[PATCH 7/7] ARM: at91/dt: sama5d3: remove useless adc properties

[Alexandre Belloni]

Remove the properties that are not used anymore by the at91_adc driver.

Also, stop using unit-addresses for the triggers as suggested by Mark
Rutland in
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/sama5d3.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 26d7ed510c96..46f610a09b38 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -261,35 +261,30 @@
 				clocks = <&adc_clk>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-channel-base = <0x50>;
 				atmel,adc-channels-used = <0xfff>;
-				atmel,adc-drdy-mask = <0x1000000>;
-				atmel,adc-num-channels = <12>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-status-register = <0x30>;
-				atmel,adc-trigger-register = <0xc0>;
 				atmel,adc-use-external;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <10 12>;
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
-				trigger@0 {
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/