Re: [PATCH v2] i2c: add driver for Rockchip RK3xxx SoC I2C adapter

From: Heiko Stübner
Date: Tue Apr 29 2014 - 18:34:17 EST


Am Dienstag, 29. April 2014, 01:34:15 schrieb Max Schwarz:
> Driver for the native I2C adapter found in Rockchip RK3xxx SoCs.
>
> Configuration is only possible through devicetree. The driver is
> interrupt driven and supports the I2C_M_IGNORE_NAK mangling bit.
>
> Tested on the Radxa Rock board, which is based on RK3188.
>
> Signed-off-by: Max Schwarz <max.schwarz@xxxxxxxxx>
> ---
>
> changes since v1:
> - dt property names "rockchip,*" suggested by Heiko Stübner
> - fixed overly specific RK3188 comment (Heiko Stübner)
>
> The dts files needed for testing on Radxa Rock are in my tree on
>
> https://github.com/xqms/linux.git topic/i2c-rk3x-clean-v2
>
> Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 34 +
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-rk3x.c | 731
> +++++++++++++++++++++ 4 files changed, 776 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> create mode 100644 drivers/i2c/busses/i2c-rk3x.c
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt new file mode 100644
> index 0000000..19bd386
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> @@ -0,0 +1,34 @@
> +* Rockchip RK3xxx I2C controller
> +
> +This driver interfaces with the native I2C controller present in Rockchip
> +RK3xxx SoCs.
> +
> +Required properties :
> +
> + - reg : Offset and length of the register set for the device
> + - compatible : should be "rockchip,rk3x-i2c"

sorry to see it only in the second iteration, but I think the common way for
compatibles is to name it after the first device to introduce it (like
"rockchip,rk3066-i2c") and newer devices are then simply compatible with it.

> + - interrupts : interrupt number
> + - clocks : parent clock
> + - rockchip,grf : the phandle of the syscon node for the general register
> + file (GRF)
> + - rockchip,bus-index : index of the bus in the GRF

here I only want to make sure, we'll be handling the GRF in general correctly
- see other thread about rockchip-pinctrl from some minutes ago.

If the whole-grf-as-syscon case wins, the best way to declare the offset would
probably be to use the data field of rk3x_i2c_match below and introduce a
second "rockchip,rk3188-i2c" compatible for it, for example like the rockchip-
pinctrl driver does in its rockchip_pinctrl_dt_match array.


Heiko

> +
> +Optional properties :
> +
> + - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is
> used. +
> +Example:
> +
> +i2c0: i2c@2002d000 {
> + compatible = "rockchip,rk3x-i2c";
> + reg = <0x2002d000 0x1000>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rockchip,grf = <&grf>;
> + rockchip,bus-index = <0>;
> +
> + clock-names = "i2c";
> + clocks = <&cru PCLK_I2C0>;
> +};
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index c94db1c..f973632 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -663,6 +663,16 @@ config I2C_PXA_SLAVE
> is necessary for systems where the PXA may be a target on the
> I2C bus.
>
> +config I2C_RK3X
> + tristate "Rockchip RK3xxx I2C adapter"
> + depends on OF
> + help
> + Say Y here to include support for the I2C adapter in Rockchip RK3xxx
> + SoCs.
> +
> + This driver can also be built as a module. If so, the module will
> + be called i2c-rk3x.
