Re: [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7

From: Roger Quadros
Date: Thu Mar 06 2014 - 09:28:37 EST


On 03/06/2014 04:22 PM, Roger Quadros wrote:
> Hi,
>
> This series adds SATA support for OMAP5 uevm and DRA7-evm boards.
>
> - Cleans up the ti-pipe3 PHY driver
> - Adds SATA DPLL support to ti-pipe3 PHY driver
> - Adds SATA nodes to hwmod and SoC DT data
>
> Patches are based on 3.14-rc4 with balbi/next, linux-phy/next and
> omap-for-v3.15/dt merged on top..
>
> To test SATA you will also need [1].
>
> [1] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285
>
> Changelog:
>
> v2
> - use 'depends on' instead of 'select' OCP2SCP bus driver.
> - Changed DT bindings for dra7-usb2 and am437-usb2 phy.
>
> cheers,
> -roger
>
> ---
> Balaji T K (2):
> ARM: dts: omap5: add sata node
> ARM: dts: dra7: add OCP2SCP3 and SATA nodes
>
> Keshava Munegowda (1):
> ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
>
> Kishon Vijay Abraham I (1):
> phy: rename struct omap_control_usb to struct omap_control_phy
>
> Nikhil Devshatwar (1):
> ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods
>
> Roger Quadros (8):
> phy: omap-control: Update DT binding information
> phy: omap-control: update dra7 and am437 usb2 bindings
> phy: ti-pipe3: cleanup clock handling
> phy: ti-pipe3: Add SATA DPLL support
> phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY
> phy: ti-pipe3: streamline PHY operations
> phy: ti-pipe3: Fix suspend/resume and module reload
> phy: omap: Depend on OMAP_OCP2SCP bus driver
>
> Documentation/devicetree/bindings/phy/ti-phy.txt | 40 ++-
> Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
> arch/arm/boot/dts/dra7.dtsi | 39 +++
> arch/arm/boot/dts/omap5.dtsi | 47 ++-
> arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 +++++
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 +-
> drivers/phy/Kconfig | 16 +-
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-omap-control.c | 320 +++++++++++++++++++++
> drivers/phy/phy-omap-usb2.c | 8 +-
> drivers/phy/phy-ti-pipe3.c | 269 ++++++++++-------
> drivers/usb/musb/omap2430.c | 2 +-
> drivers/usb/phy/Kconfig | 10 -
> drivers/usb/phy/Makefile | 1 -
> drivers/usb/phy/phy-omap-control.c | 319 --------------------
> include/linux/phy/omap_control_phy.h | 89 ++++++
> include/linux/usb/omap_control_usb.h | 89 ------
> 17 files changed, 815 insertions(+), 563 deletions(-)
> create mode 100644 drivers/phy/phy-omap-control.c
> delete mode 100644 drivers/usb/phy/phy-omap-control.c
> create mode 100644 include/linux/phy/omap_control_phy.h
> delete mode 100644 include/linux/usb/omap_control_usb.h
>
oops. forgot to add -M :(.

I'll resend just the 1st patch since it contains the file rename.
updated diffstat is below.

Documentation/devicetree/bindings/phy/ti-phy.txt | 40 ++-
Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
arch/arm/boot/dts/dra7.dtsi | 39 +++
arch/arm/boot/dts/omap5.dtsi | 47 +++-
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 ++-
drivers/phy/Kconfig | 16 +-
drivers/phy/Makefile | 1 +
drivers/{usb => }/phy/phy-omap-control.c | 169 ++++++-------
drivers/phy/phy-omap-usb2.c | 8 +-
drivers/phy/phy-ti-pipe3.c | 269 +++++++++++++--------
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/phy/Kconfig | 10 -
drivers/usb/phy/Makefile | 1 -
.../omap_control_usb.h => phy/omap_control_phy.h} | 36 +--
15 files changed, 509 insertions(+), 257 deletions(-)
rename drivers/{usb => }/phy/phy-omap-control.c (53%)
rename include/linux/{usb/omap_control_usb.h => phy/omap_control_phy.h} (68%)

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/