[PATCH 2/2] arm: dts: trats2: add SiI9234 node

[Tomasz Stanislawski]

This patch adds configuration of SiI9234 bridge to Trats2 board.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
---
 arch/arm/boot/dts/exynos4412-trats2.dts |   43 +++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 9583563d..65fd1d4 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -680,4 +680,47 @@
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
+
+	vsil: voltage-regulator-vsil {
+	        compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpl0 4 0>;
+		enable-active-high;
+		vin-supply = <&buck7_reg>;
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+		gpios = <&gpf0 4 0 &gpf0 6 0>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_mhl_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		sii9234: sii9234@39 {
+			compatible = "sil,sii9234";
+			vcc-supply = <&vsil>;
+			gpio-reset = <&gpf3 4 0>;
+			gpio-int = <&gpf3 5 0>;
+			reg = <0x39>;
+		};
+	};
+};
+
+&pinctrl_0 {
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <0>;
+	};
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/