> +
> config I2C_QUP
> tristate "Qualcomm QUP based I2C controller"
> depends on ARCH_QCOM
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 18d18ff..39b6851 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -65,6 +65,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
> obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
> obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
> obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
> +obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
> obj-$(CONFIG_I2C_QUP) += i2c-qup.o
> obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
> obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> new file mode 100644
> index 0000000..73f1eb7
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -0,0 +1,731 @@
> +/*
> + * Driver for I2C adapter in Rockchip RK3xxx SoC
> + *
> + * Max Schwarz <max.schwarz@xxxxxxxxx>
> + * based on the patches by Rockchip Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include <linux/i2c.h>
> +#include <linux/time.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/spinlock.h>
> +#include <linux/clk.h>
> +#include <linux/wait.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +
> +/* Register Map */
> +#define REG_CON 0x00 /* control register */
> +#define REG_CLKDIV 0x04 /* clock divisor register */
> +#define REG_MRXADDR 0x08 /* slave address for REGISTER_TX */
> +#define REG_MRXRADDR 0x0c /* slave register address for REGISTER_TX */
> +#define REG_MTXCNT 0x10 /* number of bytes to be transmitted */
> +#define REG_MRXCNT 0x14 /* number of bytes to be received */
> +#define REG_IEN 0x18 /* interrupt enable */
> +#define REG_IPD 0x1c /* interrupt pending */
> +#define REG_FCNT 0x20 /* finished count */
> +
> +/* Data buffer offsets */
> +#define TXBUFFER_BASE 0x100
> +#define RXBUFFER_BASE 0x200
> +
> +/* REG_CON bits */
> +#define REG_CON_EN (1 << 0)
> +enum {
> + REG_CON_MOD_TX = 0, /* transmit data */
> + REG_CON_MOD_REGISTER_TX, /* select register and restart */
> + REG_CON_MOD_RX, /* receive data */
> + REG_CON_MOD_REGISTER_RX, /* broken: transmits read addr AND writes
> + * register addr */
> +};
> +#define REG_CON_MOD(mod) ((mod) << 1)
> +#define REG_CON_MOD_MASK (3 << 1)
> +#define REG_CON_START (1 << 3)
> +#define REG_CON_STOP (1 << 4)
> +#define REG_CON_LASTACK (1 << 5) /* 1: do not send ACK after last receive
> */ +#define REG_CON_ACTACK (1 << 6) /* 1: stop if NACK is received */ +
> +/* REG_MRXADDR bits */
> +#define REG_MRXADDR_LOW (1 << 24) /* bits [7:0] of MRX[R]ADDR are valid
> */ +#define REG_MRXADDR_MID (1 << 25) /* bits [15:8] of MRX[R]ADDR are
> valid */ +#define REG_MRXADDR_HIGH (1 << 26) /* bits [23:16] of MRX[R]ADDR
> are valid */ +
> +/* REG_IEN/REG_IPD bits */
> +#define REG_INT_BTF (1 << 0) /* a byte was transmitted */
> +#define REG_INT_BRF (1 << 1) /* a byte was received */
> +#define REG_INT_MBTF (1 << 2) /* master data transmit finished */
> +#define REG_INT_MBRF (1 << 3) /* master data receive finished */
> +#define REG_INT_START (1 << 4) /* START condition generated */
> +#define REG_INT_STOP (1 << 5) /* STOP condition generated */
> +#define REG_INT_NAKRCV (1 << 6) /* NACK received */
> +#define REG_INT_ALL 0x7f
> +
> +/* Registers in the GRF (General Register File) */
> +#define GRF_SOC_CON1 4
> +
> +/* Constants */
> +#define WAIT_TIMEOUT 200 /* ms */
> +
> +enum rk3x_i2c_state {
> + STATE_IDLE,
> + STATE_START,
> + STATE_READ,
> + STATE_WRITE,
> + STATE_STOP
> +};
> +
> +struct rk3x_i2c {
> + struct i2c_adapter adap;
> + struct device *dev;
> +
> + /* Hardware resources */
> + void __iomem *regs;
> + struct regmap *grf;
> + unsigned int bus_index;
> + struct clk *clk;
> + int irq;
> +
> + /* Settings */
> + unsigned int scl_frequency;
> +
> + /* Synchronization & notification */
> + spinlock_t lock;
> + wait_queue_head_t wait;
> + bool busy;
> +
> + /* Current message */
> + struct i2c_msg *msg;
> + u8 addr;
> + unsigned int mode;
> +
> + /* I2C state machine */
> + enum rk3x_i2c_state state;
> + unsigned int processed; /* sent/received bytes */
> + int error;
> +};
> +
> +static inline void i2c_writel(struct rk3x_i2c *i2c, u32 value,
> + unsigned int offset)
> +{
> + writel(value, i2c->regs + offset);
> +}
> +
> +static inline u32 i2c_readl(struct rk3x_i2c *i2c, unsigned int offset)
> +{
> + return readl(i2c->regs + offset);
> +}
> +
> +static inline int rk3x_i2c_set_grf_enable(struct rk3x_i2c *i2c, bool on)
> +{
> + u32 con = BIT(27 + i2c->bus_index); /* write mask */
> +
> + if (on)
> + con |= BIT(11 + i2c->bus_index);
> +
> + return regmap_write(i2c->grf, GRF_SOC_CON1, con);
> +}
> +
> +/* Reset all interrupt pending bits */
> +static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
> +{
> + i2c_writel(i2c, REG_INT_ALL, REG_IPD);
> +}
> +
> +/**
> + * Generate a START condition, which triggers a REG_INT_START interrupt.
