[GIT PULL 8/8] ARM: SoC: late cleanups

From: Arnd Bergmann
Date: Sat Apr 05 2014 - 15:08:05 EST

Next message: Hannes Frederic Sowa: "Re: [PATCH net IPv6]: Fix maximum IPv6 address limit violation"
Previous message: Arnd Bergmann: "[GIT PULL 7/8] ARM: SoC: sh driver changes"
In reply to: Arnd Bergmann: "[GIT PULL 7/8] ARM: SoC: sh driver changes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The following changes since commit 86feafebbec2b510daf36ffbdbe10228ed890b00:

ARM: dts: use macros in clock bindings for exynos5440 (2014-02-26 09:53:31 +0900)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/cleanup2-3.15

for you to fetch changes up to 9dfbff16b422a4bac7ad309847c7bc5d65653392:

devicetree: fix newly added exynos sata bindings (2014-03-29 02:15:43 +0100)

----------------------------------------------------------------
ARM: SoC: late cleanups

These could not be part of the first cleanup branch, because they either
came too late in the cycle, or they have dependencies on other branches.
Important changes are:

* The integrator platform is almost multiplatform capable after
some reorganization (Linus Walleij)
* Minor cleanups on Zynq (Michal Simek)
* Lots of changes for Exynos and other Samsung platforms, including
further preparations for multiplatform support and the clocks bindings
are rearranged.

Conflicts:
* CONFIG_UNCOMPRESS_INCLUDE now needs debug/uncompress.h for all PLAT_SAMSUNG
platforms, which includes ARCH_EXYNOS.
* The samsung-phy binding gained support for both USB and SATA descriptions,
which we both want.
* ZYNQ now uses MFD_SYSCON, but doesn't always want ARM_GLOBAL_TIMER
* zynq_init_machine() now registers a cpufreq device (don't know why
this is needed, but it didn't come through arm-soc) and it calls
zynq_slcr_init, it needs both.

----------------------------------------------------------------
Arnd Bergmann (9):
Merge tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx into next/cleanup2
Merge branches 'samsung/cleanup', 'samsung/exynos-clk' and 'samsung/exynos-clk2' into next/cleanup3
Merge tag 'samsung-cleanup-2' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
Merge tag 'samsung-dt-2' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
Merge tag 'samsung-cleanup-3' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
Merge tag 'samsung-dt-3' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
Merge tag 'samsung-pm-2' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
Merge tag 'exynos-cleanup' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup3
devicetree: fix newly added exynos sata bindings

Chanwoo Choi (5):
ARM: dts: Add ADC's dt data to read raw data for exynos4x12
ARM: dts: Add PMU dt data to support PMU for exynos4x12
ARM: dts: Add GPS_ALIVE power domain for exynos4x12
ARM: dts: Move common dt data for interrupt combiner controller for exynos4x12
ARM: dts: Add ADC and themistor nodes for exynos4412-trats2

Heiko Stuebner (2):
ARM: SAMSUNG: use generic uncompress.h
ARM: SAMSUNG: remove all custom uncompress.h

Kukjin Kim (1):
Merge branch 'v3.15-next/cleanup-samsung-2' into v3.15-next/s2r-pm-samsung-2

Linus Walleij (5):
ARM: integrator: localize the lm.h header
ARM: integrator: localize the impd1.h header
ARM: integrator: merge platform.h to hardware.h
ARM: integrator: localize the hardware.h header
ARM: integrator: register sched_clock directly

Mark Brown (3):
ARM: dts: Remove leftover spi0 node for smdk5250
serial: s3c: Fix build of header without serial_core.h preinclusion
ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion

Michal Simek (6):
ARM: zynq: Split slcr in two parts
ARM: zynq: Map I/O memory on clkc init
ARM: zynq: Add and use zynq_slcr_read/write() helper functions
ARM: zynq: Introduce zynq_slcr_unlock()
ARM: zynq: Move of_clk_init from clock driver
ARM: zynq: Add waituart implementation

Naveen Krishna Chatradhi (1):
ARM: dts: add dt node for sss module for exynos5250/5420

Olof Johansson (2):
Merge branch 'integrator/multiplatform-base' into next/cleanup2
Merge tag 'integrator-for-v3.15-2' of git://git.kernel.org/.../linusw/linux-integrator into next/cleanup2

