
+ if (IS_ERR(ch_cfg))
+ return PTR_ERR(ch_cfg);
+ } else if (pdev->dev.platform_data) {
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ const struct platform_device_id *id = pdev->id_entry;
+
+ cmt->info = (const struct sh_cmt_info *)id->driver_data;
+ cmt->num_channels = cfg->num_channels;
+ cmt->hw_channels = ~cfg->channels_mask;
+ ch_cfg = cfg->channels;
+ } else {
dev_err(&cmt->pdev->dev, "missing platform data\n");
return -ENXIO;
}
- cmt->info = (const struct sh_cmt_info *)id->driver_data;
-
/* Get hold of clock. */
cmt->clk = clk_get(&cmt->pdev->dev, NULL);
if (IS_ERR(cmt->clk)) {
@@ -953,9 +1031,6 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
goto err_clk_unprepare;
/* Allocate and setup the channels. */
- cmt->num_channels = cfg->num_channels;
- cmt->hw_channels = ~cfg->channels_mask;
-
cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels),
GFP_KERNEL);
if (cmt->channels == NULL) {
@@ -966,7 +1041,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {
unsigned int hwidx = ffs(mask) - 1;
- ret = sh_cmt_setup_channel(&cmt->channels[i], &cfg->channels[i],
+ ret = sh_cmt_setup_channel(&cmt->channels[i], &ch_cfg[i],
hwidx, cmt);
if (ret < 0)
goto err_unmap;
@@ -1032,21 +1107,12 @@ static int sh_cmt_remove(struct platform_device *pdev)
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
-static const struct platform_device_id sh_cmt_id_table[] = {
- { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
- { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
- { "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
- { "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
- { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
- { }
-};
-MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
-
static struct platform_driver sh_cmt_device_driver = {
.probe = sh_cmt_probe,
.remove = sh_cmt_remove,
.driver = {
.name = "sh_cmt",
+ .of_match_table = of_match_ptr(sh_cmt_of_table),
},
.id_table = sh_cmt_id_table,
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/