> + */
> +static void rk3x_i2c_start(struct rk3x_i2c *i2c)
> +{
> + u32 val;
> +
> + rk3x_i2c_clean_ipd(i2c);
> + i2c_writel(i2c, REG_INT_START, REG_IEN);
> +
> + /* enable adapter with correct mode, send START condition */
> + val = REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
> +
> + /* if we want to react to NACK, set ACTACK bit */
> + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
> + val |= REG_CON_ACTACK;
> +
> + i2c_writel(i2c, val, REG_CON);
> +}
> +
> +/**
> + * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
> + *
> + * @error: Error code to return in rk3x_i2c_xfer
> + */
> +static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
> +{
> + unsigned int ctrl;
> +
> + i2c->processed = 0;
> + i2c->msg = 0;
> + i2c->error = error;
> +
> + /* Enable stop interrupt */
> + i2c_writel(i2c, REG_INT_STOP, REG_IEN);
> +
> + i2c->state = STATE_STOP;
> +
> + ctrl = i2c_readl(i2c, REG_CON);
> + ctrl |= REG_CON_STOP;
> + i2c_writel(i2c, ctrl, REG_CON);
> +}
> +
> +/**
> + * Setup a read according to i2c->msg
> + */
> +static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
> +{
> + unsigned int len = i2c->msg->len - i2c->processed;
> + u32 con;
> +
> + con = i2c_readl(i2c, REG_CON);
> +
> + /* the hw can read up to 32 bytes at a time. If we need more than one
> + * chunk, send an ACK after the last byte of the current chunk. */
> + if (unlikely(len > 32)) {
> + len = 32;
> + con &= ~REG_CON_LASTACK;
> + } else
> + con |= REG_CON_LASTACK;
> +
> + /* make sure we are in plain RX mode if we read a second chunk */
> + if (i2c->processed != 0) {
> + con &= ~REG_CON_MOD_MASK;
> + con |= REG_CON_MOD(REG_CON_MOD_RX);
> + }
> +
> + i2c_writel(i2c, con, REG_CON);
> + i2c_writel(i2c, len, REG_MRXCNT);
> +}
> +
> +/**
> + * Fill the transmit buffer with data from i2c->msg
> + */
> +static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c)
> +{
> + unsigned int i, j;
> + u32 cnt = 0;
> + u32 val;
> + u8 byte;
> +
> + for (i = 0; i < 8; ++i) {
> + val = 0;
> + for (j = 0; j < 4; ++j) {
> + if (i2c->processed == i2c->msg->len)
> + break;
> +
> + if (i2c->processed == 0 && cnt == 0)
> + byte = (i2c->addr & 0x7f) << 1;
> + else
> + byte = i2c->msg->buf[i2c->processed++];
> +
> + val |= byte << (j*8);
> + cnt++;
> + }
> +
> + i2c_writel(i2c, val, TXBUFFER_BASE + 4*i);
> +
> + if (i2c->processed == i2c->msg->len)
> + break;
> + }
> +
> + i2c_writel(i2c, cnt, REG_MTXCNT);
> +}
> +
> +
> +/* IRQ handlers for individual states */
> +
> +static void rk3x_i2c_handle_start(struct rk3x_i2c *i2c, unsigned int ipd)
> +{
