linux-next: manual merge of the staging tree with the arm-soc tree

From: Stephen Rothwell
Date: Tue Feb 25 2014 - 01:11:16 EST

Hi Greg,

Today's linux-next merge of the staging tree got a conflict in
arch/arm/boot/dts/imx53-qsb.dts between commit d5eb195f26fa ("ARM: dts:
i.MX53: move common QSB nodes to new file") from the arm-soc tree and
commit 17b5001b5143 ("imx-drm: convert to componentised device support")
from the staging tree.

I fixed it up (see at bottom) and can carry the fix as necessary (no
action is required). I also added the following fix up patch:

From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Date: Tue, 25 Feb 2014 17:07:01 +1100
Subject: [PATCH] ARM: dts: i.MX53: merge fix patch

Signed-off-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 2dca98b79f48..5dd37c7c38b8 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -17,7 +17,7 @@
reg = <0x70000000 0x40000000>;
};

- display@di0 {
+ display0: display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb565";
--
1.9.0

--
Cheers,
Stephen Rothwell sfr@xxxxxxxxxxxxxxxx

diff --cc arch/arm/boot/dts/imx53-qsb.dts
index dec4b073ceb1,3cb4f7791a91..000000000000
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@@ -16,6 -16,182 +16,11 @@@
/ {
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
-
- memory {
- reg = <0x70000000 0x40000000>;
- };
-
- display0: display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp0_1>;
- status = "disabled";
- display-timings {
- claawvga {
- native-mode;
- clock-frequency = <27000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <60>;
- vback-porch = <10>;
- vfront-porch = <10>;
- hsync-len = <20>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power Button";
- gpios = <&gpio1 8 0>;
- linux,code = <116>; /* KEY_POWER */
- };
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio2 14 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
- gpio-key,wakeup;
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio2 15 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
- gpio-key,wakeup;
- };
- };
-
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ crtcs = <&ipu 0>;
+ connectors = <&display0>;
+ };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio7_7>;
-
- user {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
- reg_usb_vbus: usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx53-qsb-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-qsb-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- status = "okay";
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- bus-width = <8>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
- MX53_PAD_GPIO_8__GPIO1_8 0x80000000
- MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
- MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
- MX53_PAD_GPIO_16__GPIO7_11 0x80000000
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <&reg_3p2v>;
- VDDIO-supply = <&reg_3p2v>;
- clocks = <&clks 150>;
- };
};

&i2c1 {

Attachment: pgp3HW6U4DTPg.pgp
Description: PGP signature