Re: [PATCH] rt2x00: Endless loop on hub port power down

From: Richard Genoud
Date: Fri Apr 04 2014 - 11:39:31 EST


2014-04-04 16:13 GMT+02:00 Stanislaw Gruszka <sgruszka@xxxxxxxxxx>:
> On Fri, Apr 04, 2014 at 11:58:26AM +0200, Richard Genoud wrote:
>> On 04/04/2014 10:04, Stanislaw Gruszka wrote:
>> > On Thu, Apr 03, 2014 at 04:48:56PM +0200, Richard Genoud wrote:
>> >> I've met an endless (or at least very long) loop if I power down the usb
>> >> port on witch a usb wifi key is plugged.
>> >> (Ok, it's not very smart to power down a usb port when a usb key is in
>> >> used... but still, I think that should not lead to an endless loop).
>> >>
>> >> I have a lot of:
>> >> ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71
>> >>
>> >> (-71==-EPROTO)
>> >>
>> >> How to reproduce:
>> >> - plug an usb wifi key
>> >> - ip link set wlan0 up
>> >> - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0
>> >>
>> >> hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c
>> >>
>> >> The following patch prevents the endless loop, but I'm really not sure
>> >> that The Right Way To Do It (R)
>> >
>> > If device disappear, we should get -ENODEV status, why we get -EPROTO ?
>>
>> I trace it down, and the EPROTO status comes from ctx.status (returned from usb_start_wait_urb() in drivers/usb/core/message.c)
>> And, in my case, the ctx.status is set to EPROTO in qtd_copy_status() ( drivers/usb/host/ehci-q.c )
>> in the code:
>> } else if (token & QTD_STS_XACT) {
>> /* timeout, bad CRC, wrong PID, etc */
>> ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
>> urb->dev->devpath,
>> usb_pipeendpoint(urb->pipe),
>> usb_pipein(urb->pipe) ? "in" : "out");
>> status = -EPROTO;
>>
>> enabling this log, I get:
>> atmel-ehci 700000.ehci: devpath 2.1 ep1in 3strikes
>> atmel-ehci 700000.ehci: devpath 2.1 ep0in 3strikes
>> atmel-ehci 700000.ehci: devpath 2.1 ep1in 3strikes
>> atmel-ehci 700000.ehci: devpath 2.1 ep0in 3strikes
>> ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71
>
> Thanks, ehci driver behaviour seems to be fine. Could you check if updating
> rt2800 firmware (I assume you have some RT2800 usb dongle) change the situation,
> i.e. we stop getting -EPROTO errors. To install new firmware, you can download
> rt2870.bin blob from:
> http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2013-January/005610.html
> and need to replace /lib/firmware/rt2870.bin file.
>
> Stanislaw
It's the same behaviour:

dmesg | grep firm
[ 13.648437] ieee80211 phy0: rt2x00lib_request_firmware: Info -
Loading firmware file 'rt2870.bin'
[ 13.656250] ieee80211 phy0: rt2x00lib_request_firmware: Info -
Firmware detected - version: 0.33
# disable_usb_port 1
# [ 31.398437] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x07 failed for offset 0x1700 with error -71
[ 31.804687] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x07 failed for offset 0x0438 with error -71
[ 32.226562] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x07 failed for offset 0x0438 with error -71
[ 32.640625] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x06 failed for offset 0x0408 with error -71
[ 33.062500] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x06 failed for offset 0x0408 with error -71
[ 33.617187] ieee80211 phy0: rt2x00usb_vendor_request: Error -
Vendor Request 0x07 failed for offset 0x1700 with error -71
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/