> + if (!(ipd & REG_INT_START)) {
> + rk3x_i2c_stop(i2c, -ENXIO);
> + dev_warn(i2c->dev, "unexpected irq in START: 0x%x\n", ipd);
> + rk3x_i2c_clean_ipd(i2c);
> + return;
> + }
> +
> + /* ack interrupt */
> + i2c_writel(i2c, REG_INT_START, REG_IPD);
> +
> + /* disable start bit */
> + i2c_writel(i2c, i2c_readl(i2c, REG_CON) & ~REG_CON_START, REG_CON);
> +
> + /* enable appropriate interrupts and transition */
> + if (i2c->mode == REG_CON_MOD_TX) {
> + i2c_writel(i2c, REG_INT_MBTF | REG_INT_NAKRCV, REG_IEN);
> + i2c->state = STATE_WRITE;
> + rk3x_i2c_fill_transmit_buf(i2c);
> + } else {
> + /* in any other case, we are going to be reading. */
> + i2c_writel(i2c, REG_INT_MBRF | REG_INT_NAKRCV, REG_IEN);
> + i2c->state = STATE_READ;
> + rk3x_i2c_prepare_read(i2c);
> + }
> +}
> +
> +static void rk3x_i2c_handle_write(struct rk3x_i2c *i2c, unsigned int ipd)
> +{
> + if (!(ipd & REG_INT_MBTF)) {
> + rk3x_i2c_stop(i2c, -ENXIO);
> + dev_err(i2c->dev, "unexpected irq in WRITE: 0x%x\n", ipd);
> + rk3x_i2c_clean_ipd(i2c);
> + return;
> + }
> +
> + /* ack interrupt */
> + i2c_writel(i2c, REG_INT_MBTF, REG_IPD);
> +
> + /* are we finished? */
> + if (i2c->processed == i2c->msg->len)
> + rk3x_i2c_stop(i2c, i2c->error);
> + else
> + rk3x_i2c_fill_transmit_buf(i2c);
> +}
> +
> +static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
> +{
> + unsigned int i;
> + unsigned int len = i2c->msg->len - i2c->processed;
> + unsigned int val;
> + u8 byte;
> +
> + /* we only care for MBRF here. */
> + if (!(ipd & REG_INT_MBRF))
> + return;
> +
> + /* ack interrupt */
> + i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
> +
> + /* read the data from receive buffer */
> + for (i = 0; i < len; ++i) {
> + if (i%4 == 0)
> + val = i2c_readl(i2c, RXBUFFER_BASE + (i/4)*4);
> +
> + byte = (val >> ((i%4) * 8)) & 0xff;
> + i2c->msg->buf[i2c->processed++] = byte;
> + }
> +
> + /* are we finished? */
> + if (i2c->processed == i2c->msg->len)
> + rk3x_i2c_stop(i2c, i2c->error);
> + else
> + rk3x_i2c_prepare_read(i2c);
> +}
> +
> +static void rk3x_i2c_handle_stop(struct rk3x_i2c *i2c, unsigned int ipd)
> +{
> + unsigned int con;
> +
> + if (!(ipd & REG_INT_STOP)) {
> + rk3x_i2c_stop(i2c, -ENXIO);
> + dev_err(i2c->dev, "unexpected irq in STOP: 0x%x\n", ipd);
> + rk3x_i2c_clean_ipd(i2c);
> + return;
> + }
> +
> + /* ack interrupt */
> + i2c_writel(i2c, REG_INT_STOP, REG_IPD);
> +
> + /* disable STOP bit */
> + con = i2c_readl(i2c, REG_CON);
> + con &= ~REG_CON_STOP;
> + i2c_writel(i2c, con, REG_CON);
> +
> + i2c->busy = 0;
> + i2c->state = STATE_IDLE;
> +