Sachin Kamat (9):
ARM: EXYNOS: Add support to reserve memory for MFC-v7
ARM: SAMSUNG: Introduce generic Exynos4 and 5 helpers
ARM: EXYNOS: Consolidate CPU init code
ARM: EXYNOS: Consolidate exynos4 and exynos5 machine files
ARM: EXYNOS: Add generic compatible strings
ARM: dts: Update Exynos DT files with generic compatible strings
ARM: S3C24XX: Remove invalid code from hardware.h
ARM: SAMSUNG: Remove hardware.h inclusion
ARM: EXYNOS: Remove hardware.h file

Steffen Trumtrar (3):
ARM: zynq: Move clock_init from slcr to common
ARM: zynq: Hang iomapped slcr address on device_node
ARM: zynq: Make zynq_slcr_base static

Tomasz Figa (14):
ARM: EXYNOS: Do not resume l2x0 if not enabled before suspend
ARM: SAMSUNG: Add soc_is_s3c2410() helper
ARM: SAMSUNG: Save UART DIVSLOT register based on SoC type
ARM: SAMSUNG: Use debug_ll_addr() to get UART base address
ARM: SAMSUNG: Consolidate PM debug functions
ARM: SAMSUNG: Move Samsung PM debug code into separate file
ARM: SAMSUNG: Move common save/restore helpers to separate file
ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h
ARM: EXYNOS: Fix abuse of CONFIG_PM
ARM: EXYNOS: Remove PM initcalls and useless indirection
ARM: EXYNOS: Stop using legacy Samsung PM code
ARM: EXYNOS: Allow wake-up using GIC interrupts
ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h
ARM: EXYNOS: Fix compilation error in cpuidle.c

Tushar Behera (4):
ARM: SAMSUNG: Reorganize calls to reserve memory for MFC
ARM: dts: Disable MDMA1 node for arndale-octa board
ARM: dts: Keep some essential LDOs enabled for arndale-octa board
dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock

