[PATCH v3 8/8] ARM: sunxi: dt: add APP4-EVB1 board support

From: Maxime Ripard
Date: Mon May 12 2014 - 15:36:24 EST


From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>

The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD
card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB,
and a LCD display.

Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 57 +++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8bc808cb7ce2..1d9c50dda655 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -344,6 +344,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
+ sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-m9.dtb \
sun7i-a20-cubieboard2.dtb \
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000000..2bbf8867362b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+ compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ pio: pinctrl@01c20800 {
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ usbphy: phy@01c19400 {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c1a000 {
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ gpio = <&pio 7 27 0>;
+ status = "okay";
+ };
+};
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/