> + /* signal rk3x_i2c_xfer that we are finished */
> + wake_up(&i2c->wait);
> +}
> +
> +static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
> +{
> + struct rk3x_i2c *i2c = dev_id;
> + unsigned int ipd;
> +
> + spin_lock(&i2c->lock);
> +
> + ipd = i2c_readl(i2c, REG_IPD);
> + if (i2c->state == STATE_IDLE) {
> + dev_warn(i2c->dev, "irq in STATE_IDLE, ipd = 0x%x\n", ipd);
> + rk3x_i2c_clean_ipd(i2c);
> + goto out;
> + }
> +
> + dev_dbg(i2c->dev, "IRQ: state %d, ipd: %x\n", i2c->state, ipd);
> +
> + /* Clean interrupt bits we don't care about */
> + ipd &= ~(REG_INT_BRF | REG_INT_BTF);
> +
> + if (ipd & REG_INT_NAKRCV) {
> + /* We got a NACK in the last operation. Depending on whether
> + * IGNORE_NAK is set, we have to stop the operation and report
> + * an error. */
> + i2c_writel(i2c, REG_INT_NAKRCV, REG_IPD);
> +
> + ipd &= ~REG_INT_NAKRCV;
> +
> + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
> + rk3x_i2c_stop(i2c, -EAGAIN);
> + }
> +
> + /* is there anything left to handle? */
> + if (unlikely(ipd == 0))
> + goto out;
> +
> + switch (i2c->state) {
> + case STATE_START:
> + rk3x_i2c_handle_start(i2c, ipd);
> + break;
> + case STATE_WRITE:
> + rk3x_i2c_handle_write(i2c, ipd);
> + break;
> + case STATE_READ:
> + rk3x_i2c_handle_read(i2c, ipd);
> + break;
> + case STATE_STOP:
> + rk3x_i2c_handle_stop(i2c, ipd);
> + break;
> + case STATE_IDLE:
> + break;
> + }
> +
> +out:
> + spin_unlock(&i2c->lock);
> + return IRQ_HANDLED;
> +}
> +
> +static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long
> scl_rate) +{
> + unsigned long i2c_rate = clk_get_rate(i2c->clk);
> + unsigned int div;
> +
> + /* SCL rate = (clk rate) / (8 * DIV) */
> + div = DIV_ROUND_UP(i2c_rate, scl_rate * 8);
> +
> + /* The lower and upper half of the CLKDIV reg describe the length of
> + * SCL low & high periods. */
> + div = DIV_ROUND_UP(div, 2);
> +
> + i2c_writel(i2c, (div << 16) | (div & 0xffff), REG_CLKDIV);
> +}
> +
> +/**
> + * Setup I2C registers for an I2C operation specified by msgs, num.
> + *
> + * Must be called with i2c->lock held.
> + *
> + * @msgs: I2C msgs to process
> + * @num: Number of msgs
> + *
> + * returns: Number of I2C msgs processed or negative in case of error
> + */
> +static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int
> num) +{
> + u32 addr = (msgs[0].addr & 0x7f) << 1;
> + int ret = 0;
> +
> + /*
> + * The I2C adapter can issue a small (len < 4) write packet before
> + * reading. This speeds up SMBus-style register reads.
> + * The MRXADDR/MRXRADDR hold the slave address and the slave register
> + * address in this case.
