Re: [PATCH RFC 3/3] nand: pl353: Add driver for arm pl353 smc nand interface

[Michal Simek]

On 03/27/2014 07:21 PM, Punnaiah Choudary Kalluri wrote:
> Add driver for arm pl353 static memory controller nand interface.
> This controller is used in xilinx zynq soc for interfacing the nand
> flash memory.
> 
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> ---
>  drivers/mtd/nand/Kconfig      |    8 +
>  drivers/mtd/nand/Makefile     |    1 +
>  drivers/mtd/nand/pl353_nand.c | 1122 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 1131 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mtd/nand/pl353_nand.c
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 90ff447..31c1d0c 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -510,4 +510,12 @@ config MTD_NAND_XWAY
>  	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
>  	  to the External Bus Unit (EBU).
>  
> +config MTD_NAND_PL353
> +	tristate "ARM Pl353 NAND flash driver"
> +	depends on MTD_NAND && ARM
> +	select PL353_SMC

Here should be probably depends on PL353_SMC.
I just found it.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

Attachment: signature.asc
Description: OpenPGP digital signature