[PATCH] ARM: i.MX6: Add OF configuration support for ksz9031
From: Hubert Chaumette
Date: Tue Apr 22 2014 - 11:49:42 EST
Adds support for ksz9031 PAD skew configuration over devicetree.
Changes since v1:
- Removed ksz9021 and ksz9031 fixup deletions from arch/arm/mach-imx/mach-imx6q.c
Signed-off-by: Hubert Chaumette <hchaumette@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/micrel.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 184 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5a8993b..df56b26 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -242,6 +242,189 @@ static int ksz9021_config_init(struct phy_device *phydev)
return 0;
}
+#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
+#define OP_DATA 1
+#define KSZ9031_PS_TO_REG 60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
+#define MII_KSZ9031RN_CLK_PAD_SKEW 8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+/* Two 5-bit fields register */
+static int ksz9031_load_clk_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ char *field1, char *field2)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 2)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2,
+ MII_KSZ9031RN_CLK_PAD_SKEW);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = (newval & 0xffe0) |
+ ((val1 / KSZ9031_PS_TO_REG) & 0x1f);
+
+ if (val2 != -2)
+ newval = (newval & 0xfc1f) |
+ (((val2 / KSZ9031_PS_TO_REG) & 0x1f) << 5);
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2,
+ MII_KSZ9031RN_CLK_PAD_SKEW, newval);
+}
+
+/* Four 4-bit fields register */
+static int ksz9031_load_data_skew_values(struct phy_device *phydev,
+ struct device_node *of_node, u16 reg,
+ char *field1, char *field2,
+ char *field3, char *field4)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int val3 = -3;
+ int val4 = -4;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field3, &val3))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field4, &val4))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 4)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = (newval & 0xfff0) |
+ (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
+
+ if (val2 != -2)
+ newval = (newval & 0xff0f) |
+ (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
+
+ if (val3 != -3)
+ newval = (newval & 0xf0ff) |
+ (((val3 / KSZ9031_PS_TO_REG) & 0xf) << 8);
+
+ if (val4 != -4)
+ newval = (newval & 0x0fff) |
+ (((val4 / KSZ9031_PS_TO_REG) & 0xf) << 12);
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+/* Two 4-bit fields register */
+static int ksz9031_load_ctrl_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ char *field1, char *field2)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 2)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = (newval & 0xfff0) |
+ (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
+
+ if (val2 != -2)
+ newval = (newval & 0xff0f) |
+ (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9031_load_clk_skew_values(phydev, of_node,
+ "rxc-skew-ps", "txc-skew-ps");
+
+ ksz9031_load_data_skew_values(phydev, of_node,
+ MII_KSZ9031RN_RX_DATA_PAD_SKEW,
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps");
+
+ ksz9031_load_data_skew_values(phydev, of_node,
+ MII_KSZ9031RN_TX_DATA_PAD_SKEW,
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps");
+
+ ksz9031_load_ctrl_skew_values(phydev, of_node,
+ "txen-skew-ps", "rxdv-skew-ps");
+ }
+ return 0;
+}
+
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
@@ -428,7 +611,7 @@ static struct phy_driver ksphy_driver[] = {
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz9031_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/