> + */
> +
> + if (num >= 2 && msgs[0].len < 4
> + && !(msgs[0].flags & I2C_M_RD)
> + && (msgs[1].flags & I2C_M_RD)) {
> + u32 reg_addr = 0;
> +
> + dev_dbg(i2c->dev, "Combined write/read from addr 0x%x\n",
> + addr >> 1);
> +
> + if (msgs[0].len == 0)
> + return -EINVAL;
> +
> + /* Fill MRXRADDR with the register address(es) */
> + reg_addr = msgs[0].buf[0];
> + reg_addr |= REG_MRXADDR_LOW;
> +
> + if (msgs[0].len >= 2) {
> + reg_addr |= msgs[0].buf[1] << 8;
> + reg_addr |= REG_MRXADDR_MID;
> +
> + if (msgs[0].len >= 3) {
> + reg_addr |= msgs[0].buf[2] << 16;
> + reg_addr |= REG_MRXADDR_HIGH;
> + }
> + }
> +
> + /* msgs[0] is handled by hw. */
> + i2c->msg = &msgs[1];
> +
> + i2c->mode = REG_CON_MOD_REGISTER_TX;
> +
> + i2c_writel(i2c, addr | REG_MRXADDR_LOW, REG_MRXADDR);
> + i2c_writel(i2c, reg_addr, REG_MRXRADDR);
> +
> + ret = 2;
> + } else {
> + /* We'll have to do it the boring way and process the msgs
> + * one-by-one. */
> +
> + if (msgs[0].flags & I2C_M_RD) {
> + addr |= 1; /* set read bit */
> +
> + /* We have to transmit the slave addr first. Use
> + * MOD_REGISTER_TX for that purpose. */
> + i2c->mode = REG_CON_MOD_REGISTER_TX;
> + i2c_writel(i2c, addr | REG_MRXADDR_LOW, REG_MRXADDR);
> + i2c_writel(i2c, 0, REG_MRXRADDR);
> + } else {
> + i2c->mode = REG_CON_MOD_TX;
> + }
> +
> + i2c->msg = &msgs[0];
> +
> + ret = 1;
> + }
> +
> + i2c->addr = msgs[0].addr;
> + i2c->busy = true;
> + i2c->state = STATE_START;
> + i2c->processed = 0;
> + i2c->error = 0;
> +
> + rk3x_i2c_clean_ipd(i2c);
> +
> + return ret;
> +}
> +
> +static int rk3x_i2c_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
> + unsigned long timeout, flags;
> + int ret = 0;
> + int i;
> +
> + spin_lock_irqsave(&i2c->lock, flags);
> +
> + clk_enable(i2c->clk);
> +
> + /* The clock rate might have changed, so setup the divider again */
> + rk3x_i2c_set_scl_rate(i2c, i2c->scl_frequency);
> +
> + /* Process msgs. We can handle more than one message at once (see
> + * rk3x_i2c_setup()). */
> + for (i = 0; i < num; i += ret) {
> + ret = rk3x_i2c_setup(i2c, msgs + i, num);
> +
> + if (ret < 0) {
> + dev_err(i2c->dev, "rk3x_i2c_setup() failed\n");
> + break;
> + }
> +
> + spin_unlock_irqrestore(&i2c->lock, flags);
> +
> + rk3x_i2c_start(i2c);
> +
> + timeout = wait_event_timeout(i2c->wait, !i2c->busy,
> + msecs_to_jiffies(WAIT_TIMEOUT));
> +
> + spin_lock_irqsave(&i2c->lock, flags);
> +
> + if (timeout == 0) {
> + dev_err(i2c->dev, "timeout, ipd: 0x%08X",
> + i2c_readl(i2c, REG_IPD));
> +
> + /* Force a STOP condition without interrupt */
> + i2c_writel(i2c, 0, REG_IEN);
> + i2c_writel(i2c, REG_CON_EN | REG_CON_STOP, REG_CON);
> +
> + i2c->state = STATE_IDLE;
> +
> + ret = -ETIMEDOUT;
> + break;
> + }
> +
> + if (i2c->error) {
> + ret = i2c->error;
> + break;
> + }
> + }
> +
> + clk_disable(i2c->clk);
> + spin_unlock_irqrestore(&i2c->lock, flags);
> +
> + return ret;
> +}
> +
> +static u32 rk3x_i2c_func(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
> +}
> +
> +static const struct i2c_algorithm rk3x_i2c_algorithm = {
> + .master_xfer = rk3x_i2c_xfer,
> + .functionality = rk3x_i2c_func,
> +};
> +
> +static int rk3x_i2c_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct rk3x_i2c *i2c;
> + struct resource *mem;
> + int ret = 0;
> +
> + if (!pdev->dev.of_node) {
> + dev_err(&pdev->dev, "rk3x-i2c needs a devicetree node\n");
> + return -EINVAL;