Yuvaraj Kumar C D (1):
ARM: dts: enable ahci sata and sata phy for exynos5250

.../devicetree/bindings/ata/exynos-sata-phy.txt | 14 --
.../devicetree/bindings/ata/exynos-sata.txt | 31 ++-
.../devicetree/bindings/clock/zynq-7000.txt | 4 +-
.../devicetree/bindings/phy/samsung-phy.txt | 40 ++++
arch/arm/Kconfig.debug | 4 +-
arch/arm/boot/dts/exynos4.dtsi | 5 +
arch/arm/boot/dts/exynos4210-origen.dts | 2 +-
arch/arm/boot/dts/exynos4210-smdkv310.dts | 2 +-
arch/arm/boot/dts/exynos4210-trats.dts | 2 +-
arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +-
arch/arm/boot/dts/exynos4210.dtsi | 2 +-
arch/arm/boot/dts/exynos4212.dtsi | 15 +-
arch/arm/boot/dts/exynos4412-odroidx.dts | 2 +-
arch/arm/boot/dts/exynos4412-origen.dts | 2 +-
arch/arm/boot/dts/exynos4412-smdk4412.dts | 2 +-
arch/arm/boot/dts/exynos4412-tiny4412.dts | 2 +-
arch/arm/boot/dts/exynos4412-trats2.dts | 23 ++-
arch/arm/boot/dts/exynos4412.dtsi | 16 +-
arch/arm/boot/dts/exynos4x12.dtsi | 26 +++
arch/arm/boot/dts/exynos5250-arndale.dts | 23 ++-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 23 ++-
arch/arm/boot/dts/exynos5250-snow.dts | 2 +-
arch/arm/boot/dts/exynos5250.dtsi | 30 ++-
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 17 +-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 13 +-
arch/arm/boot/dts/exynos5440-sd5v1.dts | 2 +-
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 2 +-
arch/arm/boot/dts/exynos5440.dtsi | 2 +-
arch/arm/boot/dts/zynq-7000.dtsi | 44 ++--
arch/arm/include/debug/zynq.S | 3 +
arch/arm/mach-exynos/Kconfig | 16 +-
arch/arm/mach-exynos/Makefile | 9 +-
arch/arm/mach-exynos/common.h | 17 +-
arch/arm/mach-exynos/cpuidle.c | 3 +-
arch/arm/mach-exynos/{common.c => exynos.c} | 229 ++++++++++-----------
arch/arm/mach-exynos/include/mach/hardware.h | 18 --
arch/arm/mach-exynos/include/mach/pm-core.h | 75 -------
arch/arm/mach-exynos/mach-exynos4-dt.c | 59 ------
arch/arm/mach-exynos/mach-exynos5-dt.c | 81 --------
arch/arm/mach-exynos/mfc.h | 16 ++
arch/arm/mach-exynos/platsmp.c | 2 -
arch/arm/mach-exynos/pm.c | 172 ++++++++++++----
arch/arm/mach-exynos/regs-pmu.h | 3 +-
arch/arm/mach-exynos/sleep.S | 85 ++++++++
arch/arm/mach-integrator/core.c | 4 +-
.../{include/mach/platform.h => hardware.h} | 110 ++++------
arch/arm/mach-integrator/impd1.c | 4 +-
.../arm/mach-integrator/{include/mach => }/impd1.h | 4 -
arch/arm/mach-integrator/include/mach/hardware.h | 45 ----
arch/arm/mach-integrator/integrator_ap.c | 6 +-
arch/arm/mach-integrator/integrator_cp.c | 17 +-
arch/arm/mach-integrator/leds.c | 4 +-
arch/arm/mach-integrator/lm.c | 2 +-
arch/arm/mach-integrator/{include/mach => }/lm.h | 0
arch/arm/mach-integrator/pci_v3.c | 4 +-
arch/arm/mach-s3c24xx/include/mach/hardware.h | 14 +-
arch/arm/mach-s3c24xx/include/mach/uncompress.h | 57 -----
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 2 +
arch/arm/mach-s3c64xx/include/mach/uncompress.h | 31 ---
arch/arm/mach-s3c64xx/pm.c | 1 -
arch/arm/mach-s5p64x0/include/mach/pm-core.h | 2 +
arch/arm/mach-s5p64x0/include/mach/uncompress.h | 34 ---
arch/arm/mach-s5p64x0/pm.c | 1 -
arch/arm/mach-s5pc100/include/mach/uncompress.h | 30 ---
arch/arm/mach-s5pv210/include/mach/uncompress.h | 28 ---
arch/arm/mach-zynq/Kconfig | 2 +
arch/arm/mach-zynq/common.c | 8 +-
arch/arm/mach-zynq/common.h | 2 +-
arch/arm/mach-zynq/slcr.c | 104 ++++++++--
arch/arm/plat-samsung/Makefile | 2 +
arch/arm/plat-samsung/clock.c | 1 -
arch/arm/plat-samsung/devs.c | 2 +-
arch/arm/plat-samsung/include/plat/cpu.h | 10 +
arch/arm/plat-samsung/include/plat/mfc.h | 3 -
arch/arm/plat-samsung/include/plat/pm-common.h | 110 ++++++++++
arch/arm/plat-samsung/include/plat/pm.h | 80 +------
arch/arm/plat-samsung/include/plat/uncompress.h | 175 ----------------
arch/arm/plat-samsung/init.c | 2 -
arch/arm/plat-samsung/pm-check.c | 2 +-
arch/arm/plat-samsung/pm-common.c | 75 +++++++
arch/arm/plat-samsung/pm-debug.c | 97 +++++++++
arch/arm/plat-samsung/pm.c | 145 -------------
arch/arm/plat-samsung/s5p-dev-mfc.c | 17 +-
arch/arm/plat-samsung/s5p-dev-uart.c | 1 -
arch/arm/plat-samsung/s5p-sleep.S | 43 ----
drivers/clk/samsung/clk-exynos-audss.c | 2 +-
drivers/clk/versatile/clk-impd1.c | 6 +-
drivers/clk/zynq/clkc.c | 89 +++++---
.../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0
include/linux/clk/zynq.h | 2 +-
include/linux/serial_s3c.h | 2 +
92 files changed, 1157 insertions(+), 1369 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Hannes Frederic Sowa: "Re: [PATCH net IPv6]: Fix maximum IPv6 address limit violation"
Previous message: Arnd Bergmann: "[GIT PULL 7/8] ARM: SoC: sh driver changes"
In reply to: Arnd Bergmann: "[GIT PULL 7/8] ARM: SoC: sh driver changes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]