> + }
> +
> + i2c = devm_kzalloc(&pdev->dev, sizeof(struct rk3x_i2c), GFP_KERNEL);
> + if (!i2c) {
> + dev_err(&pdev->dev, "Could not alloc driver memory\n");
> + return -ENOMEM;
> + }
> +
> + if (of_property_read_u32(pdev->dev.of_node, "rockchip,bus-index",
> + &i2c->bus_index)) {
> + dev_err(&pdev->dev,
> + "rk3x-i2c requires 'rockchip,bus-index' property\n");
> + return -EINVAL;
> + }
> +
> + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
> + &i2c->scl_frequency)) {
> + i2c->scl_frequency = 100 * 1000;
> + dev_info(&pdev->dev, "using default SCL frequency: 100kHz\n");
> + }
> +
> + strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name));
> + i2c->adap.owner = THIS_MODULE;
> + i2c->adap.algo = &rk3x_i2c_algorithm;
> + i2c->adap.retries = 3;
> + i2c->adap.dev.of_node = np;
> + i2c->adap.algo_data = i2c;
> + i2c->adap.dev.parent = &pdev->dev;
> +
> + i2c->dev = &pdev->dev;
> +
> + spin_lock_init(&i2c->lock);
> + init_waitqueue_head(&i2c->wait);
> +
> + i2c->clk = devm_clk_get(&pdev->dev, 0);
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev, "cannot get clock\n");
> + return -ENOENT;
> + }
> +
> + clk_prepare_enable(i2c->clk);
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(i2c->regs)) {
> + ret = PTR_ERR(i2c->regs);
> + goto err_clk;
> + }
> +
> + /* Enable the I2C bus in the SOC general register file */
> + i2c->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> + if (IS_ERR(i2c->grf)) {
> + dev_err(&pdev->dev,
> + "rk3x-i2c requires a 'rockchip,grf' property\n");
> + ret = PTR_ERR(i2c->grf);
> + goto err_clk;
> + }
> +
> + ret = rk3x_i2c_set_grf_enable(i2c, true);
> + if (ret != 0) {
> + dev_err(&pdev->dev, "could not enable I2C adapter in GRF: %d\n",
> + ret);
> + ret = -EIO;
> + goto err_clk;
> + }
> +
> + /* IRQ setup */
> + i2c->irq = ret = platform_get_irq(pdev, 0);
> + if (ret <= 0) {
> + dev_err(&pdev->dev, "cannot find rk3x IRQ\n");
> + ret = -EINVAL;
> + goto err_grf;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, i2c->irq, rk3x_i2c_irq,
> + 0, dev_name(&pdev->dev), i2c);
> + if (ret != 0) {
> + dev_err(&pdev->dev, "cannot request IRQ\n");
> + goto err_grf;
> + }
> +
> + platform_set_drvdata(pdev, i2c);
> +
> + if (i2c_add_adapter(&i2c->adap) != 0) {
> + pr_err("rk3x-i2c: Could not register adapter\n");
> + goto err_grf;
> + }
> +
> + dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at 0x%08x\n",
> + (unsigned int)i2c->regs);
> +
> + clk_disable(i2c->clk);
> + return 0;
> +
> +err_grf:
> + rk3x_i2c_set_grf_enable(i2c, false);
> +err_clk:
> + clk_disable_unprepare(i2c->clk);
> + return ret;
> +}
> +
> +static int rk3x_i2c_remove(struct platform_device *pdev)
> +{
> + struct rk3x_i2c *i2c = platform_get_drvdata(pdev);
> +
> + rk3x_i2c_set_grf_enable(i2c, false);
> +
> + clk_unprepare(i2c->clk);
> + i2c_del_adapter(&i2c->adap);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rk3x_i2c_match[] = {
> + { .compatible = "rockchip,rk3x-i2c" },
> +};
> +
> +static struct platform_driver rk3x_i2c_driver = {
> + .probe = rk3x_i2c_probe,
> + .remove = rk3x_i2c_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "rk3x-i2c",
> + .of_match_table = rk3x_i2c_match,
> + },
> +};
> +
> +module_platform_driver(rk3x_i2c_driver);
> +
> +MODULE_DESCRIPTION("Rockchip RK3xxx I2C Bus driver");
> +MODULE_AUTHOR("Max Schwarz <max.schwarz@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/